-
Identifying Highly Deformable van der Waals Layered Chalcogenides with Superior Thermoelectric Performance Using Deformability Factors and Interpretable Machine Learning
Authors:
Qi Ren,
Yingzhuo Lun,
Bonan Zhu,
Gang Tang,
Jiawang Hong
Abstract:
Van der Waals layered chalcogenide-based flexible thermoelectric devices show great potential for applications in wearable electronics. However, materials that are both highly deformable and exhibit superior thermoelectric performance are extremely limited. There is an urgent need for methods that can efficiently predict both deformability and thermoelectric performance to enable high-throughput s…
▽ More
Van der Waals layered chalcogenide-based flexible thermoelectric devices show great potential for applications in wearable electronics. However, materials that are both highly deformable and exhibit superior thermoelectric performance are extremely limited. There is an urgent need for methods that can efficiently predict both deformability and thermoelectric performance to enable high-throughput screening of these materials. In this study, over 1000 van der Waals layered chalcogenides were high-throughput screened from material databases, the deformability of which were predicted with our previously developed deformability factor. An accurate and efficient model based on machine learning methods were developed to predict the thermoelectric properties. Several candidate materials with both deformability and thermoelectric potential were successfully discovered. Among them, NbSe2Br2 was verified by first principles calculations, achieving ZTmax value of 1.35 at 1000K, which is currently the highest value among flexible inorganic thermoelectric materials. And the power factor value of 8.1 μWcm-1K-2 at 300K also surpassed most organic and inorganic flexible thermoelectric materials. Its high deformability mainly attributed to the small slipping energy that allows interlayer slip and the small in-plane modulus that allows deformation before failure. The high ZTmax is mainly contributed by the extremely low thermal conductivity and the high Seebeck coefficient along the out-of-plane direction at high temperature. The high power factor at room temperature is mainly comes from the high conductivity in the in-plane direction. This study is expected to accelerate the development and application of flexible thermoelectric devices based on inorganic semiconductor materials.
△ Less
Submitted 7 October, 2024;
originally announced October 2024.
-
Study of the decay and production properties of $D_{s1}(2536)$ and $D_{s2}^*(2573)$
Authors:
M. Ablikim,
M. N. Achasov,
P. Adlarson,
O. Afedulidis,
X. C. Ai,
R. Aliberti,
A. Amoroso,
Q. An,
Y. Bai,
O. Bakina,
I. Balossino,
Y. Ban,
H. -R. Bao,
V. Batozskaya,
K. Begzsuren,
N. Berger,
M. Berlowski,
M. Bertani,
D. Bettoni,
F. Bianchi,
E. Bianco,
A. Bortone,
I. Boyko,
R. A. Briere,
A. Brueggemann
, et al. (645 additional authors not shown)
Abstract:
The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be…
▽ More
The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be $(35.9\pm 4.8\pm 3.5)\%$ and $(37.4\pm 3.1\pm 4.6)\%$, respectively. The measurements are in tension with predictions based on the assumption that the $D_{s1}(2536)$ and $D_{s2}^*(2573)$ are dominated by a bare $c\bar{s}$ component. The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ cross sections are measured, and a resonant structure at around 4.6~GeV with a width of 50~MeV is observed for the first time with a statistical significance of $15σ$ in the $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ process. It could be the $Y(4626)$ found by the Belle collaboration in the $D_s^+D_{s1}(2536)^{-}$ final state, since they have similar masses and widths. There is also evidence for a structure at around 4.75~GeV in both processes.
△ Less
Submitted 10 July, 2024;
originally announced July 2024.
