Showing 1–50 of 79 results for author: Bao, Y

A conveyor-belt magneto-optical trap of CaF

Authors: Scarlett S. Yu, Jiaqi You, Yicheng Bao, Loic Anderegg, Christian Hallas, Grace K. Li, Dongkyu Lim, Eunmi Chae, Wolfgang Ketterle, Kang-Kuen Ni, John M. Doyle

Abstract: We report the experimental realization of a conveyor-belt magneto-optical trap for calcium monofluoride (CaF) molecules. The obtained highly-compressed cloud has a mean radius of 64(5) $μ$m and a peak number density of $3.6(5) \times 10^{10}$ cm$^{-3}$, a 600-fold increase over the conventional red-detuned MOTs of CaF, and the densest molecular MOT observed to date. Subsequent loading of these mol… ▽ More We report the experimental realization of a conveyor-belt magneto-optical trap for calcium monofluoride (CaF) molecules. The obtained highly-compressed cloud has a mean radius of 64(5) $μ$m and a peak number density of $3.6(5) \times 10^{10}$ cm$^{-3}$, a 600-fold increase over the conventional red-detuned MOTs of CaF, and the densest molecular MOT observed to date. Subsequent loading of these molecules into an optical dipole trap yields up to $2.6 \times 10^4$ trapped molecules at a temperature of 14(2) $μ$K with a peak phase-space density of $\sim 2.4 \times 10^{-6}$. This opens new possibilities for a range of applications utilizing high-density, optically trapped ultracold molecules. △ Less

Submitted 24 September, 2024; v1 submitted 23 September, 2024; originally announced September 2024.

Comments: 7 pages; 4 figures; typos corrected

Bayer-type Vis-NIR Routing via Inverse Design for Submicron-pixel Image Sensing Chip

Authors: Xianguang Yang, Shijie Xiong, Fangchang Tan, Zhitao Lin, Yanjun Bao, Long Wen, Qin Chen, Baojun Li

Abstract: With the advent of high-precision nanoscale lithography technology, high-resolution image sensing has experienced rapid development in recent years. Currently, mainstream commercial image sensors predominantly utilize Bayer array color filters to implement RGB colorful imaging strategies. However, as pixel sizes transition into the submicron dimensions, traditional dye filters used in image sensor… ▽ More With the advent of high-precision nanoscale lithography technology, high-resolution image sensing has experienced rapid development in recent years. Currently, mainstream commercial image sensors predominantly utilize Bayer array color filters to implement RGB colorful imaging strategies. However, as pixel sizes transition into the submicron dimensions, traditional dye filters used in image sensors have long been hampered by limited optical efficiency, suboptimal signal-to-noise ratios, and significant difficulties in miniaturization. In this work, a novel 4-channel RGB-IR color router for image sensing, distinct from the traditional absorption-transmission mechanisms, was proposed through inverse design methodologies. Utilizing genetic algorithms and DCGAN models, approximately 20,000 random color routing structures were generated and trained. From these, an optimized spectral splitting structure with a minimal periodic size of 1.6 um * 1.6 um was identified. This structure achieves peak optical efficiencies 1.7 times greater than those of dye filters, while also offering superior color imaging quality and signal intensity. This innovative design approach, leveraging deep learning integration, demonstrates an on-chip strategy for color realization in 4-channel image sensors, and holds significant promise for enhancing the development of next-generation high-performance image sensing chip systems. △ Less

Submitted 19 September, 2024; originally announced September 2024.

Comments: 19 pages,5 figures

Accurate, precise pressure sensing with tethered optomechanics

Authors: Olivia R. Green, Yiliang Bao, John R. Lawall, Jason J. Gorman, Daniel S. Barker

Abstract: We show that optomechanical systems can be primary pressure sensors with uncertainty as low as 1.1 % of reading via comparison with a pressure transfer standard. Our silicon nitride and silicon carbide sensors are short-term and long-term stable, displaying Allan deviations compatible with better than 1 % precision and baseline drift significantly lower than the transfer standard. We also investig… ▽ More We show that optomechanical systems can be primary pressure sensors with uncertainty as low as 1.1 % of reading via comparison with a pressure transfer standard. Our silicon nitride and silicon carbide sensors are short-term and long-term stable, displaying Allan deviations compatible with better than 1 % precision and baseline drift significantly lower than the transfer standard. We also investigate the performance of optomechanical devices as calibrated gauges, finding that they can achieve total uncertainty less than 1 %. The calibration procedure also yields the thin-film density of our sensors with state-of-the-art precision, aiding development of other calibration-free optomechanical sensors. Our results demonstrate that optomechanical pressure sensors can achieve accuracy, precision, and drift sufficient to replace high performance legacy gauges. △ Less

Submitted 30 August, 2024; originally announced September 2024.

Comments: 15 pages, 7 figures

Metasurface-Based Full-Parameter Optical Multiplexing

Authors: Rui Wei, Hongsheng Shi, Boyou Wang, Baojun Li, Yanjun Bao

Abstract: Optical multiplexing is a key technique that enhances the capacity of optical systems by independently modulating various optical parameters to carry distinct information. Among these parameters, wavelength, polarization, and angle are the primary ones for multiplexing in plane waves with uniform cross-sectional distribution. While metasurfaces have recently emerged as a powerful platform for opti… ▽ More Optical multiplexing is a key technique that enhances the capacity of optical systems by independently modulating various optical parameters to carry distinct information. Among these parameters, wavelength, polarization, and angle are the primary ones for multiplexing in plane waves with uniform cross-sectional distribution. While metasurfaces have recently emerged as a powerful platform for optical multiplexing, they are typically restricted to partial parameter multiplexing and exhibit a low number of multiplexing channels. In this work, we propose and experimentally demonstrate the full-parameter multiplexing of polarization, wavelength, and angle, achieving hundreds of distinct multiplexing channels,the largest reported to date. Our design utilizes a gradient-based optimization algorithm to enable high-efficiency performance and independent functionalities with minimal cross-talk among channels. This approach represents a significant advancement in metasurface design and optical multiplexing, with potential applications in complex and dynamic optical systems. △ Less

Submitted 18 August, 2024; originally announced August 2024.

High-Capacity Metasurface at Limits of Polarization and Wavelength Multiplexing

Authors: Yanjun Bao, Hongsheng Shi, Rui Wei, Boyou Wang, Zhou Zhou, Cheng-Wei Qiu, Baojun Li

Abstract: Polarization and wavelength multiplexing are the two most widely employed techniques to improve the capacity in the metasurfaces. Existing works have pushed each technique to its individual limits. For example, the polarization multiplexing channels working at a single wavelength have been significantly increased by using noise engineering. However, it is still challenging to achieve the multiplex… ▽ More Polarization and wavelength multiplexing are the two most widely employed techniques to improve the capacity in the metasurfaces. Existing works have pushed each technique to its individual limits. For example, the polarization multiplexing channels working at a single wavelength have been significantly increased by using noise engineering. However, it is still challenging to achieve the multiplexing limits of wavelength and polarization simultaneously. Besides, such multiplexing methods suffer from computational inefficiencies, hindering their application in tasks like image recognition that require extensive training computation. In this work, we introduce a gradient-based optimization algorithm using deep neural network (DNN) to achieve the limits of both polarization and wavelength multiplexing with high computational efficiency. We experimentally demonstrate this capability, achieving a record-breaking capacity of 15 holographic images across five wavelengths and the maximum of three independent polarization channels, as well as 18 holographic images across three wavelengths and six corelated polarization channels. Moreover, leveraging the high computational efficiency of our DNN-based method, which is well-suited for processing large datasets, we implement large-scale image recognition tasks across 36 classes encoded in a record of nine multiplexed channels (three wavelengths * three polarizations), achieving 96% classification accuracy in calculations and 91.5% in experiments. This work sets a new benchmark for high-capacity multiplexing with metasurfaces and demonstrates the power of gradient-based inverse design for realizing multi-functional optical elements. △ Less

Submitted 18 August, 2024; originally announced August 2024.

Single-Shot Simultaneous Intensity, Phase, and Polarization Imaging with Metasurface

Authors: Yanjun Bao, Baojun Li

Abstract: Optical imaging of the intensity, phase and polarization distributions of optical field is fundamental to numerous applications. Traditional methods rely on bulky optical components and require multiple measurements. Recently, metasurface-based (MS-based) imaging strategies have emerged as a promising solution to address these challenges. However, they have been primarily limited to capturing part… ▽ More Optical imaging of the intensity, phase and polarization distributions of optical field is fundamental to numerous applications. Traditional methods rely on bulky optical components and require multiple measurements. Recently, metasurface-based (MS-based) imaging strategies have emerged as a promising solution to address these challenges. However, they have been primarily limited to capturing partial information of the three parameters, tailored to specific optical fields, which poses challenges when addressing with arbitrary field distributions and achieving three-parameter imaging. In this study, we introduce a MS-based approach for single-shot optical imaging that simultaneously captures all the three parameters of optical fields with arbitrary intensity, phase, and polarization distributions. We experimentally validate the versatility of our method by conducting imaging of various types of optical fields with arbitrary well-defined distributions. The strategy presented in our work is expected to open up promising avenues for diverse applications, including imaging, optical communications, and beyond. △ Less

Submitted 16 August, 2024; originally announced August 2024.

Data quality control system and long-term performance monitor of the LHAASO-KM2A

Authors: Zhen Cao, F. Aharonian, Axikegu, Y. X. Bai, Y. W. Bao, D. Bastieri, X. J. Bi, Y. J. Bi, W. Bian, A. V. Bukevich, Q. Cao, W. Y. Cao, Zhe Cao, J. Chang, J. F. Chang, A. M. Chen, E. S. Chen, H. X. Chen, Liang Chen, Lin Chen, Long Chen, M. J. Chen, M. L. Chen, Q. H. Chen, S. Chen , et al. (263 additional authors not shown)

Abstract: The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To… ▽ More The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To ensure the reliability of the LHAASO-KM2A data, a three-level quality control system has been established. It is used to monitor the status of detector units, stability of reconstructed parameters and the performance of the array based on observations of the Crab Nebula and Moon shadow. This paper will introduce the control system and its application on the LHAASO-KM2A data collected from August 2021 to July 2023. During this period, the pointing and angular resolution of the array were stable. From the observations of the Moon shadow and Crab Nebula, the results achieved using the two methods are consistent with each other. According to the observation of the Crab Nebula at energies from 25 TeV to 100 TeV, the time averaged pointing errors are estimated to be $-0.003^{\circ} \pm 0.005^{\circ}$ and $0.001^{\circ} \pm 0.006^{\circ}$ in the R.A. and Dec directions, respectively. △ Less

Submitted 13 June, 2024; v1 submitted 20 May, 2024; originally announced May 2024.

