Showing 1–50 of 79 results for author: Neuffer, D

Final Cooling With Thick Wedges for a Muon Collider

Authors: D. Fu, A. Badea. K. Folan Di Petrillo, D. Neuffer, D. Stratakis

Abstract: In the final cooling stages for a muon collider, the transverse emittances are reduced while the longitudinal emittance is allowed to increase. In previous studies, Final cooling used absorbers within very high field solenoids to cool low-momentum muons. Simulations of the systems did not reach the desired cooling design goals. In this study, we develop and optimize a different conceptual design f… ▽ More In the final cooling stages for a muon collider, the transverse emittances are reduced while the longitudinal emittance is allowed to increase. In previous studies, Final cooling used absorbers within very high field solenoids to cool low-momentum muons. Simulations of the systems did not reach the desired cooling design goals. In this study, we develop and optimize a different conceptual design for the final 4D cooling channel, which is based on using dense wedge absorbers. We used G4Beamline to simulate the channel and Python to generate and analyze particle distributions. We optimized the design parameters of the cooling channel and produced conceptual designs (corresponding to possible starting points for the input beam) which achieve transverse cooling in both x and y by a factor of $\approx$ 3.5. These channels achieve a lower transverse and longitudinal emittance than the best previously published design. △ Less

Submitted 22 August, 2024; originally announced August 2024.

Comments: IPAC '24 - 15th International Conference on Particle Accelerators

Report number: FERMILAB-CONF-24-0256-AD

Interim report for the International Muon Collider Collaboration (IMCC)

Authors: C. Accettura, S. Adrian, R. Agarwal, C. Ahdida, C. Aim�, A. Aksoy, G. L. Alberghi, S. Alden, N. Amapane, D. Amorim, P. Andreetto, F. Anulli, R. Appleby, A. Apresyan, P. Asadi, M. Attia Mahmoud, B. Auchmann, J. Back, A. Badea, K. J. Bae, E. J. Bahng, L. Balconi, F. Balli, L. Bandiera, C. Barbagallo , et al. (362 additional authors not shown)

Abstract: The International Muon Collider Collaboration (IMCC) [1] was established in 2020 following the recommendations of the European Strategy for Particle Physics (ESPP) and the implementation of the European Strategy for Particle Physics-Accelerator R&D Roadmap by the Laboratory Directors Group [2], hereinafter referred to as the the European LDG roadmap. The Muon Collider Study (MuC) covers the accele… ▽ More The International Muon Collider Collaboration (IMCC) [1] was established in 2020 following the recommendations of the European Strategy for Particle Physics (ESPP) and the implementation of the European Strategy for Particle Physics-Accelerator R&D Roadmap by the Laboratory Directors Group [2], hereinafter referred to as the the European LDG roadmap. The Muon Collider Study (MuC) covers the accelerator complex, detectors and physics for a future muon collider. In 2023, European Commission support was obtained for a design study of a muon collider (MuCol) [3]. This project started on 1st March 2023, with work-packages aligned with the overall muon collider studies. In preparation of and during the 2021-22 U.S. Snowmass process, the muon collider project parameters, technical studies and physics performance studies were performed and presented in great detail. Recently, the P5 panel [4] in the U.S. recommended a muon collider R&D, proposed to join the IMCC and envisages that the U.S. should prepare to host a muon collider, calling this their "muon shot". In the past, the U.S. Muon Accelerator Programme (MAP) [5] has been instrumental in studies of concepts and technologies for a muon collider. △ Less

Submitted 17 July, 2024; originally announced July 2024.

Comments: This document summarises the International Muon Collider Collaboration (IMCC) progress and status of the Muon Collider R&D programme

Transverse Emittance Reduction in Muon Beams by Ionization Cooling

Authors: The MICE Collaboration, M. Bogomilov, R. Tsenov, G. Vankova-Kirilova, Y. P. Song, J. Y. Tang, Z. H. Li, R. Bertoni, M. Bonesini, F. Chignoli, R. Mazza, A. de Bari, D. Orestano, L. Tortora, Y. Kuno, H. Sakamoto, A. Sato, S. Ishimoto, M. Chung, C. K. Sung, F. Filthaut, M. Fedorov, D. Jokovic, D. Maletic, M. Savic , et al. (112 additional authors not shown)

Abstract: Accelerated muon beams have been considered for next-generation studies of high-energy lepton-antilepton collisions and neutrino oscillations. However, high-brightness muon beams have not yet been produced. The main challenge for muon acceleration and storage stems from the large phase-space volume occupied by the beam, derived from the muon production mechanism through the decay of pions from pro… ▽ More Accelerated muon beams have been considered for next-generation studies of high-energy lepton-antilepton collisions and neutrino oscillations. However, high-brightness muon beams have not yet been produced. The main challenge for muon acceleration and storage stems from the large phase-space volume occupied by the beam, derived from the muon production mechanism through the decay of pions from proton collisions. Ionization cooling is the technique proposed to decrease the muon beam phase-space volume. Here we demonstrate a clear signal of ionization cooling through the observation of transverse emittance reduction in beams that traverse lithium hydride or liquid hydrogen absorbers in the Muon Ionization Cooling Experiment (MICE). The measurement is well reproduced by the simulation of the experiment and the theoretical model. The results shown here represent a substantial advance towards the realization of muon-based facilities that could operate at the energy and intensity frontiers. △ Less

Submitted 13 October, 2023; v1 submitted 9 October, 2023; originally announced October 2023.

Comments: 23 pages and 5 figures

Report number: STFC-P-2023-004

Workshop on a future muon program at FNAL

Authors: S. Corrodi, Y. Oksuzian, A. Edmonds, J. Miller, H. N. Tran, R. Bonventre, D. N. Brown, F. Meot, V. Singh, Y. Kolomensky, S. Tripathy, L. Borrel, M. Bub, B. Echenard, D. G. Hitlin, H. Jafree, S. Middleton, R. Plestid, F. C. Porter, R. Y. Zhu, L. Bottura, E. Pinsard, A. M. Teixeira, C. Carelli, D. Ambrose , et al. (68 additional authors not shown)

Abstract: The Snowmass report on rare processes and precision measurements recommended Mu2e-II and a next generation muon facility at Fermilab (Advanced Muon Facility) as priorities for the frontier. The Workshop on a future muon program at FNAL was held in March 2023 to discuss design studies for Mu2e-II, organizing efforts for the next generation muon facility, and identify synergies with other efforts (e… ▽ More The Snowmass report on rare processes and precision measurements recommended Mu2e-II and a next generation muon facility at Fermilab (Advanced Muon Facility) as priorities for the frontier. The Workshop on a future muon program at FNAL was held in March 2023 to discuss design studies for Mu2e-II, organizing efforts for the next generation muon facility, and identify synergies with other efforts (e.g., muon collider). Topics included high-power targetry, status of R&D for Mu2e-II, development of compressor rings, FFA and concepts for muon experiments (conversion, decays, muonium and other opportunities) at AMF. This document summarizes the workshop discussions with a focus on future R&D tasks needed to realize these concepts. △ Less

Submitted 11 September, 2023; originally announced September 2023.

Comments: 68 pages, 36 figures

Report number: FERMILAB-CONF-23-464-PPD, CALT-TH-2023-036

Towards a Muon Collider

Authors: Carlotta Accettura, Dean Adams, Rohit Agarwal, Claudia Ahdida, Chiara Aim�, Nicola Amapane, David Amorim, Paolo Andreetto, Fabio Anulli, Robert Appleby, Artur Apresyan, Aram Apyan, Sergey Arsenyev, Pouya Asadi, Mohammed Attia Mahmoud, Aleksandr Azatov, John Back, Lorenzo Balconi, Laura Bandiera, Roger Barlow, Nazar Bartosik, Emanuela Barzi, Fabian Batsch, Matteo Bauce, J. Scott Berg , et al. (272 additional authors not shown)

Abstract: A muon collider would enable the big jump ahead in energy reach that is needed for a fruitful exploration of fundamental interactions. The challenges of producing muon collisions at high luminosity and 10 TeV centre of mass energy are being investigated by the recently-formed International Muon Collider Collaboration. This Review summarises the status and the recent advances on muon colliders desi… ▽ More A muon collider would enable the big jump ahead in energy reach that is needed for a fruitful exploration of fundamental interactions. The challenges of producing muon collisions at high luminosity and 10 TeV centre of mass energy are being investigated by the recently-formed International Muon Collider Collaboration. This Review summarises the status and the recent advances on muon colliders design, physics and detector studies. The aim is to provide a global perspective of the field and to outline directions for future work. △ Less

Submitted 27 November, 2023; v1 submitted 15 March, 2023; originally announced March 2023.