-
Broadband and fabrication-tolerant 3-dB couplers with topological valley edge modes
Authors:
Guo-Jing Tang,
Xiao-Dong Chen,
Lu Sun,
Chao-Heng Guo,
Meng-Yu Li,
Zhong-Tao Tian,
Hou-Hong Chen,
Hong-Wei Wang,
Qi-Yao Sun,
Ying-Di Pan,
Xin-Tao He,
Yi-Kai Su,
Jian-Wen Dong
Abstract:
3-dB couplers, which are commonly used in photonic integrated circuits for on-chip information processing, precision measurement, and quantum computing, face challenges in achieving robust performance due to their limited 3-dB bandwidths and sensitivity to fabrication errors. To address this, we introduce topological physics to nanophotonics, developing a framework for topological 3-dB couplers. T…
▽ More
3-dB couplers, which are commonly used in photonic integrated circuits for on-chip information processing, precision measurement, and quantum computing, face challenges in achieving robust performance due to their limited 3-dB bandwidths and sensitivity to fabrication errors. To address this, we introduce topological physics to nanophotonics, developing a framework for topological 3-dB couplers. These couplers exhibit broad working wavelength range and robustness against fabrication dimensional errors. By leveraging valley-Hall topology and mirror symmetry, the photonic-crystal-slab couplers achieve ideal 3-dB splitting characterized by a wavelength-insensitive scattering matrix. Tolerance analysis confirms the superiority on broad bandwidth of 48 nm and robust splitting against dimensional errors of 20 nm. We further propose a topological interferometer for on-chip distance measurement, which also exhibits robustness against dimensional errors. This extension of topological principles to the fields of interferometers, may open up new possibilities for constructing robust wavelength division multiplexing, temperature-drift-insensitive sensing, and optical coherence tomography applications.
△ Less
Submitted 25 March, 2024;
originally announced March 2024.
-
Current-induced near-field radiative energy, linear-momentum, and angular-momentum transfer
Authors:
Huimin Zhu,
Gaomin Tang,
Lei Zhang,
Jun Chen
Abstract:
In this paper, we study the near-field radiative energy, linear-momentum, and angular-momentum transfer from a current-biased graphene to nanoparticles. The electric current through the graphene sheet induces nonequilibrium fluctuations, causing energy and momentum transfer even in the absence of a temperature difference. The inherent spin-momentum locking of graphene surface plasmons leads to an…
▽ More
In this paper, we study the near-field radiative energy, linear-momentum, and angular-momentum transfer from a current-biased graphene to nanoparticles. The electric current through the graphene sheet induces nonequilibrium fluctuations, causing energy and momentum transfer even in the absence of a temperature difference. The inherent spin-momentum locking of graphene surface plasmons leads to an in-plane torque perpendicular to the direction of the electric current. In the presence of a temperature difference, the energy transfer is greatly enhanced while the lateral force and torque remain within the same order. Our work explores the potential of utilizing current-biased graphene to manipulate nanoparticles.
△ Less
Submitted 16 February, 2024; v1 submitted 13 December, 2023;
originally announced December 2023.
-
Quantum state resolved molecular dipolar collisions over four decades of energy
Authors:
Guoqiang Tang,
Matthieu Besemer,
Stach Kuijpers,
Gerrit C. Groenenboom,
Ad van der Avoird,
Tijs Karman,
Sebastiaan Y. T. van de Meerakker
Abstract:
Collisions between cold polar molecules represent a fascinating research frontier, but have proven hard to probe experimentally. We report measurements of inelastic cross sections for collisions between NO and ND 3 molecules at energies between 0.1 and 580 cm-1 , with full quantum state resolution. At energies below the 100 cm-1 well depth of the interaction potential, we observed backward glories…
▽ More
Collisions between cold polar molecules represent a fascinating research frontier, but have proven hard to probe experimentally. We report measurements of inelastic cross sections for collisions between NO and ND 3 molecules at energies between 0.1 and 580 cm-1 , with full quantum state resolution. At energies below the 100 cm-1 well depth of the interaction potential, we observed backward glories originating from peculiar U-turn trajectories. At energies below 0.2 cm-1, we observed a breakdown of the Langevin capture model, which we interpreted in terms of a suppressed mutual polarization during the collision, effectively switching off the molecular dipole moments. Scattering calculations based on an ab initio NO-ND3 potential energy surface revealed the crucial role of near-degenerate rotational levels with opposite parity in low-energy dipolar collisions.
△ Less
Submitted 14 February, 2023;
originally announced February 2023.
