-
TALOS (Total Automation of LabVIEW Operations for Science): A framework for autonomous control systems for complex experiments
Authors:
M. Volponi,
J. Zieliński,
T. Rauschendorfer,
S. Huck,
R. Caravita,
M. Auzins,
B. Bergmann,
P. Burian,
R. S. Brusa,
A. Camper,
F. Castelli,
G. Cerchiari,
R. Ciuryło,
G. Consolati,
M. Doser,
K. Eliaszuk,
A. Giszczak,
L. T. Glöggler,
Ł. Graczykowski,
M. Grosbart,
F. Guatieri,
N. Gusakova,
F. Gustafsson,
S. Haider,
M. A. Janik
, et al. (30 additional authors not shown)
Abstract:
Modern physics experiments are frequently very complex, relying on multiple simultaneous events to happen in order to obtain the desired result. The experiment control system plays a central role in orchestrating the measurement setup: However, its development is often treated as secondary with respect to the hardware, its importance becoming evident only during the operational phase. Therefore, t…
▽ More
Modern physics experiments are frequently very complex, relying on multiple simultaneous events to happen in order to obtain the desired result. The experiment control system plays a central role in orchestrating the measurement setup: However, its development is often treated as secondary with respect to the hardware, its importance becoming evident only during the operational phase. Therefore, the AEgIS (Antimatter Experiment: Gravity, Interferometry, Spectroscopy) collaboration has created a framework for easily coding control systems, specifically targeting atomic, quantum, and antimatter experiments. This framework, called Total Automation of LabVIEW Operations for Science (TALOS), unifies all the machines of the experiment in a single entity, thus enabling complex high-level decisions to be taken, and it is constituted by separate modules, called MicroServices, that run concurrently and asynchronously. This enhances the stability and reproducibility of the system while allowing for continuous integration and testing while the control system is running. The system demonstrated high stability and reproducibility, running completely unsupervised during the night and weekends of the data-taking campaigns. The results demonstrate the suitability of TALOS to manage an entire physics experiment in full autonomy: being open-source, experiments other than the AEgIS experiment can benefit from it.
△ Less
Submitted 2 September, 2024;
originally announced September 2024.
-
Real-time antiproton annihilation vertexing with sub-micron resolution
Authors:
M. Berghold,
D. Orsucci,
F. Guatieri,
S. Alfaro,
M. Auzins,
B. Bergmann,
P. Burian,
R. S. Brusa,
A. Camper,
R. Caravita,
F. Castelli,
G. Cerchiari,
R. Ciuryło,
A. Chehaimi,
G. Consolati,
M. Doser,
K. Eliaszuk,
R. Ferguson,
M. Germann,
A. Giszczak,
L. T. Glöggler,
Ł. Graczykowski,
M. Grosbart,
F. Guatieri,
N. Gusakova
, et al. (42 additional authors not shown)
Abstract:
The primary goal of the AEgIS experiment is to precisely measure the free fall of antihydrogen within Earth's gravitational field. To this end, a cold ~50K antihydrogen beam has to pass through two grids forming a moiré deflectometer before annihilating onto a position-sensitive detector, which shall determine the vertical position of the annihilation vertex relative to the grids with micrometric…
▽ More
The primary goal of the AEgIS experiment is to precisely measure the free fall of antihydrogen within Earth's gravitational field. To this end, a cold ~50K antihydrogen beam has to pass through two grids forming a moiré deflectometer before annihilating onto a position-sensitive detector, which shall determine the vertical position of the annihilation vertex relative to the grids with micrometric accuracy. Here we introduce a vertexing detector based on a modified mobile camera sensor and experimentally demonstrate that it can measure the position of antiproton annihilations with an accuracy of $0.62^{+0.40}_{-0.22}μm$, which represents a 35-fold improvement over the previous state-of-the-art for real-time antiproton vertexing. Importantly, these antiproton detection methods are directly applicable to antihydrogen. Moreover, the sensitivity to light of the sensor enables the in-situ calibration of the moiré deflectometer, significantly reducing systematic errors. This sensor emerges as a breakthrough technology for achieving the \aegis scientific goals and has been selected as the basis for the development of a large-area detector for conducting antihydrogen gravity measurements.
△ Less
Submitted 23 June, 2024;
originally announced June 2024.