Comments: 118 pages, 103 figures

Multiple Coulomb Scattering of muons in Lithium Hydride

Authors: M. Bogomilov, R. Tsenov, G. Vankova-Kirilova, Y. P. Song, J. Y. Tang, Z. H. Li, R. Bertoni, M. Bonesini, F. Chignoli, R. Mazza, V. Palladino, A. de Bari, D. Orestano, L. Tortora, Y. Kuno, H. Sakamoto, A. Sato, S. Ishimoto, M. Chung, C. K. Sung, F. Filthaut, M. Fedorov, D. Jokovic, D. Maletic, M. Savic , et al. (112 additional authors not shown)

Abstract: Multiple Coulomb Scattering (MCS) is a well known phenomenon occurring when charged particles traverse materials. Measurements of muons traversing low $Z$ materials made in the MuScat experiment showed that theoretical models and simulation codes, such as GEANT4 (v7.0), over-estimated the scattering. The Muon Ionization Cooling Experiment (MICE) measured the cooling of a muon beam traversing a liq… ▽ More Multiple Coulomb Scattering (MCS) is a well known phenomenon occurring when charged particles traverse materials. Measurements of muons traversing low $Z$ materials made in the MuScat experiment showed that theoretical models and simulation codes, such as GEANT4 (v7.0), over-estimated the scattering. The Muon Ionization Cooling Experiment (MICE) measured the cooling of a muon beam traversing a liquid hydrogen or lithium hydride (LiH) energy absorber as part of a programme to develop muon accelerator facilities, such as a Neutrino Factory or a Muon Collider. The energy loss and MCS that occur in the absorber material are competing effects that alter the performance of the cooling channel. Therefore measurements of MCS are required in order to validate the simulations used to predict the cooling performance in future accelerator facilities. We report measurements made in the MICE apparatus of MCS using a LiH absorber and muons within the momentum range 160 to 245 MeV/c. The measured RMS scattering width is about 9% smaller than that predicted by the approximate formula proposed by the Particle Data Group. Data at 172, 200 and 240 MeV/c are compared to the GEANT4 (v9.6) default scattering model. These measurements show agreement with this more recent GEANT4 (v9.6) version over the range of incident muon momenta. △ Less

Submitted 21 September, 2022; originally announced September 2022.

Comments: 20 pages, 14 figures, journal

Report number: RAL-P-2022-001

RF Accelerator Technology R&D: Report of AF7-rf Topical Group to Snowmass 2021

Authors: Sergey Belomestnykh, Emilio A. Nanni, Hans Weise, Sergey V. Baryshev, Pashupati Dhakal, Rongli Geng, Bianca Giaccone, Chunguang Jing, Matthias Liepe, Xueying Lu, Tianhuan Luo, Ganapati Myneni, Alireza Nassiri, David Neuffer, Cho-Kuen Ng, Sam Posen, Sami Tantawi, Anne-Marie Valente-Feliciano, Jean-Luc Vay, Brandon Weatherford, Akira Yamamoto

Abstract: Accelerator radio frequency (RF) technology has been and remains critical for modern high energy physics (HEP) experiments based on particle accelerators. Tremendous progress in advancing this technology has been achieved over the past decade in several areas highlighted in this report. These achievements and new results expected from continued R&D efforts could pave the way for upgrades of existi… ▽ More Accelerator radio frequency (RF) technology has been and remains critical for modern high energy physics (HEP) experiments based on particle accelerators. Tremendous progress in advancing this technology has been achieved over the past decade in several areas highlighted in this report. These achievements and new results expected from continued R&D efforts could pave the way for upgrades of existing facilities, improvements to accelerators already under construction (e.g., PIP-II), well-developed proposals (e.g., ILC, CLIC), and/or enable concepts under development, such as FCC-ee, CEPC, C3, HELEN, multi-MW Fermilab Proton Intensity Upgrade, future Muon Colloder, etc. Advances in RF technology have impact beyond HEP on accelerators built for nuclear physics, basic energy sciences, and other areas. Recent examples of such accelerators are European XFEL, LCLS-II and LCLS-II-HE, SHINE, SNS, ESS, FRIB, and EIC. To support and enable new accelerator-based applications and even make some of them feasible, we must continue addressing their challenges via a comprehensive RF R&D program that would advance the existing RF technologies and explore the nascent ones. △ Less

Submitted 25 August, 2022; originally announced August 2022.

Comments: contribution to Snowmass 2021

An 8 GEV Linac As The Booster Replacement In The Fermilab Power Upgrade

Authors: D. Neuffer, S. Belomestnykh, M. Checchin, D. Johnson, S. Posen, E. Pozdeyev, V. Pronskikh, A. Saini, N. Solyak, V. Yakovlev

Abstract: Increasing the Fermilab Main Injector (MI) beam power above ~1.2 MW requires replacement of the 8 GeV Booster by a higher intensity alternative. Earlier, rapid-cycling synchrotron and linac solutions were considered for this purpose. In this paper, we consider the linac version that produces 8 GeV H- beam for injection into the Recycler Ring (RR) or MI The new linac takes ~1 GeV beam from the PIP-… ▽ More Increasing the Fermilab Main Injector (MI) beam power above ~1.2 MW requires replacement of the 8 GeV Booster by a higher intensity alternative. Earlier, rapid-cycling synchrotron and linac solutions were considered for this purpose. In this paper, we consider the linac version that produces 8 GeV H- beam for injection into the Recycler Ring (RR) or MI The new linac takes ~1 GeV beam from the PIP-II linac and accelerates it to ~ 2 GeV in a 650 MHz SRF linac, and then accelerates to ~8 GeV in an SRF pulsed linac using 1300 MHz cryomodules. The linac components incorporate recent improvements in SRF technology. This Booster Replacement linac (BRL) will increase MI beam power to DUNE to more than 2.5 MW and enable next-generation intensity frontier experiments. △ Less

Submitted 24 August, 2022; originally announced August 2022.

Comments: arXiv admin note: text overlap with arXiv:2203.05052

Report number: FERMILAB-CONF-22-617-AD-TD

Future Collider Options for the US

Authors: P. C. Bhat, S. Jindariani, G. Ambrosio, G. Apollinari, S. Belomestnykh, A. Bross, J. Butler, A. Canepa, D. Elvira, P. Fox, Z. Gecse, E. Gianfelice-Wendt, P. Merkel, S. Nagaitsev, D. Neuffer, H. Piekarz, S. Posen, T. Sen, V. Shiltsev, N. Solyak, D. Stratakis, M. Syphers, G. Velev, V. Yakovlev, K. Yonehara , et al. (1 additional authors not shown)

Abstract: The United States has a rich history in high energy particle accelerators and colliders -- both lepton and hadron machines, which have enabled several major discoveries in elementary particle physics. To ensure continued progress in the field, U.S. leadership as a key partner in building next generation collider facilities abroad is essential; also critically important is the exploring of options… ▽ More The United States has a rich history in high energy particle accelerators and colliders -- both lepton and hadron machines, which have enabled several major discoveries in elementary particle physics. To ensure continued progress in the field, U.S. leadership as a key partner in building next generation collider facilities abroad is essential; also critically important is the exploring of options to host a future collider in the U.S. The "Snowmass" study and the subsequent Particle Physics Project Prioritization Panel (P5) process provide the timely opportunity to develop strategies for both. What we do now will shape the future of our field and whether the U.S. will remain a world leader in these areas. In this white paper, we briefly discuss the US engagement in proposed collider projects abroad and describe future collider options for the U.S. We also call for initiating an integrated R\&D program for future colliders. △ Less

Submitted 15 March, 2022; originally announced March 2022.

Comments: Contribution to Snowmass 2021

Report number: FERMILAB-CONF-22-144-PPD

A Muon Collider Facility for Physics Discovery

Authors: D. Stratakis, N. Mokhov, M. Palmer, N. Pastrone, T. Raubenheimer, C. Rogers, D. Schulte, V. Shiltsev, J. Tang, A. Yamamoto, C. Aim�, M. A. Mahmoud, N. Bartosik, E. Barzi, A. Bersani, A. Bertolin, M. Bonesini, B. Caiffi, M. Casarsa, M. G. Catanesi, A. Cerri, C. Curatolo, M. Dam, H. Damerau, E. De Matteis , et al. (44 additional authors not shown)

Abstract: Muon colliders provide a unique route to deliver high energy collisions that enable discovery searches and precision measurements to extend our understanding of the fundamental laws of physics. The muon collider design aims to deliver physics reach at the highest energies with costs, power consumption and on a time scale that may prove favorable relative to other proposed facilities. In this conte… ▽ More Muon colliders provide a unique route to deliver high energy collisions that enable discovery searches and precision measurements to extend our understanding of the fundamental laws of physics. The muon collider design aims to deliver physics reach at the highest energies with costs, power consumption and on a time scale that may prove favorable relative to other proposed facilities. In this context, a new international collaboration has formed to further extend the design concepts and performance studies of such a machine. This effort is focused on delivering the elements of a $\sim$10 TeV center of mass (CM) energy design to explore the physics energy frontier. The path to such a machine may pass through lower energy options. Currently a 3 TeV CM stage is considered. Other energy stages could also be explored, e.g. an s-channel Higgs Factory operating at 125 GeV CM. We describe the status of the R&D and design effort towards such a machine and lay out a plan to bring these concepts to maturity as a tool for the high energy physics community. △ Less

Submitted 15 March, 2022; originally announced March 2022.

Comments: 23 pages, 3 figures. arXiv admin note: text overlap with arXiv:2201.07895

Promising Technologies and R&D Directions for the Future Muon Collider Detectors

Authors: Sergo Jindariani, Federico Meloni, Nadia Pastrone, Chiara Aim�, Nazar Bartosik, Emanuela Barzi, Alessandro Bertolin, Alessandro Braghieri, Laura Buonincontri, Simone Calzaferri, Massimo Casarsa, Maria Gabriella Catanesi, Alessandro Cerri, Grigorios Chachamis, Anna Colaleo, Camilla Curatolo, Giacomo Da Molin, Jean-Pierre Delahaye, Biagio Di Micco, Tommaso Dorigo, Filippo Errico, Davide Fiorina, Alessio Gianelle, Carlo Giraldin, John Hauptman , et al. (36 additional authors not shown)

Abstract: Among the post-LHC generation of particle accelerators, the muon collider represents a unique machine with capability to provide very high energy leptonic collisions and to open the path to a vast and mostly unexplored physics programme. However, on the experimental side, such great physics potential is accompanied by unprecedented technological challenges, due to the fact that muons are unstable… ▽ More Among the post-LHC generation of particle accelerators, the muon collider represents a unique machine with capability to provide very high energy leptonic collisions and to open the path to a vast and mostly unexplored physics programme. However, on the experimental side, such great physics potential is accompanied by unprecedented technological challenges, due to the fact that muons are unstable particles. Their decay products interact with the machine elements and produce an intense flux of background particles that eventually reach the detector and may degrade its performance. In this paper, we present technologies that have a potential to match the challenging specifications of a muon collider detector and outline a path forward for the future R&D efforts. △ Less

Submitted 14 March, 2022; originally announced March 2022.