-
Radiative heat transfer in low-symmetry Bravais crystal
Authors:
ChengLong Zhou,
GaoMing Tang,
Yong Zhang,
Mauro Antezza,
HongLiang Yi
Abstract:
Over the last few years, broken symmetry within crystals has attracted extensive attention since it can improve the control of light propagation. In particular, low-symmetry Bravais crystal can support shear polaritons which has great potential in thermal photonics. In this work, we report a twist-induced near-field thermal control system based on the low-symmetry Bravais crystal medium (\b{eta}-G…
▽ More
Over the last few years, broken symmetry within crystals has attracted extensive attention since it can improve the control of light propagation. In particular, low-symmetry Bravais crystal can support shear polaritons which has great potential in thermal photonics. In this work, we report a twist-induced near-field thermal control system based on the low-symmetry Bravais crystal medium (\b{eta}-Ga2O3). The near-field thermal radiation (NFTR) between such crystal slabs is nearly four orders of magnitude larger than the blackbody limit, exceeding the NFTR from other traditional dielectric materials. Moreover, we show that this crystal can serve as an excellent platform for twist-induced near-field thermal control. Due to the intrinsic shear effect, the twist-induced modulation supported by low-symmetry Bravais crystal exceeds that by high-symmetry crystal. We further clarify how the shear effect affects the twist-induced thermal-radiation modulation supported by hyperbolic and elliptical polaritons and show that the shear effect significantly enhances the twist-induced thermal control induced by the elliptical polariton mode. These results open new directions for thermal-radiation control in low-symmetry materials, including geological minerals, common oxides, and organic crystals.
△ Less
Submitted 7 June, 2022;
originally announced June 2022.
-
Topological photonic crystals: physics, designs and applications
Authors:
Guo-Jing Tang,
Xin-Tao He,
Fu-Long Shi,
Jian-Wei Liu,
Xiao-Dong Chen,
Jian-Wen Dong
Abstract:
The recent research of topological photonics has not only proposed and realized novel topological phenomena such as one-way broadband propagation and robust transport of light, but also designed and fabricated photonic devices with high-performance indexes which are immune to fabrication errors such as defects or disorders. Photonic crystals, which are periodic optical structures with the advantag…
▽ More
The recent research of topological photonics has not only proposed and realized novel topological phenomena such as one-way broadband propagation and robust transport of light, but also designed and fabricated photonic devices with high-performance indexes which are immune to fabrication errors such as defects or disorders. Photonic crystals, which are periodic optical structures with the advantages of good light field confinement and multiple adjusting degrees of freedom, provide a powerful platform to control the flow of light. With the topology defined in the reciprocal space, photonic crystals have been widely used to reveal different topological phases of light and demonstrate topological photonic functionalities. In this review, we present the physics of topological photonic crystals with different dimensions, models and topological phases. The design methods of topological photonic crystals are introduced. Furthermore, we review the applications of topological photonic crystals in passive and active photonics. These researches pave the way of applying topological photonic crystals in practical photonic devices.
△ Less
Submitted 17 January, 2022;
originally announced January 2022.
-
Ancient and recent collisions revealed by phosphate minerals in the Chelyabinsk meteorite
Authors:
Craig R. Walton,
Oliver Shorttle,
Sen Hu,
Auriol S. P. Rae,
Ji Jianglong,
Ana Černok,
Helen Williams,
Yu Liu,
Guoqiang Tang,
Qiuli Li,
Mahesh Anand
Abstract:
The collision history of asteroids is an important archive of inner Solar System evolution. Evidence for these collisions is brought to Earth by meteorites, which can preserve impact-reset radioisotope mineral ages. However, as meteorites often preserve numerous mineral ages, their interpretation is controversial. Here, we combine analysis of phosphate U-Pb ages and mineral microtextures to constr…
▽ More
The collision history of asteroids is an important archive of inner Solar System evolution. Evidence for these collisions is brought to Earth by meteorites, which can preserve impact-reset radioisotope mineral ages. However, as meteorites often preserve numerous mineral ages, their interpretation is controversial. Here, we combine analysis of phosphate U-Pb ages and mineral microtextures to construct a collision history for the highly shocked Chelyabinsk meteorite. We show that phosphate U-Pb ages in the meteorite are independent of thermal history at macro-to-microscales, correlating instead with phosphate microtexture. Isotopic data from pristine phosphate domains is largely concordant, whereas fracture-damaged domains universally display discordance. Combining both populations best constrains upper (4,473 +/- 11 Ma) and lower intercept (-9 +/- 55 Ma, i.e., within error of the present day) U-Pb ages for Chelyabinsk phosphates. We conclude that all phosphate U-Pb ages were completely reset during an ancient high energy collision. Fracture-damaged phosphate domains experienced further Pb-loss during mild collisional heating in the geologically recent past, and must be targeted to properly constrain a lower intercept age. Targeting textural sub-populations of phosphate grains can significantly improve the calculation and interpretation of U-Pb ages, permitting more robust reconstruction of both ancient and recent asteroidal collision histories.