-
CIRCUS: an autonomous control system for antimatter, atomic and quantum physics experiments
Authors:
Marco Volponi,
Saiva Huck,
Ruggero Caravita,
Jakub Zielinski,
Georgy Kornakov,
Grzegorz Kasprowicz,
Dorota Nowicka,
Tassilo Rauschendorfer,
Benjamin Rien�cker,
Francesco Prelz,
Marcis Auzins,
Benedikt Bergmann,
Petr Burian,
Roberto Sennen Brusa,
Antoine Camper,
Fabrizio Castelli,
Roman Ciuryło,
Giovanni Consolati,
Michael Doser,
Lisa Glöggler,
Łukasz Graczykowski,
Malgorzata Grosbart,
Francesco Guatieri,
Nataly Gusakova,
Fredrik Gustafsson
, et al. (27 additional authors not shown)
Abstract:
A powerful and robust control system is a crucial, often neglected, pillar of any modern, complex physics experiment that requires the management of a multitude of different devices and their precise time synchronisation. The AEgIS collaboration presents CIRCUS, a novel, autonomous control system optimised for time-critical experiments such as those at CERN's Antiproton Decelerator and, more broad…
▽ More
A powerful and robust control system is a crucial, often neglected, pillar of any modern, complex physics experiment that requires the management of a multitude of different devices and their precise time synchronisation. The AEgIS collaboration presents CIRCUS, a novel, autonomous control system optimised for time-critical experiments such as those at CERN's Antiproton Decelerator and, more broadly, in atomic and quantum physics research. Its setup is based on Sinara/ARTIQ and TALOS, integrating the ALPACA analysis pipeline, the last two developed entirely in AEgIS. It is suitable for strict synchronicity requirements and repeatable, automated operation of experiments, culminating in autonomous parameter optimisation via feedback from real-time data analysis. CIRCUS has been successfully deployed and tested in AEgIS; being experiment-agnostic and released open-source, other experiments can leverage its capabilities.
△ Less
Submitted 7 February, 2024;
originally announced February 2024.
-
Positronium laser cooling via the $1^3S$-$2^3P$ transition with a broadband laser pulse
Authors:
L. T. Gl�ggler,
N. Gusakova,
B. Rien�cker,
A. Camper,
R. Caravita,
S. Huck,
M. Volponi,
T. Wolz,
L. Penasa,
V. Krumins,
F. Gustafsson,
M. Auzins,
B. Bergmann,
P. Burian,
R. S. Brusa,
F. Castelli,
R. Ciuryło,
D. Comparat,
G. Consolati,
M. Doser,
Ł. Graczykowski,
M. Grosbart,
F. Guatieri,
S. Haider,
M. A. Janik
, et al. (27 additional authors not shown)
Abstract:
We report on laser cooling of a large fraction of positronium (Ps) in free-flight by strongly saturating the $1^3S$-$2^3P$ transition with a broadband, long-pulsed 243 nm alexandrite laser. The ground state Ps cloud is produced in a magnetic and electric field-free environment. We observe two different laser-induced effects. The first effect is an increase in the number of atoms in the ground stat…
▽ More
We report on laser cooling of a large fraction of positronium (Ps) in free-flight by strongly saturating the $1^3S$-$2^3P$ transition with a broadband, long-pulsed 243 nm alexandrite laser. The ground state Ps cloud is produced in a magnetic and electric field-free environment. We observe two different laser-induced effects. The first effect is an increase in the number of atoms in the ground state after the time Ps has spent in the long-lived $3^3P$ states. The second effect is the one-dimensional Doppler cooling of Ps, reducing the cloud's temperature from 380(20) K to 170(20) K. We demonstrate a 58(9) % increase in the coldest fraction of the Ps ensemble.
△ Less
Submitted 12 October, 2023;
originally announced October 2023.
-
A cryogenic tracking detector for antihydrogen detection in the AEgIS experiment
Authors:
C. Amsler,
M. Antonello,
A. Belov,
G. Bonomi,
R. S. Brusa,
M. Caccia,
A. Camper,
R. Caravita,
F. Castelli,
D. Comparat,
G. Consolati,
A. Demetrio,
L. Di Noto,
M. Doser,
P. A. Ekman,
M. Fani,
R. Ferragut,
S. Gerber,
M. Giammarchi,
A. Gligorova,
F. Guatieri,
P. Hackstock,
D. Haider,
S. Haider,
A. Hinterberger
, et al. (33 additional authors not shown)
Abstract:
We present the commissioning of the Fast Annihilation Cryogenic Tracker detector (FACT), installed around the antihydrogen production trap inside the 1 T superconducting magnet of the AEgIS experiment. FACT is designed to detect pions originating from the annihilation of antiprotons. Its 794 scintillating fibers operate at 4 K and are read out by silicon photomultipliers (MPPCs) at near room tempe…
▽ More
We present the commissioning of the Fast Annihilation Cryogenic Tracker detector (FACT), installed around the antihydrogen production trap inside the 1 T superconducting magnet of the AEgIS experiment. FACT is designed to detect pions originating from the annihilation of antiprotons. Its 794 scintillating fibers operate at 4 K and are read out by silicon photomultipliers (MPPCs) at near room temperature. FACT provides the antiproton/antihydrogen annihilation position information with a few ns timing resolution. We present the hardware and software developments which led to the successful operation of the detector for antihydrogen detection and the results of an antiproton-loss based efficiency assessment. The main background to the antihydrogen signal is that of the positrons impinging onto the positronium conversion target and creating a large amount of gamma rays which produce a sizeable signal in the MPPCs shortly before the antihydrogen signal is expected. We detail the characterization of this background signal and its impact on the antihydrogen detection efficiency.