Comments: Contribution to Snowmass 2021, 27 pages, 15 figures

An 8 GeV Linac as the Booster Replacement in the Fermilab Power Upgrade: a Snowmass 2021 White Paper

Authors: S. Belomestnykh, M. Checchin, D. Johnson, D. Neuffer, H. Padamsee, S. Posen, E. Pozdeyev, V. Pronskikh, A. Saini, N. Solyak, V. Yakovlev

Abstract: Following the PIP-II 800 MeV Linac, Fermilab will need an accelerator that extends from that linac to the MI injection energy of ~8 GeV, completing the modernization of the Fermilab high-intensity accelerator complex. This will maximize the beam available for neutrino production for the long baseline DUNE experiment to greater than 2.5 MW and enable a next generation of intensity frontier experime… ▽ More Following the PIP-II 800 MeV Linac, Fermilab will need an accelerator that extends from that linac to the MI injection energy of ~8 GeV, completing the modernization of the Fermilab high-intensity accelerator complex. This will maximize the beam available for neutrino production for the long baseline DUNE experiment to greater than 2.5 MW and enable a next generation of intensity frontier experiments. In this white paper, we propose an 8 GeV Linac for that purpose. The Linac consists of an extension of the PIP-II Linac to ~2 GeV using PIP-II 650 MHz SRF cryomodules, followed by a 2 -->8.0 GeV Linac composed of 1300 MHz SRF cryomodules, based upon the LCLS-II cryomodules developed at Fermilab. The 8 GeV Linac will incorporate recent improvements in SRF technology. The research needed to implement this Linac is described. △ Less

Submitted 2 June, 2023; v1 submitted 9 March, 2022; originally announced March 2022.

Comments: contribution to Snowmass 2021

Physics Opportunities for the Fermilab Booster Replacement

Authors: John Arrington, Joshua Barrow, Brian Batell, Robert Bernstein, Nikita Blinov, S. J. Brice, Ray Culbertson, Patrick deNiverville, Vito Di Benedetto, Jeff Eldred, Angela Fava, Laura Fields, Alex Friedland, Andrei Gaponenko, Corrado Gatto, Stefania Gori, Roni Harnik, Richard J. Hill, Daniel M. Kaplan, Kevin J. Kelly, Mandy Kiburg, Tom Kobilarcik, Gordan Krnjaic, Gabriel Lee, B. R. Littlejohn , et al. (27 additional authors not shown)

Abstract: This white paper presents opportunities afforded by the Fermilab Booster Replacement and its various options. Its goal is to inform the design process of the Booster Replacement about the accelerator needs of the various options, allowing the design to be versatile and enable, or leave the door open to, as many options as possible. The physics themes covered by the paper include searches for dark… ▽ More This white paper presents opportunities afforded by the Fermilab Booster Replacement and its various options. Its goal is to inform the design process of the Booster Replacement about the accelerator needs of the various options, allowing the design to be versatile and enable, or leave the door open to, as many options as possible. The physics themes covered by the paper include searches for dark sectors and new opportunities with muons. △ Less

Submitted 8 March, 2022; originally announced March 2022.

Comments: Snowmass white paper

Report number: FERMILAB-FN-1145, LA-UR-22-21987

Performance of the MICE diagnostic system

Authors: The MICE collaboration, M. Bogomilov, R. Tsenov, G. Vankova-Kirilova, Y. P. Song, J. Y. Tang, Z. H. Li, R. Bertoni, M. Bonesini, F. Chignoli, R. Mazza, V. Palladino, A. de Bari, D. Orestano, L. Tortora, Y. Kuno, H. Sakamoto, A. Sato, S. Ishimoto, M. Chung, C. K. Sung, F. Filthaut, M. Fedorov, D. Jokovic, D. Maletic , et al. (113 additional authors not shown)

Abstract: Muon beams of low emittance provide the basis for the intense, well-characterised neutrino beams of a neutrino factory and for multi-TeV lepton-antilepton collisions at a muon collider. The international Muon Ionization Cooling Experiment (MICE) has demonstrated the principle of ionization cooling, the technique by which it is proposed to reduce the phase-space volume occupied by the muon beam at… ▽ More Muon beams of low emittance provide the basis for the intense, well-characterised neutrino beams of a neutrino factory and for multi-TeV lepton-antilepton collisions at a muon collider. The international Muon Ionization Cooling Experiment (MICE) has demonstrated the principle of ionization cooling, the technique by which it is proposed to reduce the phase-space volume occupied by the muon beam at such facilities. This paper documents the performance of the detectors used in MICE to measure the muon-beam parameters, and the physical properties of the liquid hydrogen energy absorber during running. △ Less

Submitted 16 August, 2021; v1 submitted 10 June, 2021; originally announced June 2021.

Comments: 27 pages, 18 figures

Report number: RAL-P-2021-001

Journal ref: 2021 JINST 16 P08046

An Upgrade Path for the Fermilab Accelerator Complex

Authors: R. Ainsworth, J. Dey, J. Eldred, R. Harnik, J. Jarvis, D. E. Johnson, I. Kourbanis, D. Neuffer, E. Pozdeyev, M. J. Syphers, A. Valishev, V. P. Yakovlev, R. Zwaska

Abstract: The completion of the PIP-II project and its superconducting linear accelerator will provide up to 1.2 MW of beam power to the LBNF/DUNE facility for neutrino physics. It will also be able to produce high-power beams directly from the linac that can be used for lower-energy particle physics experiments as well, such as directing beam toward the Muon Campus at Fermilab for example. Any further sign… ▽ More The completion of the PIP-II project and its superconducting linear accelerator will provide up to 1.2 MW of beam power to the LBNF/DUNE facility for neutrino physics. It will also be able to produce high-power beams directly from the linac that can be used for lower-energy particle physics experiments as well, such as directing beam toward the Muon Campus at Fermilab for example. Any further significant upgrade of the beam power to DUNE, however, will be impeded by the limitations of the present Booster synchrotron at the facility. To increase the power to DUNE by a factor of two would require a new accelerator arrangement to feed the Main Injector that does not include the Booster. In what follows, a path toward upgrading the Fermilab accelerator complex to bring the beam power for DUNE to 2.4 MW is presented, using a new rapid-cycling synchrotron plus an energy upgrade to the PIP-II linac. The path includes the ability to instigate a new lower-energy, very high-power beam delivery system for experiments that can address much of the science program presented by the Booster Replacement Science Working Group. It also allows for the future possibility to go beyond 2.4 MW up to roughly 4 MW from the Main Injector. △ Less

Submitted 11 March, 2022; v1 submitted 3 June, 2021; originally announced June 2021.

Comments: 54 pages, 26 figures (also one table with a figure, counting each figure with multiple images), 35 references. Snowmass 21 White Paper

Report number: TM-2754-AD-APC-PIP2-TD

Unconventional Ideas for Ionization Cooling of Muons

Authors: T. L. Hart, J. G. Acosta, L. M. Cremaldi, D. V. Neuffer, S. J. Oliveros, D. Stratakis, D. J. Summers, K. Yonehara

Abstract: Small muon beams increase the luminosity of a muon collider. Reducing the momentum and position spreads of muons reduces emittance and leads to small, cool beams. Ionization cooling has been observed at the Muon Ionization Cooling Experiment. 6D emittance reduction by a factor of 100, 000 has been achieved in simulation. Another factor of 5 in cooling would meet the basic requirements of a high lu… ▽ More Small muon beams increase the luminosity of a muon collider. Reducing the momentum and position spreads of muons reduces emittance and leads to small, cool beams. Ionization cooling has been observed at the Muon Ionization Cooling Experiment. 6D emittance reduction by a factor of 100, 000 has been achieved in simulation. Another factor of 5 in cooling would meet the basic requirements of a high luminosity muon collider. In this paper we compare, for the first time, the amount of RF needed in a cooling channel to previous linacs. We also outline three methods aimed to help achieve a final factor of 5 in 6D cooling. △ Less

Submitted 13 January, 2020; v1 submitted 1 November, 2019; originally announced November 2019.

Comments: 18 pages, 5 figures, explanations added

First demonstration of ionization cooling by the Muon Ionization Cooling Experiment

Authors: M. Bogomilov, R. Tsenov, G. Vankova-Kirilova, Y. P. Song, J. Y. Tang, Z. H. Li, R. Bertoni, M. Bonesini, F. Chignoli, R. Mazza, V. Palladino, A. de Bari, D. Orestano, L. Tortora, Y. Kuno, H. Sakamoto, A. Sato, S. Ishimoto, M. Chung, C. K. Sung, F. Filthaut, D. Jokovic, D. Maletic, M. Savic, N. Jovancevic , et al. (110 additional authors not shown)

Abstract: High-brightness muon beams of energy comparable to those produced by state-of-the-art electron, proton and ion accelerators have yet to be realised. Such beams have the potential to carry the search for new phenomena in lepton-antilepton collisions to extremely high energy and also to provide uniquely well-characterised neutrino beams. A muon beam may be created through the decay of pions produced… ▽ More High-brightness muon beams of energy comparable to those produced by state-of-the-art electron, proton and ion accelerators have yet to be realised. Such beams have the potential to carry the search for new phenomena in lepton-antilepton collisions to extremely high energy and also to provide uniquely well-characterised neutrino beams. A muon beam may be created through the decay of pions produced in the interaction of a proton beam with a target. To produce a high-brightness beam from such a source requires that the phase space volume occupied by the muons be reduced (cooled). Ionization cooling is the novel technique by which it is proposed to cool the beam. The Muon Ionization Cooling Experiment collaboration has constructed a section of an ionization cooling cell and used it to provide the first demonstration of ionization cooling. We present these ground-breaking measurements. △ Less

Submitted 19 July, 2019; originally announced July 2019.