Comments: 15 pages, 9 figures

High sensitivity and large scanning range optical antennas enabled by multi-casting ridge-waveguide subwavelength structure arrays

Authors: Weijie Xu, Xianxian Jiang, Yelong Bao, Junjia Wang

Abstract: With the rapid development of large-scale integrated photonics, optical phased array (OPA) is an effective way to realize highly integrated, stable and low-cost beam control system. Achieving a large field of view (FOV) in the longitudinal direction without increasing fabrication cost and system complexity is still a significant challenge in OPA antennas. Here, a high sensitivity and large scannin… ▽ More With the rapid development of large-scale integrated photonics, optical phased array (OPA) is an effective way to realize highly integrated, stable and low-cost beam control system. Achieving a large field of view (FOV) in the longitudinal direction without increasing fabrication cost and system complexity is still a significant challenge in OPA antennas. Here, a high sensitivity and large scanning range antenna based on subwavelength structure array is proposed to enhance the longitudinal scanning and free-space radiating efficiency by using the ridge-waveguide structure and backward-emitting. A millimeter-long grating antenna with a far-field beam divergence of 0.13� and a wavelength sensitivity of 0.237�/nm is experimentally demonstrated. Furthermore, by using different sideband periods, we introduce a multi-casting grating antenna with a large scanning range up to 42.6�. The proposed devices show significant improvement in longitudinal wavelength sensitivity compared with the typical waveguide grating antennas. △ Less

Submitted 15 March, 2024; originally announced March 2024.

Inferring the Langevin Equation with Uncertainty via Bayesian Neural Networks

Authors: Youngkyoung Bae, Seungwoong Ha, Hawoong Jeong

Abstract: Pervasive across diverse domains, stochastic systems exhibit fluctuations in processes ranging from molecular dynamics to climate phenomena. The Langevin equation has served as a common mathematical model for studying such systems, enabling predictions of their temporal evolution and analyses of thermodynamic quantities, including absorbed heat, work done on the system, and entropy production. How… ▽ More Pervasive across diverse domains, stochastic systems exhibit fluctuations in processes ranging from molecular dynamics to climate phenomena. The Langevin equation has served as a common mathematical model for studying such systems, enabling predictions of their temporal evolution and analyses of thermodynamic quantities, including absorbed heat, work done on the system, and entropy production. However, inferring the Langevin equation from observed trajectories remains challenging, particularly for nonlinear and high-dimensional systems. In this study, we present a comprehensive framework that employs Bayesian neural networks for inferring Langevin equations in both overdamped and underdamped regimes. Our framework first provides the drift force and diffusion matrix separately and then combines them to construct the Langevin equation. By providing a distribution of predictions instead of a single value, our approach allows us to assess prediction uncertainties, which can prevent potential misunderstandings and erroneous decisions about the system. We demonstrate the effectiveness of our framework in inferring Langevin equations for various scenarios including a neuron model and microscopic engine, highlighting its versatility and potential impact. △ Less

Submitted 2 February, 2024; originally announced February 2024.

Comments: 30 pages, 17 figures

Roadmap on Nanoscale Magnetic Resonance Imaging

Authors: Raffi Budakian, Amit Finkler, Alexander Eichler, Martino Poggio, Christian L. Degen, Sahand Tabatabaei, Inhee Lee, P. Chris Hammel, Eugene S. Polzik, Tim H. Taminiau, Ronald L. Walsworth, Paz London, Ania Bleszynski Jayich, Ashok Ajoy, Arjun Pillai, J�rg Wrachtrup, Fedor Jelezko, Yujeong Bae, Andreas J. Heinrich, Christian R. Ast, Patrice Bertet, Paola Cappellaro, Cristian Bonato, Yoann Altmann, Erik Gauger

Abstract: The field of nanoscale magnetic resonance imaging (NanoMRI) was started 30 years ago. It was motivated by the desire to image single molecules and molecular assemblies, such as proteins and virus particles, with near-atomic spatial resolution and on a length scale of 100 nm. Over the years, the NanoMRI field has also expanded to include the goal of useful high-resolution nuclear magnetic resonance… ▽ More The field of nanoscale magnetic resonance imaging (NanoMRI) was started 30 years ago. It was motivated by the desire to image single molecules and molecular assemblies, such as proteins and virus particles, with near-atomic spatial resolution and on a length scale of 100 nm. Over the years, the NanoMRI field has also expanded to include the goal of useful high-resolution nuclear magnetic resonance (NMR) spectroscopy of molecules under ambient conditions, including samples up to the micron-scale. The realization of these goals requires the development of spin detection techniques that are many orders of magnitude more sensitive than conventional NMR and MRI, capable of detecting and controlling nanoscale ensembles of spins. Over the years, a number of different technical approaches to NanoMRI have emerged, each possessing a distinct set of capabilities for basic and applied areas of science. The goal of this roadmap article is to report the current state of the art in NanoMRI technologies, outline the areas where they are poised to have impact, identify the challenges that lie ahead, and propose methods to meet these challenges. This roadmap also shows how developments in NanoMRI techniques can lead to breakthroughs in emerging quantum science and technology applications. △ Less

Submitted 14 December, 2023; originally announced December 2023.

Journal ref: Nanotechnology 35, 412001 (2024)

A hybrid lattice Boltzmann and finite difference method for two-phase flows with soluble surfactants

Authors: Yan Ba, Haihu Liu, Wenqiang Li, Wenjing Yang

Abstract: A hybrid method is developed to simulate two-phase flows with soluble surfactants. In this method, the interface and bulk surfactant concentration equations of diffuse-interface form, which include source terms to consider surfactant adsorption and desorption dynamics, are solved in the entire fluid domain by the finite difference method, while two-phase flows are solved by a lattice Boltzmann col… ▽ More A hybrid method is developed to simulate two-phase flows with soluble surfactants. In this method, the interface and bulk surfactant concentration equations of diffuse-interface form, which include source terms to consider surfactant adsorption and desorption dynamics, are solved in the entire fluid domain by the finite difference method, while two-phase flows are solved by a lattice Boltzmann color-gradient model, which can accurately simulate binary fluids with unequal densities. The flow and interface surfactant concentration fields are coupled by a modified Langmuir equation of state, which allows for surfactant concentration beyond critical micelle concentration. The capability and accuracy of the hybrid method are first validated by simulating three numerical examples, including the adsorption of bulk surfactants onto the interface of a stationary droplet, the droplet migration in a constant surfactant gradient, and the deformation of a surfactant-laden droplet in a simple shear flow, in which the numerical results are compared with theoretical solutions and available literature data. Then, the hybrid method is applied to simulate the buoyancy-driven bubble rise in a surfactant solution, in which the influence of surfactants is identified for varying wall confinement, Eotvos number and Biot number. It is found that surfactants exhibit a retardation effect on the bubble rise due to the Marangoni stress that resists interface motion, and the retardation effect weakens as the Eotvos or Biot number increases. We further show that the weakened retardation effect at higher Biot numbers is attributed to a decreased non-uniform effect of surfactants at the interface. △ Less

Submitted 26 November, 2023; originally announced November 2023.

Raman sideband cooling of molecules in an optical tweezer array to the 3-D motional ground state

Authors: Yicheng Bao, Scarlett S. Yu, Jiaqi You, Loïc Anderegg, Eunmi Chae, Wolfgang Ketterle, Kang-Kuen Ni, John M. Doyle

Abstract: Ultracold polar molecules are promising for quantum information processing and searches for physics beyond the Standard Model. Laser cooling to ultracold temperatures is an established technique for trapped diatomic and triatomic molecules. Further cooling of the molecules to near the motional ground state is crucial for reducing various dephasings in quantum and precision applications. In this wo… ▽ More Ultracold polar molecules are promising for quantum information processing and searches for physics beyond the Standard Model. Laser cooling to ultracold temperatures is an established technique for trapped diatomic and triatomic molecules. Further cooling of the molecules to near the motional ground state is crucial for reducing various dephasings in quantum and precision applications. In this work, we demonstrate Raman sideband cooling of CaF molecules in optical tweezers to near their motional ground state, with average motional occupation quantum numbers of $\bar{n}_{x}=0.16(12)$, $\bar{n}_{y}=0.17(17)$ (radial directions), $\bar{n}_{z}=0.22(16)$ (axial direction) and a 3-D motional ground state probability of $54\pm18\%$. This paves the way to increase molecular coherence times in optical tweezers for robust quantum computation and simulation applications. △ Less

Submitted 15 September, 2023; originally announced September 2023.

Comments: 10 pages, 6 figures

Low-power, agile electro-optic frequency comb spectrometer for integrated sensors

Authors: Kyunghun Han, David A. Long, Sean M. Bresler, Junyeob Song, Yiliang Bao, Benjamin J. Reschovsky, Kartik Srinivasan, Jason J. Gorman, Vladimir A. Aksyuk, Thomas W. LeBrun

Abstract: Sensing platforms based upon photonic integrated circuits have shown considerable promise; however, they require corresponding advancements in integrated optical readout technologies. Here, we present an on-chip spectrometer that leverages an integrated thin-film lithium niobate modulator to produce a frequency-agile electro-optic frequency comb for interrogating chip-scale temperature and acceler… ▽ More Sensing platforms based upon photonic integrated circuits have shown considerable promise; however, they require corresponding advancements in integrated optical readout technologies. Here, we present an on-chip spectrometer that leverages an integrated thin-film lithium niobate modulator to produce a frequency-agile electro-optic frequency comb for interrogating chip-scale temperature and acceleration sensors. The chirped comb process allows for ultralow radiofrequency drive voltages, which are as much as seven orders of magnitude less than the lowest found in the literature and are generated using a chip-scale, microcontroller-driven direct digital synthesizer. The on-chip comb spectrometer is able to simultaneously interrogate both an on-chip temperature sensor and an off-chip, microfabricated optomechanical accelerometer with cutting-edge sensitivities of $\approx 5\ μ \mathrm{K} \cdot \mathrm{Hz}^{-1/2}$ and $\approx 130\ μ\mathrm{m} \cdot \mathrm{s}^{-2} \cdot \mathrm{Hz}^{-1/2}$, respectively. This platform is compatible with a broad range of existing photonic integrated circuit technologies, where its combination of frequency agility and ultralow radiofrequency power requirements are expected to have applications in fields such as quantum science and optical computing. △ Less

Submitted 16 April, 2024; v1 submitted 14 September, 2023; originally announced September 2023.