△ Less
Submitted 6 March, 2022;
originally announced March 2022.
-
Radiation Hard 3D Silicon Pixel Sensors for use in the ATLAS Detector at the HL-LHC
Authors:
Andreas L�kken Heggelund,
Simon Huiberts,
Ole Dorholt,
Alexander Lincoln Read,
Ole R�hne,
Heidi Sandaker,
Magne Lauritzen,
Bjarne Stugu,
Angela Kok,
Ozhan Koybasi,
Marco Povoli,
Marco Bomben,
J�rn Lange,
Andre Rummler
Abstract:
The High Luminosity LHC (HL-LHC) upgrade requires the planned Inner Tracker (ITk) of the ATLAS detector to tolerate extremely high radiation doses. Specifically, the innermost parts of the pixel system will have to withstand radiation fluences above $1\times10^{16}$ $n_{eq}cm^{-2}$. Novel 3D silicon pixel sensors offer a superior radiation tolerance compared to conventional planar pixel sensors, a…
▽ More
The High Luminosity LHC (HL-LHC) upgrade requires the planned Inner Tracker (ITk) of the ATLAS detector to tolerate extremely high radiation doses. Specifically, the innermost parts of the pixel system will have to withstand radiation fluences above $1\times10^{16}$ $n_{eq}cm^{-2}$. Novel 3D silicon pixel sensors offer a superior radiation tolerance compared to conventional planar pixel sensors, and are thus excellent candidates for the innermost parts of the ITk. This paper presents studies of 3D pixel sensors with pixel size $50 \times 50$ $μm^2$ mounted on the RD53A prototype readout chip. Following a description of the design and fabrication steps, Test Beam results are presented for unirradiated as well as heavily irradiated sensors. For particles passing at perpendicular incidence, it is shown that average efficiencies above 96% are reached for sensors exposed to fluences of $1\times10^{16}$ $n_{eq}cm^{-2}$ when biased to 80 $V$.
△ Less
Submitted 21 February, 2022;
originally announced February 2022.
-
Rydberg-positronium velocity and self-ionization studies in 1T magnetic field and cryogenic environment
Authors:
M. Antonello,
A. Belov,
G. Bonomi R. S. Brusa,
M. Caccia,
A. Camper,
R. Caravita,
F. Castelli,
D. Comparat,
G. Consolati,
L. Di Noto,
M. Doser,
M. Fani,
R. Ferragut,
J. Fesel,
S. Gerber,
A. Gligorova,
L. T. Gl�ggler,
F. Guatieri,
S. Haider,
A. Hinterberger,
O. Khalidova,
D. Krasnicky,
V. Lagomarsino,
C. Malbrunot,
S. Mariazzi
, et al. (21 additional authors not shown)
Abstract:
We characterized the pulsed Rydberg-positronium production inside the AEgIS (Antimatter Experiment: Gravity, Interferometry, Spectroscopy) apparatus in view of antihydrogen formation by means of a charge exchange reaction between cold antiprotons and slow Rydberg-positronium atoms. Velocity measurements on positronium along two axes in a cryogenic environment (10K) and in 1T magnetic field were pe…
▽ More
We characterized the pulsed Rydberg-positronium production inside the AEgIS (Antimatter Experiment: Gravity, Interferometry, Spectroscopy) apparatus in view of antihydrogen formation by means of a charge exchange reaction between cold antiprotons and slow Rydberg-positronium atoms. Velocity measurements on positronium along two axes in a cryogenic environment (10K) and in 1T magnetic field were performed. The velocimetry was done by MCP-imaging of photoionized positronium previously excited to the $n=3$ state. One direction of velocity was measured via Doppler-scan of this $n=3$-line, another direction perpendicular to the former by delaying the exciting laser pulses in a time-of-flight measurement. Self-ionization in the magnetic field due to motional Stark effect was also quantified by using the same MCP-imaging technique for Rydberg positronium with an effective principal quantum number $n_{eff}$ ranging between 14 and 22. We conclude with a discussion about the optimization of our experimental parameters for creating Rydberg-positronium in preparation for an efficient pulsed production of antihydrogen.
△ Less
Submitted 22 February, 2022; v1 submitted 11 November, 2019;
originally announced November 2019.