Comments: 19 pages and 6 figures

Report number: RAL-P-2019-003

On The Feasibility of a Pulsed 14 TeV c.m.e. Muon Collider in the LHC Tunnel

Authors: D. Neuffer, V. Shiltsev

Abstract: We discuss the technical feasibility, key machine parameters and major challenges of a 14 TeV c.m.e. muon-muon collider in the LHC tunnel. The luminosity of the collider is evaluated for three alternative muon sources - the PS synchrotron, one of a type developed by the US Muon Accelerator Program (MAP) and a low-emittance option based on resonant muon pair production. Project affordability is als… ▽ More We discuss the technical feasibility, key machine parameters and major challenges of a 14 TeV c.m.e. muon-muon collider in the LHC tunnel. The luminosity of the collider is evaluated for three alternative muon sources - the PS synchrotron, one of a type developed by the US Muon Accelerator Program (MAP) and a low-emittance option based on resonant muon pair production. Project affordability is also discussed. △ Less

Submitted 26 November, 2018; originally announced November 2018.

Comments: 11 p. Version accepted by publisher

Report number: FERMILAB-PUB-18-508-APC

First particle-by-particle measurement of emittance in the Muon Ionization Cooling Experiment

Authors: The MICE Collaboration, D. Adams, D. Adey, R. Asfandiyarov, G. Barber, A. de Bari, R. Bayes, V. Bayliss, R. Bertoni, V. Blackmore, A. Blondel, J. Boehm, M. Bogomilov, M. Bonesini, C. N. Booth, D. Bowring, S. Boyd, T. W. Bradshaw, A. D. Bross, C. Brown, L. Coney, G. Charnley, G. T. Chatzitheodoridis, F. Chignoli, M. Chung , et al. (111 additional authors not shown)

Abstract: The Muon Ionization Cooling Experiment (MICE) collaboration seeks to demonstrate the feasibility of ionization cooling, the technique by which it is proposed to cool the muon beam at a future neutrino factory or muon collider. The emittance is measured from an ensemble of muons assembled from those that pass through the experiment. A pure muon ensemble is selected using a particle-identification s… ▽ More The Muon Ionization Cooling Experiment (MICE) collaboration seeks to demonstrate the feasibility of ionization cooling, the technique by which it is proposed to cool the muon beam at a future neutrino factory or muon collider. The emittance is measured from an ensemble of muons assembled from those that pass through the experiment. A pure muon ensemble is selected using a particle-identification system that can reject efficiently both pions and electrons. The position and momentum of each muon are measured using a high-precision scintillating-fibre tracker in a 4\,T solenoidal magnetic field. This paper presents the techniques used to reconstruct the phase-space distributions and reports the first particle-by-particle measurement of the emittance of the MICE Muon Beam as a function of muon-beam momentum. △ Less

Submitted 26 March, 2019; v1 submitted 31 October, 2018; originally announced October 2018.

Operation of normal-conducting RF cavities in multi-tesla magnetic fields for muon ionization cooling: a feasibility demonstration

Authors: Daniel Bowring, Alexey Kochemirovskiy, Yagmur Torun, Chris Adolphsen, Alan Bross, Moses Chung, Ben Freemire, Lixin Ge, Andrew Haase, Peter Lane, Maria Leonova, Derun Li, Zenghai Li, Ao Liu, Tianhuan Luo, David Martin, Alfred Moretti, David Neuffer, Ralph Pasquinelli, Mark Palmer, David Peterson, Milorad Popovic, Diktys Stratakis, Katsuya Yonehara

Abstract: Ionization cooling is the preferred method for producing bright muon beams. This cooling technique requires the operation of normal conducting, radio-frequency (RF) accelerating cavities within the multi-tesla fields of DC solenoid magnets. Under these conditions, cavities exhibit increased susceptibility to RF breakdown, which can damage channel components and imposes limits on channel length and… ▽ More Ionization cooling is the preferred method for producing bright muon beams. This cooling technique requires the operation of normal conducting, radio-frequency (RF) accelerating cavities within the multi-tesla fields of DC solenoid magnets. Under these conditions, cavities exhibit increased susceptibility to RF breakdown, which can damage channel components and imposes limits on channel length and transmission efficiency. We present a solution to the problem of breakdown in strong magnetic fields. We report, for the first time, stable high-vacuum, copper cavity operation at gradients above 50 MV/m and in an external magnetic field of three tesla. This eliminates a significant technical risk that has previously been inherent in ionization cooling channel designs. △ Less

Submitted 10 July, 2018; originally announced July 2018.

Comments: 7 pages, 7 figures

Journal ref: Phys. Rev. Accel. Beams 23, 072001 (2020)

A Non-Parametric Density Estimation Approach to Measuring Beam Cooling in MICE

Authors: Tanaz Angelina Mohayai, Pavel Snopok, David Neuffer

Abstract: The goal of the international Muon Ionization Cooling Experiment (MICE) is to demonstrate muon beam ionization cooling for the first time. It constitutes a key part of the R&D towards a future neutrino factory or muon collider. The intended MICE precision requires the development of analysis tools that can account for any effects (e.g., optical aberrations) which may lead to inaccurate cooling mea… ▽ More The goal of the international Muon Ionization Cooling Experiment (MICE) is to demonstrate muon beam ionization cooling for the first time. It constitutes a key part of the R&D towards a future neutrino factory or muon collider. The intended MICE precision requires the development of analysis tools that can account for any effects (e.g., optical aberrations) which may lead to inaccurate cooling measurements. Non-parametric density estimation techniques, in particular, kernel density estimation (KDE), allow very precise calculations of the muon beam phase-space density and its increase as a result of cooling. In this study, kernel density estimation technique and its application to measuring the reduction in MICE muon beam phase-space volume is investigated. △ Less

Submitted 5 June, 2018; originally announced June 2018.

Comments: 9th International Particle Accelerator Conference (IPAC 2018) Conference. C18-04-29

A Wedge Test in MICE

Authors: Tanaz Angelina Mohayai, Pavel Snopok, David Neuffer, Don Summers

Abstract: Emittance exchange mediated by wedge absorbers can be used for longitudinal ionization cooling and for final transverse emittance minimization for a muon collider. A wedge absorber within the Muon Ionization Cooling Experiment (MICE) could serve as a demonstration of the type of emittance exchange needed for six-dimensional (6D) cooling, including the configurations needed for muon colliders. Para… ▽ More Emittance exchange mediated by wedge absorbers can be used for longitudinal ionization cooling and for final transverse emittance minimization for a muon collider. A wedge absorber within the Muon Ionization Cooling Experiment (MICE) could serve as a demonstration of the type of emittance exchange needed for six-dimensional (6D) cooling, including the configurations needed for muon colliders. Parameters for this test have been explored in simulation and applied to experimental configurations using a wedge-shaped absorber. A polyethylene wedge absorber has been fabricated and placed in MICE and data has been collected for both direct emittance exchange, where the longitudinal emittance decreases, and reverse emittance exchange, where the transverse emittance decreases. The simulation studies that led to the magnet and beam configurations are presented. △ Less

Submitted 5 June, 2018; originally announced June 2018.

Comments: 9th International Particle Accelerator Conference (IPAC 2018) Conference. C18-04-29

The NuMAX Long Baseline Neutrino Factory Concept

Authors: J-P. Delahaye, C. M. Ankenbrandt, S. A. Bogacz, P. Huber, H. G. Kirk, D. Neuffer, M. A. Palmer, R. Ryne, P. V. Snopok

Abstract: A Neutrino Factory where neutrinos of all species are produced in equal quantities by muon decay is described as a facility at the intensity frontier for exquisite precision providing ideal conditions for ultimate neutrino studies and the ideal complement to Long Baseline Facilities like LBNF at Fermilab. It is foreseen to be built in stages with progressively increasing complexity and performance… ▽ More A Neutrino Factory where neutrinos of all species are produced in equal quantities by muon decay is described as a facility at the intensity frontier for exquisite precision providing ideal conditions for ultimate neutrino studies and the ideal complement to Long Baseline Facilities like LBNF at Fermilab. It is foreseen to be built in stages with progressively increasing complexity and performance, taking advantage of existing or proposed facilities at an existing laboratory like Fermilab. A tentative layout based on a recirculating linac providing opportunities for considerable saving is discussed as well as its possible evolution toward a muon collider if and when requested by Physics. Tentative parameters of the various stages are presented as well as the necessary R&D to address the technological issues and demonstrate their feasibility. △ Less

Submitted 7 May, 2018; v1 submitted 19 March, 2018; originally announced March 2018.