Comments: 12 pages, 5 figures

Journal ref: Optica 11, 392-398 (2024)

Design of multifunctional color routers with Kerker switching using generative adversarial networks

Authors: Jiahao Yan, Dayu Zhu, Yanjun Bao, Qin Chen, Baojun Li, Wenshan Cai

Abstract: To achieve optoelectronic devices with high resolution and efficiency, there is a pressing need for optical structural units that possess an ultrasmall footprint yet exhibit strong controllability in both the frequency and spatial domains. For dielectric nanoparticles, the overlap of electric and magnetic dipole moments can scatter light completely forward or backward, which is called Kerker theor… ▽ More To achieve optoelectronic devices with high resolution and efficiency, there is a pressing need for optical structural units that possess an ultrasmall footprint yet exhibit strong controllability in both the frequency and spatial domains. For dielectric nanoparticles, the overlap of electric and magnetic dipole moments can scatter light completely forward or backward, which is called Kerker theory. This effect can expand to any multipoles and any directions, re-named as generalized Kerker effect, and realize controllable light manipulation at full space and full spectrum using well-designed dielectric structures. However, the complex situations of multipole couplings make it difficult to achieve structural design. Here, generative artificial intelligence (AI) is utilized to facilitate multi-objective-oriented structural design, wherein we leverage the concept of "combined spectra" that consider both spectra and direction ratios as labels. The proposed generative adversarial network (GAN) is named as DDGAN (double-discriminator GAN) which discriminates both images and spectral labels. Using trained networks, we achieve the simultaneous design for scattering color and directivities, RGB color routers, as well as narrowband light routers. Notably, all generated structures possess a footprint less than 600x600 nm indicating their potential applications in optoelectronic devices with ultrahigh resolution. △ Less

Submitted 7 September, 2023; originally announced September 2023.

GPU enabled real-time optical frequency comb spectroscopy and photonic readout

Authors: Sean M. Bresler, David A. Long, Benjamin J. Reschovsky, Yiliang. Bao, Thomas W. LeBrun

Abstract: We describe a GPU-enabled approach for real-time optical frequency comb spectroscopy in which data is recorded, Fourier transformed, normalized, and fit at data rates up to 2.2 GB/s. As an initial demonstration we have applied this approach to rapidly interrogate the motion of an optomechanical accelerometer through the use of an electro-optic frequency comb. However, we note that this approach is… ▽ More We describe a GPU-enabled approach for real-time optical frequency comb spectroscopy in which data is recorded, Fourier transformed, normalized, and fit at data rates up to 2.2 GB/s. As an initial demonstration we have applied this approach to rapidly interrogate the motion of an optomechanical accelerometer through the use of an electro-optic frequency comb. However, we note that this approach is readily amenable to both self-heterodyne and dual comb spectrometers for molecular spectroscopy as well as photonic readout where the approach's agility, speed, and simplicity are expected to enable future improvements and applications. △ Less

Submitted 12 July, 2023; originally announced July 2023.

High accuracy, high dynamic range optomechanical accelerometry enabled by dual comb spectroscopy

Authors: D. A. Long, J. R. Stroud, B. J. Reschovsky, Y. Bao, F. Zhou, S. M. Bresler, T. W. LeBrun, D. F. Plusquellic, J. J. Gorman

Abstract: Cavity optomechanical sensors can offer exceptional sensitivity; however, interrogating the cavity motion with high accuracy and dynamic range has proven to be challenging. Here we employ a dual optical frequency comb spectrometer to readout a microfabricated cavity optomechanical accelerometer, allowing for rapid simultaneous measurements of the cavity's displacement, finesse, and coupling at acc… ▽ More Cavity optomechanical sensors can offer exceptional sensitivity; however, interrogating the cavity motion with high accuracy and dynamic range has proven to be challenging. Here we employ a dual optical frequency comb spectrometer to readout a microfabricated cavity optomechanical accelerometer, allowing for rapid simultaneous measurements of the cavity's displacement, finesse, and coupling at accelerations up to 24 g (236 m/s$^2$). With this approach, we have achieved a displacement sensitivity of 3 fm/Hz$^{1/2}$, a measurement rate of 100 kHz, and a dynamic range of 3.9 $\times$ 10$^5$ which is the highest we are aware of for a microfabricated cavity optomechanical sensor. In addition, comparisons of our optomechanical sensor coupled directly to a commercial reference accelerometer show agreement at the 0.5% level, a value which is limited by the reference's reported uncertainty. Further, the methods described herein are not limited to accelerometry but rather can be readily applied to nearly any optomechanical sensor where the combination of high speed, dynamic range, and sensitivity is expected to be enabling. △ Less

Submitted 10 October, 2023; v1 submitted 30 June, 2023; originally announced June 2023.

Comments: 11 pages, 5 figures

Journal ref: APL Photonics 8, 091302 (2023)

The Lobster Eye Imager for Astronomy Onboard the SATech-01 Satellite

Authors: Z. X. Ling, X. J. Sun, C. Zhang, S. L. Sun, G. Jin, S. N. Zhang, X. F. Zhang, J. B. Chang, F. S. Chen, Y. F. Chen, Z. W. Cheng, W. Fu, Y. X. Han, H. Li, J. F. Li, Y. Li, Z. D. Li, P. R. Liu, Y. H. Lv, X. H. Ma, Y. J. Tang, C. B. Wang, R. J. Xie, Y. L. Xue, A. L. Yan , et al. (101 additional authors not shown)

Abstract: The Lobster Eye Imager for Astronomy (LEIA), a pathfinder of the Wide-field X-ray Telescope of the Einstein Probe (EP) mission, was successfully launched onboard the SATech-01 satellite of the Chinese Academy of Sciences on 27 July 2022. In this paper, we introduce the design and on-ground test results of the LEIA instrument. Using state-of-the-art Micro-Pore Optics (MPO), a wide field-of-view (Fo… ▽ More The Lobster Eye Imager for Astronomy (LEIA), a pathfinder of the Wide-field X-ray Telescope of the Einstein Probe (EP) mission, was successfully launched onboard the SATech-01 satellite of the Chinese Academy of Sciences on 27 July 2022. In this paper, we introduce the design and on-ground test results of the LEIA instrument. Using state-of-the-art Micro-Pore Optics (MPO), a wide field-of-view (FoV) of 346 square degrees (18.6 degrees * 18.6 degrees) of the X-ray imager is realized. An optical assembly composed of 36 MPO chips is used to focus incident X-ray photons, and four large-format complementary metal-oxide semiconductor (CMOS) sensors, each of 6 cm * 6 cm, are used as the focal plane detectors. The instrument has an angular resolution of 4 - 8 arcmin (in FWHM) for the central focal spot of the point spread function, and an effective area of 2 - 3 cm2 at 1 keV in essentially all the directions within the field of view. The detection passband is 0.5 - 4 keV in the soft X-rays and the sensitivity is 2 - 3 * 10-11 erg s-1 cm-2 (about 1 mini-Crab) at 1,000 second observation. The total weight of LEIA is 56 kg and the power is 85 W. The satellite, with a design lifetime of 2 years, operates in a Sun-synchronous orbit of 500 km with an orbital period of 95 minutes. LEIA is paving the way for future missions by verifying in flight the technologies of both novel focusing imaging optics and CMOS sensors for X-ray observation, and by optimizing the working setups of the instrumental parameters. In addition, LEIA is able to carry out scientific observations to find new transients and to monitor known sources in the soft X-ray band, albeit limited useful observing time available. △ Less

Submitted 24 May, 2023; originally announced May 2023.

Comments: Accepted by RAA

Improving Fast Auto-Focus with Event Polarity

Authors: Yuhan Bao, Lei Sun, Yuqin Ma, Diyang Gu, Kaiwei Wang

Abstract: Fast and accurate auto-focus in adverse conditions remains an arduous task. The emergence of event cameras has opened up new possibilities for addressing the challenge. This paper presents a new high-speed and accurate event-based focusing algorithm. Specifically, the symmetrical relationship between the event polarities in focusing is investigated, and the event-based focus evaluation function is… ▽ More Fast and accurate auto-focus in adverse conditions remains an arduous task. The emergence of event cameras has opened up new possibilities for addressing the challenge. This paper presents a new high-speed and accurate event-based focusing algorithm. Specifically, the symmetrical relationship between the event polarities in focusing is investigated, and the event-based focus evaluation function is proposed based on the principles of the event cameras and the imaging model in the focusing process. Comprehensive experiments on the public event-based autofocus dataset (EAD) show the robustness of the model. Furthermore, precise focus with less than one depth of focus is achieved within 0.004 seconds on our self-built high-speed focusing platform. The dataset and code will be made publicly available. △ Less

Submitted 3 July, 2023; v1 submitted 15 March, 2023; originally announced March 2023.

Comments: 20 pages, 12 figures, 2 tables

Journal ref: Optics Express Vol. 31, Issue 15, pp. 24025-24044 (2023)

Cavity optomechanical bistability with an ultrahigh reflectivity photonic crystal membrane

Authors: Feng Zhou, Yiliang Bao, Jason J. Gorman, John Lawall

Abstract: Photonic crystal (PhC) membranes patterned with sub-wavelength periods offer a unique combination of high reflectivity, low mass, and high mechanical quality factor. We demonstrate a PhC membrane that we use as one mirror of a Fabry-Perot cavity with finesse as high as $F=35,000(500)$, corresponding to a record high PhC reflectivity of $R=0.999835(6)$. The fundamental mechanical frequency is 426 k… ▽ More Photonic crystal (PhC) membranes patterned with sub-wavelength periods offer a unique combination of high reflectivity, low mass, and high mechanical quality factor. We demonstrate a PhC membrane that we use as one mirror of a Fabry-Perot cavity with finesse as high as $F=35,000(500)$, corresponding to a record high PhC reflectivity of $R=0.999835(6)$. The fundamental mechanical frequency is 426 kHz, more than twice the optical linewidth, placing it firmly in the resolved-sideband regime. The mechanical quality factor in vacuum is $Q=1.1(1)\times 10^6$, allowing us to achieve values of the single-photon cooperativity as high as ${\cal C}_0=6.6\times10^{-3}$. We easily see optomechanical bistability as hysteresis in the cavity transmission. As the input power is raised well beyond the bistability threshold, dynamical backaction induces strong mechanical oscillation above 1~MHz, even in the presence of air damping. This platform will facilitate advances in optomechanics, precision sensing, and applications of optomechanically-induced bistability. △ Less

Submitted 18 November, 2022; originally announced November 2022.