-
Efficient $2^3S$ positronium production by stimulated decay from the $3^3P$ level
Authors:
M. Antonello,
A. Belov,
G. Bonomi,
R. S. Brusa,
M. Caccia,
A. Camper,
R. Caravita,
F. Castelli,
G. Cerchiari,
D. Comparat,
G. Consolati,
A. Demetrio,
L. Di Noto,
M. Doser,
M. Fan�,
S. Gerber,
A. Gligorova,
F. Guatieri,
P. Hackstock,
S. Haider,
A. Hinterberger,
A. Kellerbauer,
O. Khalidova,
D. Krasnicky,
V. Lagomarsino
, et al. (26 additional authors not shown)
Abstract:
We investigate experimentally the possibility of enhancing the production of $2^3S$ positronium atoms by driving the $1^3S$-$3^3P$ and $3^3P$-$2^3S$ transitions, overcoming the natural branching ratio limitation of spontaneous decay from $3^3P$ to $2^3S$. The decay of $3^3P$ positronium atoms towards the $2^3S$ level has been effciently stimulated by a 1312.2nm broadband IR laser pulse. The depend…
▽ More
We investigate experimentally the possibility of enhancing the production of $2^3S$ positronium atoms by driving the $1^3S$-$3^3P$ and $3^3P$-$2^3S$ transitions, overcoming the natural branching ratio limitation of spontaneous decay from $3^3P$ to $2^3S$. The decay of $3^3P$ positronium atoms towards the $2^3S$ level has been effciently stimulated by a 1312.2nm broadband IR laser pulse. The dependence of the stimulating transition efficiency on the intensity of the IR pulse has been measured to find the optimal enhancement conditions. A maximum relative increase of $ \times (3.1 \pm 1.0) $ in the $2^3S$ production efficiency, with respect to the case where only spontaneous decay is present, was obtained.
△ Less
Submitted 18 April, 2019;
originally announced April 2019.
-
Velocity selected production of $2^3S$ metastable positronium
Authors:
C. Amsler,
M. Antonello,
A. Belov,
G. Bonomi,
R. S. Brusa,
M. Caccia,
A. Camper,
R. Caravita,
F. Castelli,
G. Cerchiari,
D. Comparat,
G. Consolati,
A. Demetrio,
L. Di Noto,
M. Doser,
M. Fan�,
S. Gerber,
A. Gligorova,
F. Guatieri,
P. Hackstock,
S. Haider,
A. Hinterberger,
H. Holmestad,
A. Kellerbauer,
O. Khalidova
, et al. (30 additional authors not shown)
Abstract:
Positronium in the $2^3S$ metastable state exhibits a low electrical polarizability and a long lifetime (1140 ns) making it a promising candidate for interferometry experiments with a neutral matter-antimatter system. In the present work, $2^3S$ positronium is produced - in absence of electric field - via spontaneous radiative decay from the $3^3P$ level populated with a 205nm UV laser pulse. Than…
▽ More
Positronium in the $2^3S$ metastable state exhibits a low electrical polarizability and a long lifetime (1140 ns) making it a promising candidate for interferometry experiments with a neutral matter-antimatter system. In the present work, $2^3S$ positronium is produced - in absence of electric field - via spontaneous radiative decay from the $3^3P$ level populated with a 205nm UV laser pulse. Thanks to the short temporal length of the pulse, 1.5 ns full-width at half maximum, different velocity populations of a positronium cloud emitted from a nanochannelled positron/positronium converter were selected by delaying the excitation pulse with respect to the production instant. $ 2^3S $ positronium atoms with velocity tuned between $ 7 \cdot 10^4 $ m/s and $ 10 \cdot 10^4 $ m/s were thus produced. Depending on the selected velocity, a $2^3S$ production effciency ranging from $\sim 0.8 \%$ to $\sim 1.7%$, with respect to the total amount of emitted positronium, was obtained. The observed results give a branching ratio for the $3^3P$-$2^3S$ spontaneous decay of $(9.7 \pm 2.7) \% $. The present velocity selection technique could allow to produce an almost monochromatic beam of $\sim 1 \cdot 10^3 $ $2^3S$ atoms with a velocity spread $ < 10^4 $ m/s and an angular divergence of $\sim$ 50 mrad.
△ Less
Submitted 18 April, 2019; v1 submitted 6 August, 2018;
originally announced August 2018.
-
Beam tests of silicon pixel 3D-sensors developed at SINTEF
Authors:
Ole Dorholt,
Thor-Erik Hansen,
Andreas Heggelund,
Angela Kok,
Nicola Pacifico,
Ole Rohne,
Heidi Sandaker,
Bjarne Stugu,
Zongchang Yang,
Marco Bomben,
Andre Rummler,
Jens Weingarten
Abstract:
For the purpose of withstanding very high radiation doses, silicon pixel sensors with a 3D electrode geometry are being developed. Detectors of this kind are highly interesting for harch radiation environments such as expected in the High Luminosity LHC, but also for space physics and medical applications. In this paper, prototype sensors developed at SINTEF are presented and results from tests in…
▽ More
For the purpose of withstanding very high radiation doses, silicon pixel sensors with a 3D electrode geometry are being developed. Detectors of this kind are highly interesting for harch radiation environments such as expected in the High Luminosity LHC, but also for space physics and medical applications. In this paper, prototype sensors developed at SINTEF are presented and results from tests in a pion beam at CERN are given. These tests shows that these 3D sensors perform as expected with full efficiency at bias voltages between 5 and 15V.