△ Less
Submitted 27 January, 2022; v1 submitted 11 December, 2021;
originally announced December 2021.
-
A flexible film thermocouple temperature sensor
Authors:
Yulong Bao,
Bin Xu,
Huang Wang,
Dandan Yuan,
Xiaoxiao Yan,
Haoxin Shu,
Gang Tang
Abstract:
This article introduces a thin-film thermocouple temperature sensor with symmetrical electrode structure. It uses PI film as a flexible substrate. Cu film and CuNi film made by MEMS manufacturing process as positive and negative electrodes. The device itself has the advantages of miniature, bendable and fast response speed. To reduce the film resistance value. Conducting metal film thickness and s…
▽ More
This article introduces a thin-film thermocouple temperature sensor with symmetrical electrode structure. It uses PI film as a flexible substrate. Cu film and CuNi film made by MEMS manufacturing process as positive and negative electrodes. The device itself has the advantages of miniature, bendable and fast response speed. To reduce the film resistance value. Conducting metal film thickness and sputtering substrate temperature optimization experiments. The critical dimensions of Cu/CuNi film are 650nm and 400nm. The best sputtering substrate temperature for Cu/CuNi films is 100 degrees Celsius and 150 degrees Celsius. Testing the adhesion of thin film thermocouples using the peel-off method. The test result is 9.4N. Finally, the film thermocouple temperature sensor is subjected to a temperature static calibration experiment. The result shows that the actual potential difference error is within 1 degrees Celsius. It belongs to the second class standard in the formulation of thermocouple standards in my country. Through curve fitting, the corresponding relationship between temperature and potential difference is more accurate.
△ Less
Submitted 6 November, 2021;
originally announced November 2021.
-
The linear and nonlinear inverse Compton scattering between microwaves and electrons in a resonant cavity
Authors:
Meiyu Si,
Shanhong Chen,
Yongsheng Huang,
Manqi Ruan,
Guangyi Tang,
Xiaofei Lan,
Yuan Chen,
Xinchou Lou
Abstract:
The new scheme of the energy measurement of the extremely high energy electron beam with the inverse Compton scattering between electrons and microwave photons requires the precise calculation of the interaction cross section of electrons and microwave photons in a resonant cavity. In the local space of the cavity, the electromagnetic field is expressed by Bessel functions. Although Bessel functio…
▽ More
The new scheme of the energy measurement of the extremely high energy electron beam with the inverse Compton scattering between electrons and microwave photons requires the precise calculation of the interaction cross section of electrons and microwave photons in a resonant cavity. In the local space of the cavity, the electromagnetic field is expressed by Bessel functions. Although Bessel functions can form a complete set of orthogonal basis, it is difficult to quantify them directly as fundamental wave functions. Fortunately, with the Fourier expansion of Bessel functions, the local electromagnetic field can be considered as the superposition of a series of plane waves. Therefore, with corresponding corrections of the cross section formula of the classical Compton scattering, the cross section of the linear or nonlinear microwave Compton scattering in the local space can be described accurately. As an important application of our results in astrophysics, corresponding ground verification devices can be designed to perform experimental verifications on the prediction of the Sunyaev-Zeldovich (SZ) effect of the cosmic microwave background radiation. Our results could also provide a new way to generate wave sources with strong practical value, such as the terahertz waves, the ultra-violet (EUV) waves, or the mid-infrared beams.
△ Less
Submitted 23 February, 2023; v1 submitted 30 August, 2021;
originally announced September 2021.