Comments: 10 pages, 5 figures

Dipolar spin-exchange and entanglement between molecules in an optical tweezer array

Authors: Yicheng Bao, Scarlett S. Yu, Lo�c Anderegg, Eunmi Chae, Wolfgang Ketterle, Kang-Kuen Ni, John M. Doyle

Abstract: Due to their intrinsic electric dipole moments and rich internal structure, ultracold polar molecules are promising candidate qubits for quantum computing and for a wide range of quantum simulations. Their long-lived molecular rotational states form robust qubits while the long-range dipolar interaction between molecules provides quantum entanglement. Using a molecular optical tweezer array, singl… ▽ More Due to their intrinsic electric dipole moments and rich internal structure, ultracold polar molecules are promising candidate qubits for quantum computing and for a wide range of quantum simulations. Their long-lived molecular rotational states form robust qubits while the long-range dipolar interaction between molecules provides quantum entanglement. Using a molecular optical tweezer array, single molecules can be moved and separately addressed for qubit operations using optical and microwave fields, creating a scalable quantum platform. Here, we demonstrate long-range dipolar spin-exchange interactions in pairs of CaF molecules trapped in an optical tweezer array. We control the anisotropic interaction and realize the spin-$\frac{1}{2}$ quantum XY model by encoding an effective spin-$\frac{1}{2}$ system into the rotational states of the molecules. We demonstrate a two-qubit (two-molecule) gate to generate entanglement deterministically, an essential resource for all quantum information applications. Employing interleaved tweezer arrays, we demonstrate high fidelity single site molecular addressability. △ Less

Submitted 17 November, 2022; originally announced November 2022.

Sub-kHz-linewidth external-cavity laser (ECL) with Si$_{3}$N$_{4}$ resonator used as a tunable pump for a Kerr frequency comb

Authors: Pascal Maier, Yung Chen, Yilin Xu, Yiyang Bao, Matthias Blaicher, Dimitri Geskus, Ronald Dekker, Junqiu Liu, Philipp-Immanuel Dietrich, Huanfa Peng, Sebastian Randel, Wolfgang Freude, Tobias J. Kippenberg, Christian Koos

Abstract: Combining optical gain in direct-bandgap III-V materials with tunable optical feedback offered by advanced photonic integrated circuits is key to chip-scale external-cavity lasers (ECL), offering wideband tunability along with low optical linewidths. External feedback circuits can be efficiently implemented using low-loss silicon nitride (Si$_{3}$N$_{4}$) waveguides, which do not suffer from two-p… ▽ More Combining optical gain in direct-bandgap III-V materials with tunable optical feedback offered by advanced photonic integrated circuits is key to chip-scale external-cavity lasers (ECL), offering wideband tunability along with low optical linewidths. External feedback circuits can be efficiently implemented using low-loss silicon nitride (Si$_{3}$N$_{4}$) waveguides, which do not suffer from two-photon absorption and can thus handle much higher power levels than conventional silicon photonics. However, co-integrating III-V-based gain elements with tunable external feedback circuits in chip-scale modules still represents a challenge, requiring either technologically demanding heterogeneous integration techniques or costly high-precision multi-chip assembly. In this work, we demonstrate Si$_{3}$N$_{4}$-based hybrid integrated ECL that exploit 3D-printed structures such as intra-cavity photonic wire bonds and facet-attached microlenses for low-loss optical coupling with relaxed alignment tolerances, thereby overcoming the need for active alignment while maintaining the full flexibility of multi-chip integration techniques. In a proof-of-concept experiment, we demonstrate an ECL offering a 90 nm tuning range (1480 nm - 1570 nm) with on-chip output powers above 12 dBm and side-mode suppression ratios of up to 59 dB. We achieve an intrinsic linewidth of 979 Hz, which is among the lowest values reported for comparable feedback architectures. The optical loss of the intra-cavity photonic wire bond between the III-V gain element and the Si$_{3}$N$_{4}$-based tunable feedback circuit amounts to approximately (1.6 $\pm$ 0.2) dB. We use the ECL as a tunable pump laser to generate a dissipative Kerr soliton frequency comb. To the best of our knowledge, our experiments represent the first demonstration of a single-soliton Kerr comb generated with a pump that is derived from a hybrid ECL. △ Less

Submitted 10 February, 2023; v1 submitted 11 November, 2022; originally announced November 2022.

Input optics systems of the KAGRA detector during O3GK

Authors: T. Akutsu, M. Ando, K. Arai, Y. Arai, S. Araki, A. Araya, N. Aritomi, H. Asada, Y. Aso, S. Bae, Y. Bae, L. Baiotti, R. Bajpai, M. A. Barton, K. Cannon, Z. Cao, E. Capocasa, M. Chan, C. Chen, K. Chen, Y. Chen, C-I. Chiang, H. Chu, Y-K. Chu, S. Eguchi , et al. (228 additional authors not shown)

Abstract: KAGRA, the underground and cryogenic gravitational-wave detector, was operated for its solo observation from February 25th to March 10th, 2020, and its first joint observation with the GEO 600 detector from April 7th -- 21st, 2020 (O3GK). This study presents an overview of the input optics systems of the KAGRA detector, which consist of various optical systems, such as a laser source, its intensit… ▽ More KAGRA, the underground and cryogenic gravitational-wave detector, was operated for its solo observation from February 25th to March 10th, 2020, and its first joint observation with the GEO 600 detector from April 7th -- 21st, 2020 (O3GK). This study presents an overview of the input optics systems of the KAGRA detector, which consist of various optical systems, such as a laser source, its intensity and frequency stabilization systems, modulators, a Faraday isolator, mode-matching telescopes, and a high-power beam dump. These optics were successfully delivered to the KAGRA interferometer and operated stably during the observations. The laser frequency noise was observed to limit the detector sensitivity above a few kHz, whereas the laser intensity did not significantly limit the detector sensitivity. △ Less

Submitted 12 October, 2022; originally announced October 2022.

Energy Dissipation and Asymmetric Excitation in Hybrid Waveguides for Routing and Coloring

Authors: Xianguang Yang, Long Wen, Jiahao Yan, Yanjun Bao, Qin Chen, Andrea Camposeo, Dario Pisignano, Baojun Li

Abstract: The delivery of optical signals from an external light source to a nanoscale waveguide is highly important for the development of nanophotonic circuits. However, the efficient coupling of external light energy into nanophotonic components is difficult and still remains a challenge. Herein, we use an external silica nanofiber to light up an organic-inorganic hybrid nano-waveguide, namely a system c… ▽ More The delivery of optical signals from an external light source to a nanoscale waveguide is highly important for the development of nanophotonic circuits. However, the efficient coupling of external light energy into nanophotonic components is difficult and still remains a challenge. Herein, we use an external silica nanofiber to light up an organic-inorganic hybrid nano-waveguide, namely a system composed of a polymer filament doped with MoS$_{2}$ quantum dots. Nanofiber-excited nano-waveguides in a crossed geometry are found to asymmetrically couple excitation signals along two opposite directions, with different energy dissipation resulting in different colors of the light emitted by MoS$_{2}$ quantum dots and collected from the waveguide terminals. Interestingly, rainbow-like light in the hybrid waveguide is achieved by three-in-one mixing of red, green, and blue components. This hetero-dimensional system of dots-in-waveguide represents a significant advance towards all-optical routing and full-color display in integrated nanophotonic devices. △ Less

Submitted 24 September, 2022; originally announced September 2022.

Comments: 26 pages, 11 Figures, Journal of Physical Chemistry Letters, 2021

Observation of Full-Parameter Jones Matrix in Bilayer Metasurface

Authors: Yanjun Bao, Fan Nan, Jiahao Yan, Xianguang Yang, Cheng-Wei Qiu, Baojun Li

Abstract: Metasurfaces, artificial 2D structures, have been widely used for the design of various functionalities in optics. Jones matrix, a 2*2 matrix with eight parameters, provides the most complete characterization of the metasurface structures in linear optics, and the number of free parameters (i.e., degrees of freedom, DOFs) in the Jones matrix determines the limit to what functionalities we can real… ▽ More Metasurfaces, artificial 2D structures, have been widely used for the design of various functionalities in optics. Jones matrix, a 2*2 matrix with eight parameters, provides the most complete characterization of the metasurface structures in linear optics, and the number of free parameters (i.e., degrees of freedom, DOFs) in the Jones matrix determines the limit to what functionalities we can realize. Great efforts have been made to continuously expand the number of DOFs, and a maximal number of six has been achieved recently. However, the realization of 'holy grail' goal with eight DOFs (full free parameters) has been proven as a great challenge so far. Here, we show that by cascading two layer metasurfaces and utilizing the gradient descent optimization algorithm, a spatially varying Jones matrix with eight DOFs is constructed and verified numerically and experimentally in optical frequencies. Such ultimate control unlocks new opportunities to design optical functionalities that are unattainable with previously known methodologies and may find wide potential applications in optical fields. △ Less

Submitted 11 September, 2022; originally announced September 2022.