△ Less
Submitted 5 August, 2018; v1 submitted 21 June, 2018;
originally announced June 2018.
-
Production and Integration of the ATLAS Insertable B-Layer
Authors:
B. Abbott,
J. Albert,
F. Alberti,
M. Alex,
G. Alimonti,
S. Alkire,
P. Allport,
S. Altenheiner,
L. Ancu,
E. Anderssen,
A. Andreani,
A. Andreazza,
B. Axen,
J. Arguin,
M. Backhaus,
G. Balbi,
J. Ballansat,
M. Barbero,
G. Barbier,
A. Bassalat,
R. Bates,
P. Baudin,
M. Battaglia,
T. Beau,
R. Beccherle
, et al. (352 additional authors not shown)
Abstract:
During the shutdown of the CERN Large Hadron Collider in 2013-2014, an additional pixel layer was installed between the existing Pixel detector of the ATLAS experiment and a new, smaller radius beam pipe. The motivation for this new pixel layer, the Insertable B-Layer (IBL), was to maintain or improve the robustness and performance of the ATLAS tracking system, given the higher instantaneous and i…
▽ More
During the shutdown of the CERN Large Hadron Collider in 2013-2014, an additional pixel layer was installed between the existing Pixel detector of the ATLAS experiment and a new, smaller radius beam pipe. The motivation for this new pixel layer, the Insertable B-Layer (IBL), was to maintain or improve the robustness and performance of the ATLAS tracking system, given the higher instantaneous and integrated luminosities realised following the shutdown. Because of the extreme radiation and collision rate environment, several new radiation-tolerant sensor and electronic technologies were utilised for this layer. This paper reports on the IBL construction and integration prior to its operation in the ATLAS detector.
△ Less
Submitted 6 June, 2018; v1 submitted 2 March, 2018;
originally announced March 2018.
-
Producing long-lived $2^3\text{S}$ Ps via $3^3\text{P}$ laser excitation in magnetic and electric fields
Authors:
S. Aghion,
C. Amsler,
M. Antonello,
A. Belov,
G. Bonomi,
R. S. Brusa,
M. Caccia,
A. Camper,
R. Caravita,
F. Castelli,
G. Cerchiari,
D. Comparat,
G. Consolati,
A. Demetrio,
L. Di Noto,
M. Doser,
C. Evans,
M. Fani,
R. Ferragut,
J. Fesel,
A. Fontana,
S. Gerber,
M. Giammarchi,
A. Gligorova,
F. Guatieri
, et al. (40 additional authors not shown)
Abstract:
Producing positronium (Ps) in the metastable $2^3\text{S}$ state is of interest for various applications in fundamental physics. We report here about an experiment in which Ps atoms are produced in this long-lived state by spontaneous radiative decay of Ps excited to the $3^3\text{P}$ level manifold. The Ps cloud excitation is obtained with a UV laser pulse in an experimental vacuum chamber in pre…
▽ More
Producing positronium (Ps) in the metastable $2^3\text{S}$ state is of interest for various applications in fundamental physics. We report here about an experiment in which Ps atoms are produced in this long-lived state by spontaneous radiative decay of Ps excited to the $3^3\text{P}$ level manifold. The Ps cloud excitation is obtained with a UV laser pulse in an experimental vacuum chamber in presence of guiding magnetic field of 25 mT and an average electric field of 300 V/cm. The indication of the $2^3\text{S}$ state production is obtained from a novel analysis technique of single-shot positronium annihilation lifetime spectra. Its production efficiency relative to the total amount of formed Ps is evaluated by fitting a simple rate equations model to the experimental data and found to be $ (2.1 \pm 1.3) \, \% $.
△ Less
Submitted 20 February, 2018;
originally announced February 2018.