-
Near-field energy transfer between graphene and magneto-optic media
Authors:
Gaomin Tang,
Lei Zhang,
Yong Zhang,
Jun Chen,
C. T. Chan
Abstract:
We consider the near-field radiative energy transfer between two separated parallel plates: graphene supported by a substrate and a magneto-optic medium. We first study the scenario in which the two plates have the same temperature. An electric current through the graphene gives rise to nonequilibrium fluctuations and induces energy transfer. Both the magnitude and direction of the energy flux can…
▽ More
We consider the near-field radiative energy transfer between two separated parallel plates: graphene supported by a substrate and a magneto-optic medium. We first study the scenario in which the two plates have the same temperature. An electric current through the graphene gives rise to nonequilibrium fluctuations and induces energy transfer. Both the magnitude and direction of the energy flux can be controlled by the electric current and an in-plane magnetic field in the magneto-optic medium. This is due to the interplay between the nonreciprocal photon occupation number in the graphene and nonreciprocal surface modes in the magneto-optic plate. Furthermore, we report that a tunable thermoelectric current can be generated in the graphene in the presence of a temperature difference between the two plates.
△ Less
Submitted 9 November, 2021; v1 submitted 31 July, 2021;
originally announced August 2021.
-
The impact and recovery of asteroid 2018 LA
Authors:
Peter Jenniskens,
Mohutsiwa Gabadirwe,
Qing-Zhu Yin,
Alexander Proyer,
Oliver Moses,
Tomas Kohout,
Fulvio Franchi,
Roger L. Gibson,
Richard Kowalski,
Eric J. Christensen,
Alex R. Gibbs,
Aren Heinze,
Larry Denneau,
Davide Farnocchia,
Paul W. Chodas,
William Gray,
Marco Micheli,
Nick Moskovitz,
Christopher A. Onken,
Christian Wolf,
Hadrien A. R. Devillepoix,
Quanzhi Ye,
Darrel K. Robertson,
Peter Brown,
Esko Lyytinen
, et al. (41 additional authors not shown)
Abstract:
The June 2, 2018, impact of asteroid 2018 LA over Botswana is only the second asteroid detected in space prior to impacting over land. Here, we report on the successful recovery of meteorites. Additional astrometric data refine the approach orbit and define the spin period and shape of the asteroid. Video observations of the fireball constrain the asteroid's position in its orbit and were used to…
▽ More
The June 2, 2018, impact of asteroid 2018 LA over Botswana is only the second asteroid detected in space prior to impacting over land. Here, we report on the successful recovery of meteorites. Additional astrometric data refine the approach orbit and define the spin period and shape of the asteroid. Video observations of the fireball constrain the asteroid's position in its orbit and were used to triangulate the location of the fireball's main flare over the Central Kalahari Game Reserve. 23 meteorites were recovered. A consortium study of eight of these classifies Motopi Pan as a HED polymict breccia derived from howardite, cumulate and basaltic eucrite, and diogenite lithologies. Before impact, 2018 LA was a solid rock of about 156 cm diameter with high bulk density about 2.85 g/cm3, a relatively low albedo pV about 0.25, no significant opposition effect on the asteroid brightness, and an impact kinetic energy of about 0.2 kt. The orbit of 2018 LA is consistent with an origin at Vesta (or its Vestoids) and delivery into an Earth-impacting orbit via the nu_6 resonance. The impact that ejected 2018 LA in an orbit towards Earth occurred 22.8 +/- 3.8 Ma ago. Zircons record a concordant U-Pb age of 4563 +/- 11 Ma and a consistent 207Pb/206Pb age of 4563 +/- 6 Ma. A much younger Pb-Pb phosphate resetting age of 4234 +/- 41 Ma was found. From this impact chronology, we discuss what is the possible source crater of Motopi Pan and the age of Vesta's Veneneia impact basin.
△ Less
Submitted 12 May, 2021;
originally announced May 2021.