Comments: 53 paegs, 4 figures

End boundary effects on wakes dynamics of inclined circular cylinders

Authors: Kai Zhang, Yan Bao, Dai Zhou, Zhaolong Han

Abstract: We perform direct numerical simulations to characterize the three-dimensional wake dynamics of long inclined circular cylinders with inhomogeneous end boundary conditions. Three Reynolds numbers, $\Rey=100$, 200 and 300 are considered to reveal the roles of the intrinsic secondary instabilities and the extrinsic end boundary effects in shaping the three-dimensional flows. At $\Rey=100$, the end bo… ▽ More We perform direct numerical simulations to characterize the three-dimensional wake dynamics of long inclined circular cylinders with inhomogeneous end boundary conditions. Three Reynolds numbers, $\Rey=100$, 200 and 300 are considered to reveal the roles of the intrinsic secondary instabilities and the extrinsic end boundary effects in shaping the three-dimensional flows. At $\Rey=100$, the end boundary effects are felt over the entire cylinder span by inducing oblique vortex shedding, which is associated with stronger spanwise flow in the wake than a parallel shedding. The Strouhal number of the oblique shedding is related to that of the parallel shedding of straight cylinder by the cosine law, considering the combined inclination angle and oblique angle. At $\Rey=200$, the intrinsic secondary instability results in large-scale vortex dislocation, precluding the propagation of the end boundary effects towards further span. Nevertheless, for the inclined cases, oblique shedding is still observed within limited span from the upstream end boundary. The oblique vortices are related to the two-dimensional flow at $\Rey=200$ from the viewpoint of cosine law. Further along the span, the oblique vortices destabilizes with the formation of small-scale vortices, and the flow transitions to the typical mode A* wake. At $\Rey=300$, the highly three-dimensional flow near the end boundary creates disturbances that travel along the cylinder span, creating vortex dislocations for cases with low inclination angles. For high inclination angle, oblique vortex shedding is again observed over the cylinder span, and is not disrupted by vortex dislocations of either intrinsic or extrinsic causes. △ Less

Submitted 24 August, 2022; originally announced August 2022.

Fast optical transport of ultracold molecules over long distances

Authors: Yicheng Bao, Scarlett S. Yu, Loïc Anderegg, Sean Burchesky, Derick Gonzalez-Acevedo, Eunmi Chae, Wolfgang Ketterle, Kang-Kuen Ni, John M. Doyle

Abstract: Optically trapped laser-cooled polar molecules hold promise for new science and technology in quantum information and quantum simulation. Large numerical aperture optical access and long trap lifetimes are needed for many studies, but these requirements are challenging to achieve in a magneto-optical trap (MOT) vacuum chamber that is connected to a cryogenic buffer gas beam source, as is the case… ▽ More Optically trapped laser-cooled polar molecules hold promise for new science and technology in quantum information and quantum simulation. Large numerical aperture optical access and long trap lifetimes are needed for many studies, but these requirements are challenging to achieve in a magneto-optical trap (MOT) vacuum chamber that is connected to a cryogenic buffer gas beam source, as is the case for all molecule laser cooling experiments so far. Long distance transport of molecules greatly eases fulfilling these requirements as molecules are placed into a region separate from the MOT chamber. We realize a fast transport method for ultracold molecules based on an electronically focus-tunable lens combined with an optical lattice. The high transport speed is achieved by the 1D red-detuned optical lattice, which is generated by interference of a focus-tunable laser beam and a focus-fixed laser beam. Efficiency of 48(8)% is realized in the transport of ultracold calcium monofluoride (CaF) molecules over 46 cm distance in 50 ms, with a moderate heating from 32(2) μK to 53(4) μK. Positional stability of the molecular cloud allows for stable loading of an optical tweezer array with single molecules. △ Less

Submitted 12 May, 2022; originally announced May 2022.

Comments: 21 pages, 7 figures

3D-printed facet-attached optical elements for beam shaping in optical phased arrays

Authors: Stefan Singer, Yilin Xu, Sebastian Tobias Skacel, Yiyang Bao, Heiner Zwickel, Pascal Maier, Lukas Freter, Philipp-Immanuel Dietrich, Mathias Kaschel, Christoph Menzel, Sebastian Randel, Wolfgang Freude, Christian Koos

Abstract: We demonstrate an optical phased-array (OPA) equipped with a 3D-printed facet-attached element for shaping and deflection of the emitted beam. The beam shaper combines freeform refractive surfaces with total-internal-reflection (TIR) mirrors and is in-situ printed to edge-emitting waveguide facets using high-resolution multi-photon lithography, thereby ensuring precise alignment with respect to on… ▽ More We demonstrate an optical phased-array (OPA) equipped with a 3D-printed facet-attached element for shaping and deflection of the emitted beam. The beam shaper combines freeform refractive surfaces with total-internal-reflection (TIR) mirrors and is in-situ printed to edge-emitting waveguide facets using high-resolution multi-photon lithography, thereby ensuring precise alignment with respect to on-chip waveguide structures. In a proof-of-concept experiment, we achieve a grating-lobe free steering range of $\pm 30°$ and a full-width-halfmaximum (FWHM) beam divergence of approximately $2°$. The concept opens an attractive alternative to currently used grating structures and is applicable to a wide range of integration platforms. △ Less

Submitted 9 January, 2023; v1 submitted 24 March, 2022; originally announced March 2022.

Unexpected advantages of exploitation for target searches in complex networks

Authors: Youngkyoung Bae, Gangmin Son, Hawoong Jeong

Abstract: Exploitation universally emerges in various decision-making contexts, e.g., animals foraging, web surfing, the evolution of scientists' research topics, and our daily lives. Despite its ubiquity, exploitation, which refers to the behavior of revisiting previous experiences, has often been considered to delay the search process of finding a target. In this paper, we investigate how exploitation aff… ▽ More Exploitation universally emerges in various decision-making contexts, e.g., animals foraging, web surfing, the evolution of scientists' research topics, and our daily lives. Despite its ubiquity, exploitation, which refers to the behavior of revisiting previous experiences, has often been considered to delay the search process of finding a target. In this paper, we investigate how exploitation affects search performance by applying a non-Markovian random walk model, where a walker randomly revisits a previously visited node using long-term memory. We analytically study two broad forms of network structures, namely (i) clique-like networks and (ii) lollipop-like networks, and find that exploitation can significantly improve search performance in lollipop-like networks whereas it hinders target search in clique-like networks. Moreover, we numerically verify that exploitation can reduce the time needed to fully explore the underlying networks by using $550$ diverse real-world networks. Based on the analytic result, we define the lollipop-likeness of a network and observe a positive relationship between the advantage of exploitation and lollipop-likeness. △ Less

Submitted 11 August, 2022; v1 submitted 23 February, 2022; originally announced February 2022.

Comments: 12 pages, 7 figures

Journal ref: Chaos 32, 083118 (2022)

Harnessing the Quantum Behavior of Spins on Surfaces

Authors: Yi Chen, Yujeong Bae, Andreas J. Heinrich

Abstract: The desire to control and measure individual quantum systems such as atoms and ions in a vacuum has led to significant scientific and engineering developments in the past decades that form the basis of today's quantum information science. Single atoms and molecules on surfaces, on the other hand, are heavily investigated by physicists, chemists, and material scientists in search of novel electroni… ▽ More The desire to control and measure individual quantum systems such as atoms and ions in a vacuum has led to significant scientific and engineering developments in the past decades that form the basis of today's quantum information science. Single atoms and molecules on surfaces, on the other hand, are heavily investigated by physicists, chemists, and material scientists in search of novel electronic and magnetic functionalities. These two paths crossed in 2015 when it was first clearly demonstrated that individual spins on a surface can be coherently controlled and read out in an all-electrical fashion. The enabling technique is a combination of scanning tunneling microscopy (STM) and electron spin resonance (ESR), which offers unprecedented coherent controllability at the Angstrom length scale. This review aims to illustrate the essential ingredients that allow the quantum operations of single spins on surfaces. Three domains of applications of surface spins, namely quantum sensing, quantum control, and quantum simulation, are discussed with physical principles explained and examples presented. Enabled by the atomically-precise fabrication capability of STM, single spins on surfaces might one day lead to the realization of quantum nanodevices and artificial quantum materials at the atomic scale. △ Less

Submitted 29 December, 2021; originally announced December 2021.

Comments: Advanced Materials, in press

Journal ref: Advanced Materials 2107534 (2022)

Breaking the Rate-Loss Bound of Quantum Key Distribution with Asynchronous Two-Photon Interference

Authors: Yuan-Mei Xie, Yu-Shuo Lu, Chen-Xun Weng, Xiao-Yu Cao, Zhao-Ying Jia, Yu Bao, Yang Wang, Yao Fu, Hua-Lei Yin, Zeng-Bing Chen

Abstract: Twin-field quantum key distribution can overcome the secret key capacity of repeaterless quantum key distribution via single-photon interference. However, to compensate for the channel fluctuations and lock the laser fluctuations, the techniques of phase tracking and phase locking are indispensable in experiment, which drastically increase experimental complexity and hinder free-space realization.… ▽ More Twin-field quantum key distribution can overcome the secret key capacity of repeaterless quantum key distribution via single-photon interference. However, to compensate for the channel fluctuations and lock the laser fluctuations, the techniques of phase tracking and phase locking are indispensable in experiment, which drastically increase experimental complexity and hinder free-space realization. Inspired by the duality in entanglement, we herein present an asynchronous measurement-device-independent quantum key distribution protocol that can surpass the secret key capacity even without phase tracking and phase locking. Leveraging the concept of time multiplexing, asynchronous two-photon Bell-state measurement is realized by postmatching two interference detection events. For a 1 GHz system, the new protocol reaches a transmission distance of 450 km without phase tracking. After further removing phase locking, our protocol is still capable of breaking the capacity at 270 km. Intriguingly, when using the same experimental techniques, our protocol has a higher key rate than the phase-matching-type twin-field protocol. In the presence of imperfect intensity modulation, it also has a significant advantage in terms of the transmission distance over the sending-or-not-sending type twin-field protocol. With high key rates and accessible technology, our work provides a promising candidate for practical scalable quantum communication networks. △ Less

Submitted 26 April, 2022; v1 submitted 21 December, 2021; originally announced December 2021.

Comments: 15 pages, 10 figures. arXiv admin note: text overlap with arXiv:2112.11165

Journal ref: PRX Quantum 3, 020315 (2022)

Intrinsically accurate sensing with an optomechanical accelerometer

Authors: Benjamin J. Reschovsky, David A. Long, Feng Zhou, Yiliang Bao, Richard A. Allen, Thomas W. LeBrun, Jason J. Gorman

Abstract: We demonstrate a microfabricated optomechanical accelerometer that is capable of percent-level accuracy without external calibration. To achieve this capability, we use a mechanical model of the device behavior that can be characterized by the thermal noise response along with an optical frequency comb readout method that enables high sensitivity, high bandwidth, high dynamic range, and SI-traceab… ▽ More We demonstrate a microfabricated optomechanical accelerometer that is capable of percent-level accuracy without external calibration. To achieve this capability, we use a mechanical model of the device behavior that can be characterized by the thermal noise response along with an optical frequency comb readout method that enables high sensitivity, high bandwidth, high dynamic range, and SI-traceable displacement measurements. The resulting intrinsic accuracy was evaluated over a wide frequency range by comparing to a primary vibration calibration system and local gravity. The average agreement was found to be 2.1 % for the calibration system between 0.1 kHz and 15 kHz and better than 0.2 % for the static acceleration. This capability has the potential to replace costly external calibrations and improve the accuracy of inertial guidance systems and remotely deployed accelerometers. Due to the fundamental nature of the intrinsic accuracy approach, it could be extended to other optomechanical transducers, including force and pressure sensors. △ Less

Submitted 23 May, 2022; v1 submitted 10 December, 2021; originally announced December 2021.