Comments: JINST Special Issue on Muon Accelerators. arXiv admin note: text overlap with arXiv:1308.0494, arXiv:1502.01647

Expression of Interest for Evolution of the Mu2e Experiment

Authors: F. Abusalma, D. Ambrose, A. Artikov, R. Bernstein, G. C. Blazey, C. Bloise, S. Boi, T. Bolton, J. Bono, R. Bonventre, D. Bowring, D. Brown, D. Brown, K. Byrum, M. Campbell, J. -F. Caron, F. Cervelli, D. Chokheli, K. Ciampa, R. Ciolini, R. Coleman, D. Cronin-Hennessy, R. Culbertson, M. A. Cummings, A. Daniel , et al. (103 additional authors not shown)

Abstract: We propose an evolution of the Mu2e experiment, called Mu2e-II, that would leverage advances in detector technology and utilize the increased proton intensity provided by the Fermilab PIP-II upgrade to improve the sensitivity for neutrinoless muon-to-electron conversion by one order of magnitude beyond the Mu2e experiment, providing the deepest probe of charged lepton flavor violation in the fores… ▽ More We propose an evolution of the Mu2e experiment, called Mu2e-II, that would leverage advances in detector technology and utilize the increased proton intensity provided by the Fermilab PIP-II upgrade to improve the sensitivity for neutrinoless muon-to-electron conversion by one order of magnitude beyond the Mu2e experiment, providing the deepest probe of charged lepton flavor violation in the foreseeable future. Mu2e-II will use as much of the Mu2e infrastructure as possible, providing, where required, improvements to the Mu2e apparatus to accommodate the increased beam intensity and cope with the accompanying increase in backgrounds. △ Less

Submitted 7 February, 2018; originally announced February 2018.

Comments: 17 pages, 4 figures, 1 table; Submitted to the Fermilab Physics Advisory Committee

Report number: Fermilab-FN-1052

Muon intensity increase by wedge absorbers for low-e muon experiments

Authors: D. V. Neuffer, D. Stratakis, J. Bradley

Abstract: Low energy muon experiments such as mu2e and g-2 have a limited energy spread acceptance. Following techniques developed in muon cooling studies and the MICE experiment, the number of muons within the desired energy spread can be increased by the matched use of wedge absorbers. More generally, the phase space of muon beams can be manipulated by absorbers in beam transport lines. Applications with… ▽ More Low energy muon experiments such as mu2e and g-2 have a limited energy spread acceptance. Following techniques developed in muon cooling studies and the MICE experiment, the number of muons within the desired energy spread can be increased by the matched use of wedge absorbers. More generally, the phase space of muon beams can be manipulated by absorbers in beam transport lines. Applications with simulation results are presented. △ Less

Submitted 19 January, 2018; originally announced January 2018.

Comments: 5 pp

Report number: Fermilab-Conf-17-398-AD-APC

Front End for a Neutrino Factory or Muon Collider

Authors: David Neuffer, Pavel Snopok, Yuri Alexahin

Abstract: A neutrino factory or muon collider requires the capture and cooling of a large number of muons. Scenarios for capture, bunching, phase-energy rotation and initial cooling of μ's produced from a proton source target have been developed, initially for neutrino factory scenarios. They require a drift section from the target, a bunching section and a φ-δE rotation section leading into the cooling cha… ▽ More A neutrino factory or muon collider requires the capture and cooling of a large number of muons. Scenarios for capture, bunching, phase-energy rotation and initial cooling of μ's produced from a proton source target have been developed, initially for neutrino factory scenarios. They require a drift section from the target, a bunching section and a φ-δE rotation section leading into the cooling channel. Important concerns are rf limitations within the focusing magnetic fields and large losses in the transport. The currently preferred cooling channel design is an "HFOFO Snake" configuration that cools both μ+ and μ- transversely and longitudinally. The status of the design is presented and variations are discussed. △ Less

Submitted 29 November, 2017; originally announced November 2017.

Comments: 14 pp. arXiv admin note: substantial text overlap with arXiv:1612.08977

Report number: Fermilab-Pub-16-188-AD-APC

Novel Application of Density Estimation Techniques in Muon Ionization Cooling Experiment

Authors: Tanaz Angelina Mohayai, Pavel Snopok, David Neuffer, Chris Rogers

Abstract: The international Muon Ionization Cooling Experiment (MICE) aims to demonstrate muon beam ionization cooling for the first time and constitutes a key part of the R&D towards a future neutrino factory or muon collider. Beam cooling reduces the size of the phase space volume occupied by the beam. Non-parametric density estimation techniques allow very precise calculation of the muon beam phase-space… ▽ More The international Muon Ionization Cooling Experiment (MICE) aims to demonstrate muon beam ionization cooling for the first time and constitutes a key part of the R&D towards a future neutrino factory or muon collider. Beam cooling reduces the size of the phase space volume occupied by the beam. Non-parametric density estimation techniques allow very precise calculation of the muon beam phase-space density and its increase as a result of cooling. These density estimation techniques are investigated in this paper and applied in order to estimate the reduction in muon beam size in MICE under various conditions. △ Less

Submitted 12 October, 2017; originally announced October 2017.

Comments: Talk presented at the APS Division of Particles and Fields Meeting (DPF 2017), July 31-August 4, 2017, Fermilab. C170731

Use of Wedge Absorbers in MICE

Authors: David Neuffer, D. Summers, T. Mohayai, P. Snopok, C. Rogers

Abstract: Wedge absorbers are needed to obtain longitudinal cooling in ionization cooling. They also can be used to obtain emittance exchanges between longitudinal and transverse phase space. There can be large exchanges in emittance, even with single wedges. In the present note we explore the use of wedge absorbers in the MICE experiment to obtain transverse-longitudinal emittance exchanges within present… ▽ More Wedge absorbers are needed to obtain longitudinal cooling in ionization cooling. They also can be used to obtain emittance exchanges between longitudinal and transverse phase space. There can be large exchanges in emittance, even with single wedges. In the present note we explore the use of wedge absorbers in the MICE experiment to obtain transverse-longitudinal emittance exchanges within present and future operational conditions. The same wedge can be used to explore "direct" and "reverse" emittance exchange dynamics, where direct indicates a configuration that reduces momentum spread and reverse is a configuration that increases momentum spread. Analytical estimated and ICOOL and G4BeamLine simulations of the exchanges at MICE parameters are presented. Large exchanges can be obtained in both reverse and direct configurations. △ Less

Submitted 12 September, 2017; originally announced September 2017.

Comments: 10 pp. arXiv admin note: text overlap with arXiv:1612.08960, arXiv:1704.07889

Report number: Fermilab-FN-1028-AD-APC

Wedge Absorbers In Final Cooling For A High-Energy High Luminosity Lepton Collider

Authors: David Neuffer, D. Summers, P. Snopok, T. Mohayai

Abstract: A high-energy muon collider scenario requires a final cooling system that reduces transverse emittance to ~25 microns (normalized) while allowing longitudinal emittance increase. Ionization cooling using high-field solenoids (or Li Lens) can reduce transverse emittances to ~100 microns in readily achievable configurations, confirmed by simulation. Passing these muon beams at ~100 MeV/c through cm-… ▽ More A high-energy muon collider scenario requires a final cooling system that reduces transverse emittance to ~25 microns (normalized) while allowing longitudinal emittance increase. Ionization cooling using high-field solenoids (or Li Lens) can reduce transverse emittances to ~100 microns in readily achievable configurations, confirmed by simulation. Passing these muon beams at ~100 MeV/c through cm-sized diamond wedges can reduce transverse emittances to ~25 microns, while increasing longitudinal emittances by a factor of ~25. Implementation will require optical matching of the exiting beam into downstream acceleration systems. △ Less

Submitted 25 April, 2017; originally announced April 2017.

Comments: 3 pp. arXiv admin note: text overlap with arXiv:1612.08960

Report number: Fermilab-Conf-16-133-AD-APC

A Muon Source Proton Driver At JPARC-Based Parameters

Authors: D. Neuffer

Abstract: An "ultimate" high intensity proton source for neutrino factories and/or muon colliders was projected to be a ~4 MW multi-GeV proton source providing short, intense proton pulses at ~15 Hz. The JPARC ~1 MW accelerators provide beam at parameters that in many respects overlap these goals. Proton pulses from the JPARC Main Ring can readily meet the pulsed intensity goals. We explore these parameters… ▽ More An "ultimate" high intensity proton source for neutrino factories and/or muon colliders was projected to be a ~4 MW multi-GeV proton source providing short, intense proton pulses at ~15 Hz. The JPARC ~1 MW accelerators provide beam at parameters that in many respects overlap these goals. Proton pulses from the JPARC Main Ring can readily meet the pulsed intensity goals. We explore these parameters, describing the overlap and consider extensions that may take a JPARC-like facility toward this "ultimate" source. JPARC itself could serve as a stage 1 source for such a facility. △ Less

Submitted 25 April, 2017; originally announced April 2017.