-
Measurement of antiproton annihilation on Cu, Ag and Au with emulsion films
Authors:
S. Aghion,
C. Amsler,
A. Ariga,
T. Ariga,
G. Bonomi,
P. Braunig,
R. S. Brusa,
L. Cabaret,
M. Caccia,
R. Caravita,
F. Castelli,
G. Cerchiari,
D. Comparat,
G. Consolati,
A. Demetrio,
L. Di Noto,
M. Doser,
A. Ereditato,
C. Evans,
R. Ferragut,
J. Fesel,
A. Fontana,
S. Gerber,
M. Giammarchi,
A. Gligorova
, et al. (47 additional authors not shown)
Abstract:
The characteristics of low energy antiproton annihilations on nuclei (e.g. hadronization and product multiplicities) are not well known, and Monte Carlo simulation packages that use different models provide different descriptions of the annihilation events. In this study, we measured the particle multiplicities resulting from antiproton annihilations on nuclei. The results were compared with predi…
▽ More
The characteristics of low energy antiproton annihilations on nuclei (e.g. hadronization and product multiplicities) are not well known, and Monte Carlo simulation packages that use different models provide different descriptions of the annihilation events. In this study, we measured the particle multiplicities resulting from antiproton annihilations on nuclei. The results were compared with predictions obtained using different models in the simulation tools GEANT4 and FLUKA. For this study, we exposed thin targets (Cu, Ag and Au) to a very low energy antiproton beam from CERN's Antiproton Decelerator, exploiting the secondary beamline available in the AEgIS experimental zone. The antiproton annihilation products were detected using emulsion films developed at the Laboratory of High Energy Physics in Bern, where they were analysed at the automatic microscope facility. The fragment multiplicity measured in this study is in good agreement with results obtained with FLUKA simulations for both minimally and heavily ionizing particles.
△ Less
Submitted 23 April, 2017; v1 submitted 23 January, 2017;
originally announced January 2017.
-
Module production of the one-arm AFP 3D pixel tracker
Authors:
S. Grinstein,
E. Cavallaro,
M. Chmeissani,
O. Dorholt,
F. Foerster,
J. Lange,
I. Lopez Paz,
M. Manna,
G. Pellegrini,
D. Quirion,
M. Rijssenbeek,
O. Rohne,
B. Stugu
Abstract:
The ATLAS Forward Proton (AFP) detector is designed to identify events in which one or two protons emerge intact from the LHC collisions. AFP will consist of a tracking detector, to measure the momentum of the protons, and a time of flight system to reduce the background from multiple proton-proton interactions. Following an extensive qualification period, 3D silicon pixel sensors were selected fo…
▽ More
The ATLAS Forward Proton (AFP) detector is designed to identify events in which one or two protons emerge intact from the LHC collisions. AFP will consist of a tracking detector, to measure the momentum of the protons, and a time of flight system to reduce the background from multiple proton-proton interactions. Following an extensive qualification period, 3D silicon pixel sensors were selected for the AFP tracker. The sensors were produced at CNM (Barcelona) during 2014. The tracker module assembly and quality control was performed at IFAE during 2015. The assembly of the first AFP arm and the following installation in the LHC tunnel took place in February 2016. This paper reviews the fabrication process of the AFP tracker focusing on the pixel modules.
△ Less
Submitted 19 December, 2016; v1 submitted 3 November, 2016;
originally announced November 2016.
-
Annihilation of low energy antiprotons in silicon
Authors:
S. Aghion,
O. Ahl�n,
A. S. Belov,
G. Bonomi,
P. Br�unig,
J. Bremer,
R. S. Brusa,
G. Burghart,
L. Cabaret,
M. Caccia,
C. Canali,
R. Caravita,
F. Castelli,
G. Cerchiari,
S. Cialdi,
D. Comparat,
G. Consolati,
J. H. Derking,
S. Di Domizio,
L. Di Noto,
M. Doser,
A. Dudarev,
R. Ferragut,
A. Fontana,
P. Genova
, et al. (34 additional authors not shown)
Abstract:
The goal of the AE$\mathrm{\bar{g}}$IS experiment at the Antiproton Decelerator (AD) at CERN, is to measure directly the Earth's gravitational acceleration on antimatter. To achieve this goal, the AE$\mathrm{\bar{g}}$IS collaboration will produce a pulsed, cold (100 mK) antihydrogen beam with a velocity of a few 100 m/s and measure the magnitude of the vertical deflection of the beam from a straig…
▽ More
The goal of the AE$\mathrm{\bar{g}}$IS experiment at the Antiproton Decelerator (AD) at CERN, is to measure directly the Earth's gravitational acceleration on antimatter. To achieve this goal, the AE$\mathrm{\bar{g}}$IS collaboration will produce a pulsed, cold (100 mK) antihydrogen beam with a velocity of a few 100 m/s and measure the magnitude of the vertical deflection of the beam from a straight path. The final position of the falling antihydrogen will be detected by a position sensitive detector. This detector will consist of an active silicon part, where the annihilations take place, followed by an emulsion part. Together, they allow to achieve 1$%$ precision on the measurement of $\bar{g}$ with about 600 reconstructed and time tagged annihilations.
We present here, to the best of our knowledge, the first direct measurement of antiproton annihilation in a segmented silicon sensor, the first step towards designing a position sensitive silicon detector for the AE$\mathrm{\bar{g}}$IS experiment. We also present a first comparison with Monte Carlo simulations (GEANT4) for antiproton energies below 5 MeV
△ Less
Submitted 11 March, 2014; v1 submitted 20 November, 2013;
originally announced November 2013.