Comments: 13 pages, 7 figures

Journal ref: Opt. Express 30, 19510-19523 (2022)

A flexible film thermocouple temperature sensor

Authors: Yulong Bao, Bin Xu, Huang Wang, Dandan Yuan, Xiaoxiao Yan, Haoxin Shu, Gang Tang

Abstract: This article introduces a thin-film thermocouple temperature sensor with symmetrical electrode structure. It uses PI film as a flexible substrate. Cu film and CuNi film made by MEMS manufacturing process as positive and negative electrodes. The device itself has the advantages of miniature, bendable and fast response speed. To reduce the film resistance value. Conducting metal film thickness and s… ▽ More This article introduces a thin-film thermocouple temperature sensor with symmetrical electrode structure. It uses PI film as a flexible substrate. Cu film and CuNi film made by MEMS manufacturing process as positive and negative electrodes. The device itself has the advantages of miniature, bendable and fast response speed. To reduce the film resistance value. Conducting metal film thickness and sputtering substrate temperature optimization experiments. The critical dimensions of Cu/CuNi film are 650nm and 400nm. The best sputtering substrate temperature for Cu/CuNi films is 100 degrees Celsius and 150 degrees Celsius. Testing the adhesion of thin film thermocouples using the peel-off method. The test result is 9.4N. Finally, the film thermocouple temperature sensor is subjected to a temperature static calibration experiment. The result shows that the actual potential difference error is within 1 degrees Celsius. It belongs to the second class standard in the formulation of thermocouple standards in my country. Through curve fitting, the corresponding relationship between temperature and potential difference is more accurate. △ Less

Submitted 6 November, 2021; originally announced November 2021.

A capacitive flexible tactile sensor

Authors: Dandan Yuan, Haoxin Shu, Yulong Bao, Bin Xu, Huan Wang

Abstract: In this paper, a capacitive flexible tactile sensor was designed to measure the pressure of objects based on MEMS technology. This sensor is a structure of a 4x4 array, with metal Ag as the capacitive electrode, which forms the tactile sensing unit of the sensor. The structure of capacitive flexible tactile sensor was designed and an experimental platform was established to test the performance. T… ▽ More In this paper, a capacitive flexible tactile sensor was designed to measure the pressure of objects based on MEMS technology. This sensor is a structure of a 4x4 array, with metal Ag as the capacitive electrode, which forms the tactile sensing unit of the sensor. The structure of capacitive flexible tactile sensor was designed and an experimental platform was established to test the performance. The tests show that when the thickness of the intermediate layer is 2 mm and the density is medium, the sensor's sensitivity is the best while the time of both the response and the rebound is fast. △ Less

Submitted 31 October, 2021; originally announced November 2021.

Magnetic and magnetocaloric properties of melt-extracted Mn1.26Fe0.60P0.48Si0.52 microwires

Authors: Lin Luo, Hongxian Shen, Sida Jiang, Ying Bao, Yongjiang Huang, Shu Guo, Ze Li, Nguyen Thi My Duc, Jianfei Sun, Manh-Huong Phan

Abstract: The polycrystalline Mn1.26Fe0.60P0.48Si0.52 microwires were successfully fabricated for the first time by the melt-extraction technique, and their magnetic and magnetocaloric properties were investigated systematically. The structural analysis shows that the microwires possess a hexagonal phase with Fe2P type, with a homogeneous composition distribution. Magnetometry measurements show that the mic… ▽ More The polycrystalline Mn1.26Fe0.60P0.48Si0.52 microwires were successfully fabricated for the first time by the melt-extraction technique, and their magnetic and magnetocaloric properties were investigated systematically. The structural analysis shows that the microwires possess a hexagonal phase with Fe2P type, with a homogeneous composition distribution. Magnetometry measurements show that the microwires undergo a weak first-order magnetic phase transition at a temperature of 142 K. The maximum magnetic entropy change of the microwires reaches 4.64 Jkg-1K-1 for a field change of 5 T. These low-cost Mn1.26Fe0.60P0.48Si0.52 microwires are promising for active magnetic refrigeration in the liquid nitrogen temperature range. △ Less

Submitted 26 September, 2021; originally announced September 2021.

Attaining entropy production and dissipation maps from Brownian movies via neural networks

Authors: Youngkyoung Bae, Dong-Kyum Kim, Hawoong Jeong

Abstract: Quantifying entropy production (EP) is essential to understand stochastic systems at mesoscopic scales, such as living organisms or biological assemblies. However, without tracking the relevant variables, it is challenging to figure out where and to what extent EP occurs from recorded time-series image data from experiments. Here, applying a convolutional neural network (CNN), a powerful tool for… ▽ More Quantifying entropy production (EP) is essential to understand stochastic systems at mesoscopic scales, such as living organisms or biological assemblies. However, without tracking the relevant variables, it is challenging to figure out where and to what extent EP occurs from recorded time-series image data from experiments. Here, applying a convolutional neural network (CNN), a powerful tool for image processing, we develop an estimation method for EP through an unsupervised learning algorithm that calculates only from movies. Together with an attention map of the CNN's last layer, our method can not only quantify stochastic EP but also produce the spatiotemporal pattern of the EP (dissipation map). We show that our method accurately measures the EP and creates a dissipation map in two nonequilibrium systems, the bead-spring model and a network of elastic filaments. We further confirm high performance even with noisy, low spatial resolution data, and partially observed situations. Our method will provide a practical way to obtain dissipation maps and ultimately contribute to uncovering the nonequilibrium nature of complex systems. △ Less

Submitted 29 June, 2021; originally announced June 2021.

Comments: 15 pages, 8 figures

Journal ref: Phys. Rev. Research 4, 033094 (2022)

Rotational Coherence Times of Polar Molecules in Optical Tweezers

Authors: Sean Burchesky, Loic Anderegg, Yicheng Bao, Scarlett S. Yu, Eunmi Chae, Wolfgang Ketterle, Kang-Kuen Ni, John M. Doyle

Abstract: Qubit coherence times are critical to the performance of any robust quantum computing platform. For quantum information processing using arrays of polar molecules, a key performance parameter is the molecular rotational coherence time. We report a 93(7) ms coherence time for rotational state qubits of laser cooled CaF molecules in optical tweezer traps, over an order of magnitude longer than previ… ▽ More Qubit coherence times are critical to the performance of any robust quantum computing platform. For quantum information processing using arrays of polar molecules, a key performance parameter is the molecular rotational coherence time. We report a 93(7) ms coherence time for rotational state qubits of laser cooled CaF molecules in optical tweezer traps, over an order of magnitude longer than previous systems. Inhomogeneous broadening due to the differential polarizability between the qubit states is suppressed by tuning the tweezer polarization and applied magnetic field to a "magic" angle. The coherence time is limited by the residual differential polarizability, implying improvement with further cooling. A single spin-echo pulse is able to extend the coherence time to nearly half a second. The measured coherence times demonstrate the potential of polar molecules as high fidelity qubits. △ Less

Submitted 31 May, 2021; originally announced May 2021.

Journal ref: Phys. Rev. Lett. 127, 123202 (2021)

Dielectric metasurface for independent complex-amplitude control of arbitrary two orthogonal states of polarization

Authors: Yanjun Bao, Ying Yu, Shang Sun, Yang Chen, Qing-Hua Xu, Cheng-Wei Qiu

Abstract: Metasurfaces are planar structures that can manipulate the amplitude, phase and polarization (APP) of light at subwavelength scale. Although various functionalities have been proposed based on metasurface, a most general optical control, i.e., independent complex-amplitude (amplitude and phase) control of arbitrary two orthogonal states of polarizations, has not yet been realized. Such level of op… ▽ More Metasurfaces are planar structures that can manipulate the amplitude, phase and polarization (APP) of light at subwavelength scale. Although various functionalities have been proposed based on metasurface, a most general optical control, i.e., independent complex-amplitude (amplitude and phase) control of arbitrary two orthogonal states of polarizations, has not yet been realized. Such level of optical control can not only cover the various functionalities realized previously, but also enable new functionalities that are not feasible before. Here, we propose a single-layer dielectric metasurface to realize this goal and experimentally demonstrate several advanced functionalities, such as two independent full-color printing images under arbitrary elliptically orthogonal polarizations and dual sets of printing-hologram integrations. Our work opens the way for a wide range of applications in advanced image display, information encoding, and polarization optics. △ Less

Submitted 28 May, 2021; originally announced May 2021.

Comments: 23 pages, 4 figures

A low-communication-overhead parallel method for the 3D incompressible Navier-Stokes equations

Authors: Jiabin Xie, Jianchao He, Yun Bao, Xi Chen

Abstract: This paper presents a low-communication-overhead parallel method for solving the 3D incompressible Navier-Stokes equations. A fully-explicit projection method with second-order space-time accuracy is adopted. Combined with fast Fourier transforms, the parallel diagonal dominant (PDD) algorithm for the tridiagonal system is employed to solve the pressure Poisson equation, differing from its recent… ▽ More This paper presents a low-communication-overhead parallel method for solving the 3D incompressible Navier-Stokes equations. A fully-explicit projection method with second-order space-time accuracy is adopted. Combined with fast Fourier transforms, the parallel diagonal dominant (PDD) algorithm for the tridiagonal system is employed to solve the pressure Poisson equation, differing from its recent applications to compact scheme derivatives computation (Abide et al. 2017) and alternating-direction-implicit method (Moon et al. 2020). The number of all-to-all communications is decreased to only two, in a 2D pencil-like domain decomposition. The resulting MPI/OpenMP hybrid parallel code shows excellent strong scalability up to $10^4$ cores and small wall-clock time per timestep. Numerical simulations of turbulent channel flow at different friction Reynolds numbers ($Re_τ$ = 550, 1000, 2000) have been conducted and the statistics are in good agreement with the reference data. The proposed method allows massively simulation of wall turbulence at high Reynolds numbers as well as many other incompressible flows. △ Less

Submitted 20 April, 2021; v1 submitted 18 April, 2021; originally announced April 2021.