Comments: 3 pp

Report number: Fermilab-Conf-16-134-AD-APC

Exploration of a High Luminosity 100 TeV Proton Antiproton Collider

Authors: Sandra Oliveros, Don Summers, Lucien Cremaldi, John Acosta, David Neuffer

Abstract: New physics is being explored with the Large Hadron Collider at CERN and with Intensity Frontier programs at Fermilab and KEK. The energy scale for new physics is known to be in the multi-TeV range, signaling the need for a future collider which well surpasses this energy scale. We explore a 10$^{\,34}$ cm$^{-2}$ s$^{-1}$ luminosity, 100 TeV $p\bar{p}$ collider with 7$\times$ the energy of the LHC… ▽ More New physics is being explored with the Large Hadron Collider at CERN and with Intensity Frontier programs at Fermilab and KEK. The energy scale for new physics is known to be in the multi-TeV range, signaling the need for a future collider which well surpasses this energy scale. We explore a 10$^{\,34}$ cm$^{-2}$ s$^{-1}$ luminosity, 100 TeV $p\bar{p}$ collider with 7$\times$ the energy of the LHC but only 2$\times$ as much NbTi superconductor, motivating the choice of 4.5 T single bore dipoles. The cross section for many high mass states is 10 times higher in $p\bar{p}$ than $pp$ collisions. Antiquarks for production can come directly from an antiproton rather than indirectly from gluon splitting. The higher cross sections reduce the synchrotron radiation in superconducting magnets and the number of events per beam crossing, because lower beam currents can produce the same rare event rates. Events are more centrally produced, allowing a more compact detector with less space between quadrupole triplets and a smaller $β^{*}$ for higher luminosity. A Fermilab-like $\bar p$ source would disperse the beam into 12 momentum channels to capture more antiprotons. Because stochastic cooling time scales as the number of particles, 12 cooling ring sets would be used. Each set would include phase rotation to lower momentum spreads, equalize all momentum channels, and stochastically cool. One electron cooling ring would follow the stochastic cooling rings. Finally antiprotons would be recycled during runs without leaving the collider ring by joining them to new bunches with synchrotron damping. △ Less

Submitted 26 April, 2017; v1 submitted 12 April, 2017; originally announced April 2017.

Comments: 11 pages, 20 figures, SESAPS 2015 Conference. Reference corrected

Report number: SESAPS-2015-F1-4

A FODO racetrack ring design and optimization for nuSTORM

Authors: Ao Liu, Alan Bross, David Neuffer

Abstract: The goal of nuSTORM is to provide well-defined neutrino beams for precise measurements of neutrino cross-sections and oscillations. The nuSTORM decay ring is a compact racetrack storage ring with a circumference of ~480 m that incorporates large aperture (60 cm diameter) magnets. There are many challenges in the design. In order to incorporate the Orbit Combination Section (OCS), used for injectin… ▽ More The goal of nuSTORM is to provide well-defined neutrino beams for precise measurements of neutrino cross-sections and oscillations. The nuSTORM decay ring is a compact racetrack storage ring with a circumference of ~480 m that incorporates large aperture (60 cm diameter) magnets. There are many challenges in the design. In order to incorporate the Orbit Combination Section (OCS), used for injecting the pion beam into the ring, a dispersion suppressor is needed adjacent to the OCS. Concurrently, in order to maximize the number of useful muon decays, strong bending dipoles are needed in the arcs to minimize the arc length. These dipoles create strong chromatic effects, which need to be corrected by nonlinear sextupole elements in the ring. In this paper, a FODO racetrack ring design and its optimization using sextupolar fields via both a Genetic Algorithm (GA) and a Simulated Annealing (SA) algorithm will be discussed. △ Less

Submitted 19 June, 2017; v1 submitted 3 April, 2017; originally announced April 2017.

Concepts for a Muon Accelerator Front-End

Authors: Diktys Stratakis, Scott Berg, David Neuffer

Abstract: We present a muon capture front-end scheme for muon based applications. In this Front-End design, a proton bunch strikes a target and creates secondary pions that drift into a capture channel, decaying into muons. A series of rf cavities forms the resulting muon beams into a series of bunches of differerent energies, aligns the bunches to equal central energies, and initiates ionization cooling. W… ▽ More We present a muon capture front-end scheme for muon based applications. In this Front-End design, a proton bunch strikes a target and creates secondary pions that drift into a capture channel, decaying into muons. A series of rf cavities forms the resulting muon beams into a series of bunches of differerent energies, aligns the bunches to equal central energies, and initiates ionization cooling. We also discuss the design of a chicane system for the removal of unwanted secondary particles from the muon capture region and thus reduce activation of the machine. With the aid of numerical simulations we evaluate the performance of this Front-End scheme as well as study its sensitivity against key parameters such as the type of target, the number of rf cavities and the gas pressure of the channel. △ Less

Submitted 16 March, 2017; originally announced March 2017.

Comments: arXiv admin note: substantial text overlap with arXiv:1504.00380

Design and expected performance of the MICE demonstration of ionization cooling

Authors: MICE Collaboration, M. Bogomilov, R. Tsenov, G. Vankova-Kirilova, Y. Song, J. Tang, Z. Li, R. Bertoni, M. Bonesini, F. Chignoli, R. Mazza, V. Palladino, A. de Bari, G. Cecchet, D. Orestano, L. Tortora, Y. Kuno, S. Ishimoto, F. Filthaut, D. Jokovic, D. Maletic, M. Savic, O. M. Hansen, S. Ramberger, M. Vretenar , et al. (107 additional authors not shown)

Abstract: Muon beams of low emittance provide the basis for the intense, well-characterised neutrino beams necessary to elucidate the physics of flavour at a neutrino factory and to provide lepton-antilepton collisions at energies of up to several TeV at a muon collider. The international Muon Ionization Cooling Experiment (MICE) aims to demonstrate ionization cooling, the technique by which it is proposed… ▽ More Muon beams of low emittance provide the basis for the intense, well-characterised neutrino beams necessary to elucidate the physics of flavour at a neutrino factory and to provide lepton-antilepton collisions at energies of up to several TeV at a muon collider. The international Muon Ionization Cooling Experiment (MICE) aims to demonstrate ionization cooling, the technique by which it is proposed to reduce the phase-space volume occupied by the muon beam at such facilities. In an ionization-cooling channel, the muon beam passes through a material in which it loses energy. The energy lost is then replaced using RF cavities. The combined effect of energy loss and re-acceleration is to reduce the transverse emittance of the beam (transverse cooling). A major revision of the scope of the project was carried out over the summer of 2014. The revised experiment can deliver a demonstration of ionization cooling. The design of the cooling demonstration experiment will be described together with its predicted cooling performance. △ Less

Submitted 27 January, 2017; v1 submitted 23 January, 2017; originally announced January 2017.

Comments: 21 pages, 10 figures

Report number: RAL-P-2017-002

Journal ref: Phys. Rev. Accel. Beams 20, 063501 (2017)

Front End And HFOFO Snake For a Muon Facility

Authors: D. Neuffer, Y. Alexahin

Abstract: A neutrino factory or muon collider requires the capture and cooling of a large number of muons. Scenarios for capture, bunching, phase-energy rotation and initial cooling of μ's produced from a proton source target have been developed, for neutrino factory and muon collider scenarios. They require a drift section from the target, a bunching section and a φ-δE rotation section leading into the coo… ▽ More A neutrino factory or muon collider requires the capture and cooling of a large number of muons. Scenarios for capture, bunching, phase-energy rotation and initial cooling of μ's produced from a proton source target have been developed, for neutrino factory and muon collider scenarios. They require a drift section from the target, a bunching section and a φ-δE rotation section leading into the cooling channel. The currently preferred cooling channel design is an "HFOFO Snake" configuration that cools both μ+ and μ- transversely and longitudinally. The status of the design is presented and variations are discussed. △ Less

Submitted 28 December, 2016; originally announced December 2016.

Comments: 5 pp

Report number: Fermilab-Conf-15-523-AD-APC

Final Cooling for a High-Energy High-Luminosity Lepton Collider

Authors: David Neuffer, Hisham Sayed, Terry Hart, Don Summers

Abstract: A high-energy muon collider scenario require a "final cooling" system that reduces transverse emittance by a factor of ~10 while allowing longitudinal emittance increase. The baseline approach has low-energy transverse cooling within high-field solenoids, with strong longitudinal heating. This approach and its recent simulation are discussed. Alternative approaches which more explicitly include em… ▽ More A high-energy muon collider scenario require a "final cooling" system that reduces transverse emittance by a factor of ~10 while allowing longitudinal emittance increase. The baseline approach has low-energy transverse cooling within high-field solenoids, with strong longitudinal heating. This approach and its recent simulation are discussed. Alternative approaches which more explicitly include emittance exchange are also presented. Round-to-flat beam transform, transverse slicing, and longitudinal bunch coalescence are possible components of an alternative approach. Wedge-based emittance exchange could provide much of the required transverse cooling with longitudinal heating. Li-lens and quadrupole focusing systems could also provide much of the required final cooling. △ Less

Submitted 28 December, 2016; originally announced December 2016.

Comments: 16 pp

Report number: Fermilab-Pub-15-524-AD-APC

Accomplishments of the Heavy Electron Particle Accelerator Program

Authors: D. Neuffer, D. Stratakis, M. Palmer, J-P Delahaye, D. Summers, R. Ryne, M. A. Cummings

Abstract: The Muon Accelerator Program (MAP) has completed a four-year study on the feasibility of muon colliders and on using stored muon beams for neutrinos. That study was broadly successful in its goals, establishing the feasibility of heavy lepton colliders (HLCs) from the 125 GeV Higgs Factory to more than 10 TeV, as well as exploring using a μ storage ring (MSR) for neutrinos, and establishing that M… ▽ More The Muon Accelerator Program (MAP) has completed a four-year study on the feasibility of muon colliders and on using stored muon beams for neutrinos. That study was broadly successful in its goals, establishing the feasibility of heavy lepton colliders (HLCs) from the 125 GeV Higgs Factory to more than 10 TeV, as well as exploring using a μ storage ring (MSR) for neutrinos, and establishing that MSRs could provide factory-level intensities of $ν_e (\barν_e)$ and $\barν_μ$ $(ν_μ)$ beams. The key components of the collider and neutrino factory systems were identified. Feasible designs and detailed simulations of all of these components have been obtained, including some initial hardware component tests, setting the stage for future implementation where resources are available and the precise physics goals become apparent. △ Less

Submitted 22 December, 2016; originally announced December 2016.