-
Prospects for measuring the gravitational free-fall of antihydrogen with emulsion detectors
Authors:
AEgIS Collaboration,
S. Aghion,
O. Ahl�n,
C. Amsler,
A. Ariga,
T. Ariga,
A. S. Belov,
G. Bonomi,
P. Br�unig,
J. Bremer,
R. S. Brusa,
L. Cabaret,
C. Canali,
R. Caravita,
F. Castelli,
G. Cerchiari,
S. Cialdi,
D. Comparat,
G. Consolati,
J. H. Derking,
S. Di Domizio,
L. Di Noto,
M. Doser,
A. Dudarev,
A. Ereditato
, et al. (46 additional authors not shown)
Abstract:
The main goal of the AEgIS experiment at CERN is to test the weak equivalence principle for antimatter. AEgIS will measure the free-fall of an antihydrogen beam traversing a moir� deflectometer. The goal is to determine the gravitational acceleration g for antihydrogen with an initial relative accuracy of 1% by using an emulsion detector combined with a silicon micro-strip detector to measure the…
▽ More
The main goal of the AEgIS experiment at CERN is to test the weak equivalence principle for antimatter. AEgIS will measure the free-fall of an antihydrogen beam traversing a moir� deflectometer. The goal is to determine the gravitational acceleration g for antihydrogen with an initial relative accuracy of 1% by using an emulsion detector combined with a silicon micro-strip detector to measure the time of flight. Nuclear emulsions can measure the annihilation vertex of antihydrogen atoms with a precision of about 1 - 2 microns r.m.s. We present here results for emulsion detectors operated in vacuum using low energy antiprotons from the CERN antiproton decelerator. We compare with Monte Carlo simulations, and discuss the impact on the AEgIS project.
△ Less
Submitted 24 June, 2013;
originally announced June 2013.
-
Test Beam Results of 3D Silicon Pixel Sensors for the ATLAS upgrade
Authors:
ATLAS 3D Collaboration,
P. Grenier,
G. Alimonti,
M. Barbero,
R. Bates,
E. Bolle,
M. Borri,
M. Boscardin,
C. Buttar,
M. Capua,
M. Cavalli-Sforza,
M. Cobal,
A. Cristofoli,
G-F. Dalla Betta,
G. Darbo,
C. Da Vi�,
E. Devetak,
B. DeWilde,
B. Di Girolamo,
D. Dobos,
K. Einsweiler,
D. Esseni,
S. Fazio,
C. Fleta,
J. Freestone
, et al. (68 additional authors not shown)
Abstract:
Results on beam tests of 3D silicon pixel sensors aimed at the ATLAS Insertable-B-Layer and High Luminosity LHC (HL-LHC)) upgrades are presented. Measurements include charge collection, tracking efficiency and charge sharing between pixel cells, as a function of track incident angle, and were performed with and without a 1.6 T magnetic field oriented as the ATLAS Inner Detector solenoid field. Sen…
▽ More
Results on beam tests of 3D silicon pixel sensors aimed at the ATLAS Insertable-B-Layer and High Luminosity LHC (HL-LHC)) upgrades are presented. Measurements include charge collection, tracking efficiency and charge sharing between pixel cells, as a function of track incident angle, and were performed with and without a 1.6 T magnetic field oriented as the ATLAS Inner Detector solenoid field. Sensors were bump bonded to the front-end chip currently used in the ATLAS pixel detector. Full 3D sensors, with electrodes penetrating through the entire wafer thickness and active edge, and double-sided 3D sensors with partially overlapping bias and read-out electrodes were tested and showed comparable performance.
△ Less
Submitted 21 January, 2011;
originally announced January 2011.
-
A Layer Correlation technique for pion energy calibration at the 2004 ATLAS Combined Beam Test
Authors:
E. Abat,
J. M. Abdallah,
T. N. Addy,
P. Adragna,
M. Aharrouche,
A. Ahmad,
T. P. A. Akesson,
M. Aleksa,
C. Alexa,
K. Anderson,
A. Andreazza,
F. Anghinolfi,
A. Antonaki,
G. Arabidze,
E. Arik,
T. Atkinson,
J. Baines,
O. K. Baker,
D. Banfi,
S. Baron,
A. J. Barr,
R. Beccherle,
H. P. Beck,
B. Belhorma,
P. J. Bell
, et al. (460 additional authors not shown)
Abstract:
A new method for calibrating the hadron response of a segmented calorimeter is developed and successfully applied to beam test data. It is based on a principal component analysis of energy deposits in the calorimeter layers, exploiting longitudinal shower development information to improve the measured energy resolution. Corrections for invisible hadronic energy and energy lost in dead material in…
▽ More
A new method for calibrating the hadron response of a segmented calorimeter is developed and successfully applied to beam test data. It is based on a principal component analysis of energy deposits in the calorimeter layers, exploiting longitudinal shower development information to improve the measured energy resolution. Corrections for invisible hadronic energy and energy lost in dead material in front of and between the calorimeters of the ATLAS experiment were calculated with simulated Geant4 Monte Carlo events and used to reconstruct the energy of pions impinging on the calorimeters during the 2004 Barrel Combined Beam Test at the CERN H8 area. For pion beams with energies between 20 GeV and 180 GeV, the particle energy is reconstructed within 3% and the energy resolution is improved by between 11% and 25% compared to the resolution at the electromagnetic scale.