Target-Dependent Chemical Species Tomography with Hybrid Meshing of Sensing Regions

Authors: Rui Zhang, Jingjing Si, Godwin Enemali, Yong Bao, Chang Liu

Abstract: This paper develops a hybrid-size meshing scheme for target-dependent imaging in Chemical Species Tomography (CST). The traditional implementation of CST generally places the target field in the central region of laser sensing, the so-called Region of Interest (RoI), with uniform-size meshes. The centre of the RoI locates at the midpoint between the laser emitters and receivers, while the size of… ▽ More This paper develops a hybrid-size meshing scheme for target-dependent imaging in Chemical Species Tomography (CST). The traditional implementation of CST generally places the target field in the central region of laser sensing, the so-called Region of Interest (RoI), with uniform-size meshes. The centre of the RoI locates at the midpoint between the laser emitters and receivers, while the size of the RoI is empirically determined by the optical layout. A too small RoI cannot make the most use of laser beams, while a too large one leads to much severer rank deficiency in CST. To solve the above-mentioned issues, we introduce hybrid-size meshing, for the first time, by reforming the density of the pixels in the entire sensing region of CST. This development alleviates the ill-posedness of the CST inverse problem by detailing the target flow field with dense pixels in the RoI and fully considering the complete physical absorption model with sparse pixels out of the RoI. The proposed scheme was both numerically and experimentally validated using a CST sensor with 32 laser beams using a variety of computational tomographic algorithms. The images reconstructed using the hybrid-size meshing scheme show better accuracy and finer profile of the target flow, compared with those reconstructed using the traditionally uniform-size meshing. The proposed hybrid-size meshing scheme significantly facilitates the industrial application of CST towards practical combustors, in which the combustion zone is bypassed by cooling air. In these scenarios, the proposed scheme can better characterise the combustion zone with dense meshes, while maintaining the integrity of the physical model by considering the absorption in the bypass air with sparse meshes. △ Less

Submitted 27 May, 2021; v1 submitted 10 February, 2021; originally announced February 2021.

Comments: Submitted to IEEE Transactions on Instrumentation and Measurement

Observation of Microwave Shielding of Ultracold Molecules

Authors: Lo�c Anderegg, Sean Burchesky, Yicheng Bao, Scarlett S. Yu, Tijs Karman, Eunmi Chae, Kang-Kuen Ni, Wolfgang Ketterle, John M. Doyle

Abstract: Harnessing the potential wide-ranging quantum science applications of molecules will require control of their interactions. Here, we use microwave radiation to directly engineer and tune the interaction potentials between ultracold calcium monofluoride (CaF) molecules. By merging two optical tweezers, each containing a single molecule, we probe collisions in three dimensions. The correct combinati… ▽ More Harnessing the potential wide-ranging quantum science applications of molecules will require control of their interactions. Here, we use microwave radiation to directly engineer and tune the interaction potentials between ultracold calcium monofluoride (CaF) molecules. By merging two optical tweezers, each containing a single molecule, we probe collisions in three dimensions. The correct combination of microwave frequency and power creates an effective repulsive shield, which suppresses the inelastic loss rate by a factor of six, in agreement with theoretical calculations. The demonstrated microwave shielding shows a general route to the creation of long-lived, dense samples of ultracold molecules and evaporative cooling. △ Less

Submitted 8 February, 2021; originally announced February 2021.

Back-n White Neutron Source at CSNS and its Applications

Authors: The CSNS Back-n Collaboration, :, Jing-Yu Tang, Qi An, Jiang-Bo Bai, Jie Bao, Yu Bao, Ping Cao, Hao-Lei Chen, Qi-Ping Chen, Yong-Hao Chen, Zhen Chen, Zeng-Qi Cui, Rui-Rui Fan, Chang-Qing Feng, Ke-Qing Gao, Xiao-Long Gao, Min-Hao Gu, Chang-Cai Han, Zi-Jie Han, Guo-Zhu He, Yong-Cheng He, Yang Hong, Yi-Wei Hu, Han-Xiong Huang , et al. (52 additional authors not shown)

Abstract: Back-streaming neutrons from the spallation target of the China Spallation Neutron Source (CSNS) that emit through the incoming proton channel were exploited to build a white neutron beam facility (the so-called Back-n white neutron source), which was completed in March 2018. The Back-n neutron beam is very intense, at approximately 2*10^7 n/cm^2/s at 55 m from the target, and has a nominal proton… ▽ More Back-streaming neutrons from the spallation target of the China Spallation Neutron Source (CSNS) that emit through the incoming proton channel were exploited to build a white neutron beam facility (the so-called Back-n white neutron source), which was completed in March 2018. The Back-n neutron beam is very intense, at approximately 2*10^7 n/cm^2/s at 55 m from the target, and has a nominal proton beam with a power of 100 kW in the CSNS-I phase and a kinetic energy of 1.6 GeV and a thick tungsten target in multiple slices with modest moderation from the cooling water through the slices. In addition, the excellent energy spectrum spanning from 0.5 eV to 200 MeV, and a good time resolution related to the time-of-flight measurements make it a typical white neutron source for nuclear data measurements; its overall performance is among that of the best white neutron sources in the world. Equipped with advanced spectrometers, detectors, and application utilities, the Back-n facility can serve wide applications, with a focus on neutron-induced cross-section measurements. This article presents an overview of the neutron beam characteristics, the experimental setups, and the ongoing applications at Back-n. △ Less

Submitted 16 January, 2021; originally announced January 2021.

Comments: 11 pages, 9 figures

Turbulence suppression by streamwise-varying wall rotation in pipe flow

Authors: Xu Liu, Hongbo Zhu, Yan Bao, Dai Zhou, Zhaolong Han

Abstract: Direct numerical simulations (DNSs) of turbulent pipe flow subjected to streamwise-varying wall rotation are performed. This control method is able to achieve drag reduction and even relaminarize the flow under certain control parameters at low Reynolds number. Two control parameters, which are velocity amplitude and wavelength, are considered. An annular boundary layer, called Spatial Stokes Laye… ▽ More Direct numerical simulations (DNSs) of turbulent pipe flow subjected to streamwise-varying wall rotation are performed. This control method is able to achieve drag reduction and even relaminarize the flow under certain control parameters at low Reynolds number. Two control parameters, which are velocity amplitude and wavelength, are considered. An annular boundary layer, called Spatial Stokes Layer (SSL), is formed by the wall rotation. Based on the thickness of SSL, two types of drag reduction scenarios are identified. When the thickness is low, the SSL acts as a spacer layer, obstructing the impact of fluids against the wall and hence reducing the shear stress. The flow structures in the outer layer are less affected and are stretched in streamwise direction due to the increased velocity gradient. Within the SSL, the turbulence intensity diminishes dramatically. When the thickness is large, a streamwise wavy pattern of near-wall low-speed streaks is formed. The orientation of streaks is found to lag behind the direction of local mean velocity in phase and conform to the direction of local resultant shear stress. The streamwise scale of near-wall flow structures is significantly reduced, resulting in the disruption of downstream development of flow structures and hence leading to the drag reduction. Besides, it is found that it requires both large enough thickness of SSL and velocity amplitude to relaminarize the turbulence. The relaminarization mechanism is that the annular SSL can continuously absorb energy from wall-normal stress due to the rotation effect, thereby the turbulence self-sustaining process could not be maintained. For the relaminarization cases, the laminar state is stable to even extremely large perturbations, which possibly makes laminar state the only fixed point for the whole system. △ Less

Submitted 29 January, 2022; v1 submitted 6 January, 2021; originally announced January 2021.

Construction and On-site Performance of the LHAASO WFCTA Camera

Authors: F. Aharonian, Q. An, Axikegu, L. X. Bai, Y. X. Bai, Y. W. Bao, D. Bastieri, X. J. Bi, Y. J. Bi, H. Cai, J. T. Cai, Z. Cao, Z. Cao, J. Chang, J. F. Chang, X. C. Chang, B. M. Chen, J. Chen, L. Chen, L. Chen, L. Chen, M. J. Chen, M. L. Chen, Q. H. Chen, S. H. Chen , et al. (234 additional authors not shown)

Abstract: The focal plane camera is the core component of the Wide Field-of-view Cherenkov/fluorescence Telescope Array (WFCTA) of the Large High-Altitude Air Shower Observatory (LHAASO). Because of the capability of working under moonlight without aging, silicon photomultipliers (SiPM) have been proven to be not only an alternative but also an improvement to conventional photomultiplier tubes (PMT) in this… ▽ More The focal plane camera is the core component of the Wide Field-of-view Cherenkov/fluorescence Telescope Array (WFCTA) of the Large High-Altitude Air Shower Observatory (LHAASO). Because of the capability of working under moonlight without aging, silicon photomultipliers (SiPM) have been proven to be not only an alternative but also an improvement to conventional photomultiplier tubes (PMT) in this application. Eighteen SiPM-based cameras with square light funnels have been built for WFCTA. The telescopes have collected more than 100 million cosmic ray events and preliminary results indicate that these cameras are capable of working under moonlight. The characteristics of the light funnels and SiPMs pose challenges (e.g. dynamic range, dark count rate, assembly techniques). In this paper, we present the design features, manufacturing techniques and performances of these cameras. Finally, the test facilities, the test methods and results of SiPMs in the cameras are reported here. △ Less

Submitted 4 July, 2021; v1 submitted 29 December, 2020; originally announced December 2020.

Comments: 45 pages, 21 figures, article

Journal ref: Eur. Phys. J. C 81, 657 (2021)

Analytical phase optical transfer function for Gaussian illumination and the optimized profiles

Authors: Jianhui Huang, Yijun Bao, Thomas K. Gaylord

Abstract: The imaging performance of tomographic deconvolution phase microscopy can be described in terms of the phase optical transfer function (POTF) which, in turn, depends on the illumination profile. To facilitate the optimization of the illumination profile, an analytical calculation method based on polynomial fitting is developed to describe the POTF for general non-uniform axially-symmetric illumina… ▽ More The imaging performance of tomographic deconvolution phase microscopy can be described in terms of the phase optical transfer function (POTF) which, in turn, depends on the illumination profile. To facilitate the optimization of the illumination profile, an analytical calculation method based on polynomial fitting is developed to describe the POTF for general non-uniform axially-symmetric illumination. This is then applied to Gaussian and related profiles. Compared to numerical integration methods that integrate over a series of annuli, the present analytical method is much faster and is equally accurate. Further, a balanced distribution criterion for the POTF and a least-squares minimization are presented to optimize the uniformity of the POTF. An optimum general profile is found analytically by relaxed optimal search and an optimum Gaussian profile is found through a tree search. Numerical simulations confirm the performance of these optimum profiles and support the balanced distribution criterion introduced. △ Less

Submitted 10 December, 2020; originally announced December 2020.