Comments: 4 pp

Report number: Fermilab-Conf-16-457-AD-APC

Wedge Absorbers For Muon Cooling With a Test Beam At MICE

Authors: David Neuffer, J. Acosta, D. Summers, T. Mohayai, P. Snopok

Abstract: Emittance exchange mediated by wedge absorbers is required for longitudinal ionization cooling and for final transverse emittance minimization for a muon collider. A wedge absorber within the MICE beam line could serve as a demonstration of the type of emittance exchange needed for 6-D cooling, including the configurations needed for muon colliders. Parameters for this test are explored in simulat… ▽ More Emittance exchange mediated by wedge absorbers is required for longitudinal ionization cooling and for final transverse emittance minimization for a muon collider. A wedge absorber within the MICE beam line could serve as a demonstration of the type of emittance exchange needed for 6-D cooling, including the configurations needed for muon colliders. Parameters for this test are explored in simulation and possible experimental configurations with simulated results are presented. △ Less

Submitted 21 December, 2016; originally announced December 2016.

Comments: 3 pp

Report number: FERMILAB-CONF-16-459-AD-APC

MuSim, a graphical user interface for multiple simulation programs

Authors: Thomas J. Roberts, Mary Anne Clare Cummings, Rolland Paul Johnson, David Vincent Neuffer

Abstract: MuSim is a new user-friendly program designed to interface to many different particle simulation codes, regardless of their data formats or geometry descriptions. It presents the user with a compelling graphical user interface that includes a flexible 3-D view of the simulated world plus powerful editing and drag-and-drop capabilities. All aspects of the design can be parameterized so that paramet… ▽ More MuSim is a new user-friendly program designed to interface to many different particle simulation codes, regardless of their data formats or geometry descriptions. It presents the user with a compelling graphical user interface that includes a flexible 3-D view of the simulated world plus powerful editing and drag-and-drop capabilities. All aspects of the design can be parameterized so that parameter scans and optimizations are easy. It is simple to create plots and display events in the 3-D viewer (with a slider to vary the transparency of solids), allowing for an effortless comparison of different simulation codes. Simulation codes: G4beamline 3.02 and MCNP 6.1; more are coming. Many accelerator design tools and beam optics codes were written long ago, with primitive user interfaces by today's standards. MuSim is specifically designed to make it easy to interface to such codes, providing a common user experience for all, and permitting the construction and exploration of models with very little overhead. For today's technology-driven students, graphical interfaces meet their expectations far better than text based tools, and education in accelerator physics is one of our primary goals. △ Less

Submitted 1 July, 2016; originally announced July 2016.

Comments: 3 pp

Report number: Fermilab-Conf-16-187-AD-APC

Phase rotation of muon beams for producing intense low-energy muon beams

Authors: D. Neuffer, Y. Bao, G. Hansen

Abstract: Low-energy muon beams are useful for rare decay searches, which provide access to new physics that cannot be addressed at high-energy colliders. However, muons are produced within a broad energy spread unmatched to the low-energy required. In this paper we outline a phase rotation method to significantly increase the intensity of low-energy muons. The muons are produced from a short pulsed proton… ▽ More Low-energy muon beams are useful for rare decay searches, which provide access to new physics that cannot be addressed at high-energy colliders. However, muons are produced within a broad energy spread unmatched to the low-energy required. In this paper we outline a phase rotation method to significantly increase the intensity of low-energy muons. The muons are produced from a short pulsed proton driver, and develop a time-momentum correlation in a drift space following production. A series of rf cavities is used to bunch the muons and phase-energy rotate the bunches to a momentum of around 100 MeV/c. Then another group of rf cavities is used to decelerate the muon bunches to low-energy. This obtains ~0.1 muon per 8 GeV proton, which is significantly higher than currently planned Mu2e experiments, and would enable a next generation of rare decay searches, and other intense muon beam applications. △ Less

Submitted 30 June, 2016; originally announced July 2016.

Comments: 3 pp

Report number: Fermilab-Conf-16-135-AD-APC

Pion contamination in the MICE muon beam

Authors: D. Adams, A. Alekou, M. Apollonio, R. Asfandiyarov, G. Barber, P. Barclay, A. de Bari, R. Bayes, V. Bayliss, R. Bertoni, V. J. Blackmore, A. Blondel, S. Blot, M. Bogomilov, M. Bonesini, C. N. Booth, D. Bowring, S. Boyd, T. W. Bradshaw, U. Bravar, A. D. Bross, M. Capponi, T. Carlisle, G. Cecchet, C. Charnley , et al. (120 additional authors not shown)

Abstract: The international Muon Ionization Cooling Experiment (MICE) will perform a systematic investigation of ionization cooling with muon beams of momentum between 140 and 240\,MeV/c at the Rutherford Appleton Laboratory ISIS facility. The measurement of ionization cooling in MICE relies on the selection of a pure sample of muons that traverse the experiment. To make this selection, the MICE Muon Beam i… ▽ More The international Muon Ionization Cooling Experiment (MICE) will perform a systematic investigation of ionization cooling with muon beams of momentum between 140 and 240\,MeV/c at the Rutherford Appleton Laboratory ISIS facility. The measurement of ionization cooling in MICE relies on the selection of a pure sample of muons that traverse the experiment. To make this selection, the MICE Muon Beam is designed to deliver a beam of muons with less than $\sim$1\% contamination. To make the final muon selection, MICE employs a particle-identification (PID) system upstream and downstream of the cooling cell. The PID system includes time-of-flight hodoscopes, threshold-Cherenkov counters and calorimetry. The upper limit for the pion contamination measured in this paper is $f_π< 1.4\%$ at 90\% C.L., including systematic uncertainties. Therefore, the MICE Muon Beam is able to meet the stringent pion-contamination requirements of the study of ionization cooling. △ Less

Submitted 10 February, 2016; v1 submitted 2 November, 2015; originally announced November 2015.

Comments: 16 pages, 7 figures

Report number: RAL-P-2015-009

Journal ref: JINST 11 (2016) 03, P03002

Electron-Muon Ranger: performance in the MICE Muon Beam

Authors: D. Adams, A. Alekou, M. Apollonio, R. Asfandiyarov, G. Barber, P. Barclay, A. de Bari, R. Bayes, V. Bayliss, P. Bene, R. Bertoni, V. J. Blackmore, A. Blondel, S. Blot, M. Bogomilov, M. Bonesini, C. N. Booth, D. Bowring, S. Boyd, T. W. Bradshaw, U. Bravar, A. D. Bross, F. Cadoux, M. Capponi, T. Carlisle , et al. (129 additional authors not shown)

Abstract: The Muon Ionization Cooling Experiment (MICE) will perform a detailed study of ionization cooling to evaluate the feasibility of the technique. To carry out this program, MICE requires an efficient particle-identification (PID) system to identify muons. The Electron-Muon Ranger (EMR) is a fully-active tracking-calorimeter that forms part of the PID system and tags muons that traverse the cooling c… ▽ More The Muon Ionization Cooling Experiment (MICE) will perform a detailed study of ionization cooling to evaluate the feasibility of the technique. To carry out this program, MICE requires an efficient particle-identification (PID) system to identify muons. The Electron-Muon Ranger (EMR) is a fully-active tracking-calorimeter that forms part of the PID system and tags muons that traverse the cooling channel without decaying. The detector is capable of identifying electrons with an efficiency of 98.6%, providing a purity for the MICE beam that exceeds 99.8%. The EMR also proved to be a powerful tool for the reconstruction of muon momenta in the range 100-280 MeV/$c$. △ Less

Submitted 3 November, 2015; v1 submitted 28 October, 2015; originally announced October 2015.

Comments: 22 pages, 19 figures

Report number: RAL-P-2015-008

Final Muon Emittance Exchange in Vacuum for a Collider

Authors: Don Summers, John Acosta, Lucien Cremaldi, Terry Hart, Sandra Oliveros, Lalith Perera, Wanwei Wu, David Neuffer

Abstract: We outline a plan for final muon ionization cooling with quadrupole doublets focusing onto short absorbers followed by emittance exchange in vacuum to achieve the small transverse beam sizes needed by a muon collider. A flat muon beam with a series of quadrupole doublet half cells appears to provide the strong focusing required for final cooling. Each quadrupole doublet has a low beta region occup… ▽ More We outline a plan for final muon ionization cooling with quadrupole doublets focusing onto short absorbers followed by emittance exchange in vacuum to achieve the small transverse beam sizes needed by a muon collider. A flat muon beam with a series of quadrupole doublet half cells appears to provide the strong focusing required for final cooling. Each quadrupole doublet has a low beta region occupied by a dense, low Z absorber. After final cooling, normalized xyz emittances of (0.071, 0.141, 2.4) mm-rad are exchanged into (0.025, 0.025, 70) mm-rad. Thin electrostatic septa efficiently slice the bunch into 17 parts. The 17 bunches are interleaved into a 3.7 meter long train with RF deflector cavities. Snap bunch coalescence combines the muon bunch train longitudinally in a 21 GeV ring in 55 microseconds, one quarter of a synchrotron oscillation period. A linear long wavelength RF bucket gives each bunch a different energy causing the bunches to drift until they merge into one bunch and can be captured in a short wavelength RF bucket with a 13% muon decay loss and a packing fraction as high as 87%. △ Less

Submitted 7 May, 2015; originally announced May 2015.