△ Less
Submitted 12 May, 2011; v1 submitted 20 December, 2010;
originally announced December 2010.
-
Preliminary results of 3D-DDTC pixel detectors for the ATLAS upgrade
Authors:
A. La Rosa,
M. Boscardin,
G. -F. Dalla Betta,
G. Darbo,
C. Gemme,
H. Pernegger,
C. Piemonte,
M. Povoli,
S. Ronchin,
A. Zoboli,
N. Zorzi,
E. Bolle,
M. Borri,
C. Da Via,
S. Dong,
S. Fazio,
P. Grenier,
S. Grinstein,
H. Gjersdal,
P. Hansson,
F. Huegging,
P. Jackson,
M. Kocian,
F. Rivero,
O. Rohne
, et al. (7 additional authors not shown)
Abstract:
3D Silicon sensors fabricated at FBK-irst with the Double-side Double Type Column (DDTC) approach and columnar electrodes only partially etched through p-type substrates were tested in laboratory and in a 1.35 Tesla magnetic field with a 180GeV pion beam at CERN SPS. The substrate thickness of the sensors is about 200um, and different column depths are available, with overlaps between junction c…
▽ More
3D Silicon sensors fabricated at FBK-irst with the Double-side Double Type Column (DDTC) approach and columnar electrodes only partially etched through p-type substrates were tested in laboratory and in a 1.35 Tesla magnetic field with a 180GeV pion beam at CERN SPS. The substrate thickness of the sensors is about 200um, and different column depths are available, with overlaps between junction columns (etched from the front side) and ohmic columns (etched from the back side) in the range from 110um to 150um. The devices under test were bump bonded to the ATLAS Pixel readout chip (FEI3) at SELEX SI (Rome, Italy). We report leakage current and noise measurements, results of functional tests with Am241 gamma-ray sources, charge collection tests with Sr90 beta-source and an overview of preliminary results from the CERN beam test.
△ Less
Submitted 20 October, 2009;
originally announced October 2009.
-
Formation Of A Cold Antihydrogen Beam in AEGIS For Gravity Measurements
Authors:
G. Testera,
A. S. Belov,
G. Bonomi,
I. Boscolo,
N. Brambilla,
R. S. Brusa,
V. M. Byakov,
L. Cabaret,
C. Canali,
C. Carraro,
F. Castelli,
S. Cialdi,
M. de Combarieu,
D. Comparat,
G. Consolati,
N. Djourelov,
M. Doser,
G. Drobychev,
A. Dupasquier,
D. Fabris,
R. Ferragut,
G. Ferrari,
A. Fischer,
A. Fontana,
P. Forget
, et al. (40 additional authors not shown)
Abstract:
The formation of the antihydrogen beam in the AEGIS experiment through the use of inhomogeneous electric fields is discussed and simulation results including the geometry of the apparatus and realistic hypothesis about the antihydrogen initial conditions are shown. The resulting velocity distribution matches the requirements of the gravity experiment. In particular it is shown that the inhomogen…
▽ More
The formation of the antihydrogen beam in the AEGIS experiment through the use of inhomogeneous electric fields is discussed and simulation results including the geometry of the apparatus and realistic hypothesis about the antihydrogen initial conditions are shown. The resulting velocity distribution matches the requirements of the gravity experiment. In particular it is shown that the inhomogeneous electric fields provide radial cooling of the beam during the acceleration.
△ Less
Submitted 30 May, 2008;
originally announced May 2008.
-
A Method to check the Connectivity for the ATLAS TRT Detector
Authors:
N. Ghodbane,
X. Pons,
O. M. Rohne
Abstract:
We report on a technique developed to diagnostic for non working readout channels of the Transition Radiation Tracker (TRT), one of the three inner detectors of the ATLAS experiment. From a detailled study, we show that 99.6 % of the readout channels of the TRT endcap-detector are perfectly operational.
We report on a technique developed to diagnostic for non working readout channels of the Transition Radiation Tracker (TRT), one of the three inner detectors of the ATLAS experiment. From a detailled study, we show that 99.6 % of the readout channels of the TRT endcap-detector are perfectly operational.
△ Less
Submitted 14 October, 2005;
originally announced October 2005.