Comments: 6 figures

Electro-optic frequency combs for rapid interrogation in cavity optomechanics

Authors: D. A. Long, B. J. Reschovsky, F. Zhou, Y. Bao, T. W. LeBrun, J. J. Gorman

Abstract: Electro-optic frequency combs were employed to rapidly interrogate an optomechanical sensor, demonstrating spectral resolution substantially exceeding that possible with a mode-locked frequency comb. Frequency combs were generated using an integrated-circuit-based direct digital synthesizer and utilized in a self-heterodyne configuration. Unlike approaches based upon laser locking or sweeping, the… ▽ More Electro-optic frequency combs were employed to rapidly interrogate an optomechanical sensor, demonstrating spectral resolution substantially exceeding that possible with a mode-locked frequency comb. Frequency combs were generated using an integrated-circuit-based direct digital synthesizer and utilized in a self-heterodyne configuration. Unlike approaches based upon laser locking or sweeping, the present approach allows rapid, parallel measurements of full optical cavity modes, large dynamic range of sensor displacement, and acquisition across a wide frequency range between DC and 500 kHz. In addition to being well suited to measurements of cavity optomechanical sensors, this optical frequency comb-based approach can be utilized for interrogation in a wide range of physical and chemical sensors. △ Less

Submitted 31 March, 2022; v1 submitted 14 August, 2020; originally announced August 2020.

Comments: 5 pages, 6 figures

Broadband Optomechanical Sensing at the Thermodynamic Limit

Authors: Feng Zhou, Yiliang Bao, Ramgopal Madugani, David A. Long, Jason J. Gorman, Thomas W. LeBrun

Abstract: Cavity optomechanics has opened new avenues of research in both fundamental physics and precision measurement by significantly advancing the sensitivity achievable in detecting attonewton forces, nanoparticles, magnetic fields, and gravitational waves. A fundamental limit to sensitivity for these measurements is energy exchange with the environment as described by the fluctuation-dissipation theor… ▽ More Cavity optomechanics has opened new avenues of research in both fundamental physics and precision measurement by significantly advancing the sensitivity achievable in detecting attonewton forces, nanoparticles, magnetic fields, and gravitational waves. A fundamental limit to sensitivity for these measurements is energy exchange with the environment as described by the fluctuation-dissipation theorem. While the limiting sensitivity can be increased by increasing the mass or reducing the damping of the mechanical sensing element, these design tradeoffs lead to larger detectors or limit the range of mechanical frequencies that can be measured, excluding the bandwidth requirements for many real-world applications. We report on a microfabricated optomechanical sensing platform based on a Fabry-Perot microcavity and show that when operating as an accelerometer it can achieve nearly ideal broadband performance at the thermodynamic limit (Brownian motion of the proof mass) with the highest sensitivity reported to date over a wide frequency range ($314\,nm \cdot s^{-2}/\sqrt{Hz}$ over 6.8 kHz). This approach is applicable to a range of measurements from pressure and force sensing to seismology and gravimetry, including searches for new physics such as non-Newtonian gravity or dark matter. △ Less

Submitted 30 July, 2020; originally announced August 2020.

Relative Entropy Regularised TDLAS Tomography for Robust Temperature Imaging

Authors: Yong Bao, Rui Zhang, Godwin Enemali, Zhang Cao, Bin Zhou, Hugh McCann, Chang Liu

Abstract: Tunable Diode Laser Absorption Spectroscopy (TDLAS) tomography has been widely used for in situ combustion diagnostics, yielding images of both species concentration and temperature. The temperature image is generally obtained from the reconstructed absorbance distributions for two spectral transitions, i.e. two-line thermometry. However, the inherently ill-posed nature of tomographic data inversi… ▽ More Tunable Diode Laser Absorption Spectroscopy (TDLAS) tomography has been widely used for in situ combustion diagnostics, yielding images of both species concentration and temperature. The temperature image is generally obtained from the reconstructed absorbance distributions for two spectral transitions, i.e. two-line thermometry. However, the inherently ill-posed nature of tomographic data inversion leads to noise in each of the reconstructed absorbance distributions. These noise effects propagate into the absorbance ratio and generate artefacts in the retrieved temperature image. To address this problem, we have developed a novel algorithm, which we call Relative Entropy Tomographic RecOnstruction (RETRO), for TDLAS tomography. A relative entropy regularisation is introduced for high-fidelity temperature image retrieval from jointly reconstructed two-line absorbance distributions. We have carried out numerical simulations and proof-of-concept experiments to validate the proposed algorithm. Compared with the well-established Simultaneous Algebraic Reconstruction Technique (SART), the RETRO algorithm significantly improves the quality of the tomographic temperature images, exhibiting excellent robustness against TDLAS tomographic measurement noise. RETRO offers great potential for industrial field applications of TDLAS tomography, where it is common for measurements to be performed in very harsh environments. △ Less

Submitted 13 July, 2020; originally announced July 2020.

Comments: Preprint submitted to IEEE Transactions on Instrumentation and Measurement

Overview of KAGRA: Detector design and construction history

Authors: T. Akutsu, M. Ando, K. Arai, Y. Arai, S. Araki, A. Araya, N. Aritomi, Y. Aso, S. -W. Bae, Y. -B. Bae, L. Baiotti, R. Bajpai, M. A. Barton, K. Cannon, E. Capocasa, M. -L. Chan, C. -S. Chen, K. -H. Chen, Y. -R. Chen, H. -Y. Chu, Y-K. Chu, S. Eguchi, Y. Enomoto, R. Flaminio, Y. Fujii , et al. (175 additional authors not shown)

Abstract: KAGRA is a newly built gravitational-wave telescope, a laser interferometer comprising arms with a length of 3\,km, located in Kamioka, Gifu, Japan. KAGRA was constructed under the ground and it is operated using cryogenic mirrors that help in reducing the seismic and thermal noise. Both technologies are expected to provide directions for the future of gravitational-wave telescopes. In 2019, KAGRA… ▽ More KAGRA is a newly built gravitational-wave telescope, a laser interferometer comprising arms with a length of 3\,km, located in Kamioka, Gifu, Japan. KAGRA was constructed under the ground and it is operated using cryogenic mirrors that help in reducing the seismic and thermal noise. Both technologies are expected to provide directions for the future of gravitational-wave telescopes. In 2019, KAGRA finished all installations with the designed configuration, which we call the baseline KAGRA. In this occasion, we present an overview of the baseline KAGRA from various viewpoints in a series of of articles. In this article, we introduce the design configurations of KAGRA with its historical background. △ Less

Submitted 2 July, 2020; v1 submitted 12 May, 2020; originally announced May 2020.

Comments: 33 pages, 10 figures

Observation of Collisions between Two Ultracold Ground-State CaF Molecules

Authors: Lawrence W. Cheuk, Loïc Anderegg, Yicheng Bao, Sean Burchesky, Scarlett Yu, Wolfgang Ketterle, Kang-Kuen Ni, John M. Doyle

Abstract: We measure inelastic collisions between ultracold CaF molecules by combining two optical tweezers, each containing a single molecule. We observe collisions between $^2Σ$ CaF molecules in the absolute ground state $|X,v=0, N=0,F=0\rangle$, and in excited hyperfine and rotational states. In the absolute ground state, we find a two-body loss rate of $7(4) \times 10^{-11} \text{cm}^{3}/\text{s}$, whic… ▽ More We measure inelastic collisions between ultracold CaF molecules by combining two optical tweezers, each containing a single molecule. We observe collisions between $^2Σ$ CaF molecules in the absolute ground state $|X,v=0, N=0,F=0\rangle$, and in excited hyperfine and rotational states. In the absolute ground state, we find a two-body loss rate of $7(4) \times 10^{-11} \text{cm}^{3}/\text{s}$, which is below, but close to the predicted universal loss rate. △ Less

Submitted 31 January, 2020; originally announced February 2020.

Comments: 5 pages, 4 figures

Journal ref: Phys. Rev. Lett. 125, 043401 (2020)

An arm length stabilization system for KAGRA and future gravitational-wave detectors

Authors: T. Akutsu, M. Ando, K. Arai, K. Arai, Y. Arai, S. Araki, A. Araya, N. Aritomi, Y. Aso, S. Bae, Y. Bae, L. Baiotti, R. Bajpai, M. A. Barton, K. Cannon, E. Capocasa, M. Chan, C. Chen, K. Chen, Y. Chen, H. Chu, Y-K. Chu, K. Doi, S. Eguchi, Y. Enomoto , et al. (181 additional authors not shown)

Abstract: Modern ground-based gravitational wave (GW) detectors require a complex interferometer configuration with multiple coupled optical cavities. Since achieving the resonances of the arm cavities is the most challenging among the lock acquisition processes, the scheme called arm length stabilization (ALS) had been employed for lock acquisition of the arm cavities. We designed a new type of the ALS, wh… ▽ More Modern ground-based gravitational wave (GW) detectors require a complex interferometer configuration with multiple coupled optical cavities. Since achieving the resonances of the arm cavities is the most challenging among the lock acquisition processes, the scheme called arm length stabilization (ALS) had been employed for lock acquisition of the arm cavities. We designed a new type of the ALS, which is compatible with the interferometers having long arms like the next generation GW detectors. The features of the new ALS are that the control configuration is simpler than those of previous ones and that it is not necessary to lay optical fibers for the ALS along the kilometer-long arms of the detector. Along with simulations of its noise performance, an experimental test of the new ALS was performed utilizing a single arm cavity of KAGRA. This paper presents the first results of the test where we demonstrated that lock acquisition of the arm cavity was achieved using the new ALS and residual noise was measured to be $8.2\,\mathrm{Hz}$ in units of frequency, which is smaller than the linewidth of the arm cavity and thus low enough to lock the full interferometer of KAGRA in a repeatable and reliable manner. △ Less

Submitted 28 November, 2019; v1 submitted 2 October, 2019; originally announced October 2019.

Comments: 21 pages, 8figures

Journal ref: Class. Quantum Grav. 37 (2020) 035004