Comments: 4 pages, 6 figures, IPAC-2015

Report number: IPAC-2015-TUPWI044

Muon Emittance Exchange with a Potato Slicer

Authors: D. J. Summers, T. L. Hart, J. G. Acosta, L. M. Cremaldi, S. J. Oliveros, L. P. Perera, D. V. Neuffer

Abstract: We propose a novel scheme for final muon ionization cooling with quadrupole doublets followed by emittance exchange in vacuum to achieve the small beam sizes needed by a muon collider. A flat muon beam with a series of quadrupole doublet half cells appears to provide the strong focusing required for final cooling. Each quadrupole doublet has a low beta region occupied by a dense, low Z absorber. A… ▽ More We propose a novel scheme for final muon ionization cooling with quadrupole doublets followed by emittance exchange in vacuum to achieve the small beam sizes needed by a muon collider. A flat muon beam with a series of quadrupole doublet half cells appears to provide the strong focusing required for final cooling. Each quadrupole doublet has a low beta region occupied by a dense, low Z absorber. After final cooling, normalized transverse, longitudinal, and angular momentum emittances of 0.100, 2.5, and 0.200 mm-rad are exchanged into 0.025, 70, and 0.0 mm-rad. A skew quadrupole triplet transforms a round muon bunch with modest angular momentum into a flat bunch with no angular momentum. Thin electrostatic septa efficiently slice the flat bunch into 17 parts. The 17 bunches are interleaved into a 3.7 meter long train with RF deflector cavities. Snap bunch coalescence combines the muon bunch train longitudinally in a 21 GeV ring in 55 microseconds, one quarter of a synchrotron oscillation period. A linear long wavelength RF bucket gives each bunch a different energy causing the bunches to drift in the ring until they merge into one bunch and can be captured in a short wavelength RF bucket with a 13% muon decay loss and a packing fraction as high as 87%. △ Less

Submitted 15 April, 2015; originally announced April 2015.

Comments: 13 pages, 7 figures

Report number: MAP-DOC-4405

Compact Muon Production and Collection Scheme for High-Energy Physics Experiments

Authors: Diktys Stratakis, David V. Neuffer

Abstract: The relative immunity of muons to synchrotron radiation suggests that they might be used in place of electrons as probes in fundamental high-energy physics experiments. Muons are commonly produced indirectly through pion decay by interaction of a charged particle beam with a target. However, the large angle and energy dispersion of the initial beams as well as the short muon lifetime limits many p… ▽ More The relative immunity of muons to synchrotron radiation suggests that they might be used in place of electrons as probes in fundamental high-energy physics experiments. Muons are commonly produced indirectly through pion decay by interaction of a charged particle beam with a target. However, the large angle and energy dispersion of the initial beams as well as the short muon lifetime limits many potential applications. Here, we describe a fast method for manipulating the longitudinal and transverse phase-space of a divergent pion-muon beam to enable efficient capture and downstream transport with minimum losses. We also discuss the design of a handling system for the removal of unwanted secondary particles from the target region and thus reduce activation of the machine. The compact muon source we describe can be used for fundamental physics research in neutrino experiments. △ Less

Submitted 1 April, 2015; originally announced April 2015.

Comments: 27 pp

Report number: Fermilab-PUB-14-557-AD-APC

Journal ref: J.Phys. G41 (2014) 12, 125002

NuSTORM μ Ring -- Design and Injection Optimization

Authors: David Neuffer, Ao Liu, A. Bross

Abstract: The design of the NuSTORM muon production beam line and storage ring is discussed. The facility includes a pion production target station with a pion collection horn and transport into a straight section of a storage ring. π decay within that straight section provides μ's that are stored within the ring for subsequent decay providing precision electron and muon neutrino beams. The ring and transpo… ▽ More The design of the NuSTORM muon production beam line and storage ring is discussed. The facility includes a pion production target station with a pion collection horn and transport into a straight section of a storage ring. π decay within that straight section provides μ's that are stored within the ring for subsequent decay providing precision electron and muon neutrino beams. The ring and transport designs are described and optimized. Genetic Algorithm optimization of the horn and transport into the ring has been performed, providing a significant increase in intensity △ Less

Submitted 12 February, 2015; originally announced February 2015.

Comments: 6 pp. 16th International Workshop on Neutrino Factories and Future Neutrino Beam Facilities 25 -30 August, 2014, University of Glasgow, Scotland

Report number: FERMILAB-CONF-14-462-AD-APC

New Approaches to Final Cooling

Authors: David Neuffer

Abstract: A high-energy muon collider scenario requires a "final cooling" system that reduces transverse emittance by a factor of ~10 while allowing longitudinal emittance increase. The baseline approach has low-energy transverse cooling within high-field solenoids, with strong longitudinal heating. This approach and its recent simulation are discussed. Alternative approaches which more explicitly include e… ▽ More A high-energy muon collider scenario requires a "final cooling" system that reduces transverse emittance by a factor of ~10 while allowing longitudinal emittance increase. The baseline approach has low-energy transverse cooling within high-field solenoids, with strong longitudinal heating. This approach and its recent simulation are discussed. Alternative approaches which more explicitly include emittance exchange are also presented. Round-to-flat beam transform, transverse slicing, and longitudinal bunch coalescence are possible components of the alternative approach. A more explicit understanding of solenoidal cooling beam dynamics is introduced. △ Less

Submitted 9 February, 2015; originally announced February 2015.

Comments: 6 pp

Report number: FERMILAB-CONF-14-393-AD-APC

A muon collider as a Higgs factory

Authors: D. Neuffer, M. Palmer, Y. Alexahin, C. Ankenbrandt, J. P. Delahaye

Abstract: Because muons connect directly to a standard-model Higgs particle in s-channel production, a muon collider would be an ideal device for precision measurement of the mass and width of a Higgs-like particle, and for further exploration of its production and decay properties. Parameters of a high-precision muon collider are presented and the necessary components and performance are described. An impo… ▽ More Because muons connect directly to a standard-model Higgs particle in s-channel production, a muon collider would be an ideal device for precision measurement of the mass and width of a Higgs-like particle, and for further exploration of its production and decay properties. Parameters of a high-precision muon collider are presented and the necessary components and performance are described. An important advantage of the muon collider approach is that the spin precession of the muons will enable energy measurements at extremely high accuracy (dE/E to 10-6 or better). The collider could be a first step toward a high-luminosity multi-TeV lepton collider, and extensions toward a higher-energy higher-luminosity device are also discussed. △ Less

Submitted 6 February, 2015; originally announced February 2015.

Comments: 3 pp

Report number: FERMILAB-CONF-13-140-APC

A Staged Muon Accelerator Facility For Neutrino and Collider Physics

Authors: Jean-Pierre Delahaye, Charles Ankenbrandt, Stephen Brice, Alan David Bross, Dmitri Denisov, Estia Eichten, Stephen Holmes, Ronald Lipton, David Neuffer, Mark Alan Palmer, S. Alex Bogacz, Patrick Huber, Daniel M. Kaplan, Pavel Snopok, Harold G. Kirk, Robert B. Palmer, Robert D. Ryne

Abstract: Muon-based facilities offer unique potential to provide capabilities at both the Intensity Frontier with Neutrino Factories and the Energy Frontier with Muon Colliders. They rely on a novel technology with challenging parameters, for which the feasibility is currently being evaluated by the Muon Accelerator Program (MAP). A realistic scenario for a complementary series of staged facilities with in… ▽ More Muon-based facilities offer unique potential to provide capabilities at both the Intensity Frontier with Neutrino Factories and the Energy Frontier with Muon Colliders. They rely on a novel technology with challenging parameters, for which the feasibility is currently being evaluated by the Muon Accelerator Program (MAP). A realistic scenario for a complementary series of staged facilities with increasing complexity and significant physics potential at each stage has been developed. It takes advantage of and leverages the capabilities already planned for Fermilab, especially the strategy for long-term improvement of the accelerator complex being initiated with the Proton Improvement Plan (PIP-II) and the Long Baseline Neutrino Facility (LBNF). Each stage is designed to provide an R&D platform to validate the technologies required for subsequent stages. The rationale and sequence of the staging process and the critical issues to be addressed at each stage, are presented. △ Less

Submitted 5 February, 2015; originally announced February 2015.

Comments: 5 pp

Report number: FERMILAB-CONF-14-211-APC-E-T

Mu2e Technical Design Report

Authors: L. Bartoszek, E. Barnes, J. P. Miller, J. Mott, A. Palladino, J. Quirk, B. L. Roberts, J. Crnkovic, V. Polychronakos, V. Tishchenko, P. Yamin, C. -h. Cheng, B. Echenard, K. Flood, D. G. Hitlin, J. H. Kim, T. S. Miyashita, F. C. Porter, M. R�hrken, J. Trevor, R. -Y. Zhu, E. Heckmaier, T. I. Kang, G. Lim, W. Molzon , et al. (238 additional authors not shown)

Abstract: The Mu2e experiment at Fermilab will search for charged lepton flavor violation via the coherent conversion process mu- N --> e- N with a sensitivity approximately four orders of magnitude better than the current world's best limits for this process. The experiment's sensitivity offers discovery potential over a wide array of new physics models and probes mass scales well beyond the reach of the L… ▽ More The Mu2e experiment at Fermilab will search for charged lepton flavor violation via the coherent conversion process mu- N --> e- N with a sensitivity approximately four orders of magnitude better than the current world's best limits for this process. The experiment's sensitivity offers discovery potential over a wide array of new physics models and probes mass scales well beyond the reach of the LHC. We describe herein the preliminary design of the proposed Mu2e experiment. This document was created in partial fulfillment of the requirements necessary to obtain DOE CD-2 approval. △ Less

Submitted 16 March, 2015; v1 submitted 21 January, 2015; originally announced January 2015.

Comments: compressed file, 888 pages, 621 figures, 126 tables; full resolution available at http://mu2e.fnal.gov; corrected typo in background summary, Table 3.4

Report number: Fermilab-TM-2594 , Fermilab-DESIGN-2014-1