-
Twist-induced Near-field Thermal Switch Using Nonreciprocal Surface Magnon-Polaritons
Authors:
Jiebin Peng,
Gaomin Tang,
Luqin Wang,
Rair Mac�do,
Hong Chen,
Jie Ren
Abstract:
We explore that two ferromagnetic insulator slabs host a strong twist-induced near-field radiative heat transfer in the presence of twisted magnetic fields. Using the formalism of fluctuational electrodynamics, we find the existence of large twist-induced thermal switch ratio in large damping condition and nonmonotonic twist manipulation for heat transfer in small damping condition, associated wit…
▽ More
We explore that two ferromagnetic insulator slabs host a strong twist-induced near-field radiative heat transfer in the presence of twisted magnetic fields. Using the formalism of fluctuational electrodynamics, we find the existence of large twist-induced thermal switch ratio in large damping condition and nonmonotonic twist manipulation for heat transfer in small damping condition, associated with the different twist-induced effects of nonreciprocal elliptic surface magnon-polaritons, hyperbolic surface magnon-polaritons, and twist-non-resonant surface magnon-polaritons. Moreover, the near-field radiative heat transfer can be significantly enhanced by the twist-non-resonant surface magnon-polaritons in the ultra-small damping condition. Such twist-induced effect is applicable for other kinds of anisotropic slabs with timereversal symmetry breaking. Our findings provide a way to twisted and magnetic control in nanoscale thermal management and improve it with twistronics concepts.
△ Less
Submitted 29 December, 2020;
originally announced December 2020.
-
Twist-induced control of near-field heat radiation between magnetic Weyl semimetals
Authors:
Gaomin Tang,
Jun Chen,
Lei Zhang
Abstract:
Due to the large anomalous Hall effect, magnetic Weyl semimetals can support nonreciprocal surface plasmon polariton modes in the absence of an external magnetic field. This implies that magnetic Weyl semimetals can find novel application in (thermal) photonics. In this work, we consider the near-field radiative heat transfer between two magnetic Weyl semimetal slabs and show that the heat transfe…
▽ More
Due to the large anomalous Hall effect, magnetic Weyl semimetals can support nonreciprocal surface plasmon polariton modes in the absence of an external magnetic field. This implies that magnetic Weyl semimetals can find novel application in (thermal) photonics. In this work, we consider the near-field radiative heat transfer between two magnetic Weyl semimetal slabs and show that the heat transfer can be controlled with a relative rotation of the parallel slabs. Thanks to the intrinsic nonreciprocity of the surface modes, this so-called twisting method does not require surface structuring like periodic gratings. The twist-induced control of heat transfer is due to the mismatch of the surface modes from the two slabs with a relative rotation.
△ Less
Submitted 3 February, 2021; v1 submitted 23 December, 2020;
originally announced December 2020.
-
Frequency-dependent topological phases and photonic detouring in valley photonic crystals
Authors:
Guo-Jing Tang,
Xiao-Dong Chen,
Fu-Long Shi,
Jian-Wei Liu,
Min Chen,
Jian-Wen Dong
Abstract:
Here, the frequency degree of freedom is introduced into valley photonic crystals with dual band gaps. Based on the high-order plane wave expansion model, we derive an effective Hamiltonian which characterizes dual band gaps. Metallic valley photonic crystals are demonstrated as examples in which all four topological phases are found. At the domain walls between topologically distinct valley photo…
▽ More
Here, the frequency degree of freedom is introduced into valley photonic crystals with dual band gaps. Based on the high-order plane wave expansion model, we derive an effective Hamiltonian which characterizes dual band gaps. Metallic valley photonic crystals are demonstrated as examples in which all four topological phases are found. At the domain walls between topologically distinct valley photonic crystals, frequency-dependent edge states are demonstrated and a broadband photonic detouring is proposed. Our findings provide the guidance for designing the frequency-dependent property of topological structures and show its potential applications in wavelength division multiplexers.
△ Less
Submitted 17 May, 2020;
originally announced May 2020.
-
TurboPy: A Lightweight Python Framework for Computational Physics
Authors:
A. S. Richardson,
D. F. Gordon,
S. B. Swanekamp,
I. M. Rittersdorf,
P. E. Adamson,
O. S. Grannis,
G. T. Morgan,
A. Ostenfeld,
K. L. Phlips,
C. G. Sun,
G. Tang,
D. J. Watkins
Abstract:
Computational physics problems often have a common set of aspects to them that any particular numerical code will have to address. Because these aspects are common to many problems, having a framework already designed and ready to use will not only speed the development of new codes, but also enhance compatibility between codes. Some of the most common aspects of computational physics problems are…
▽ More
Computational physics problems often have a common set of aspects to them that any particular numerical code will have to address. Because these aspects are common to many problems, having a framework already designed and ready to use will not only speed the development of new codes, but also enhance compatibility between codes. Some of the most common aspects of computational physics problems are: a grid, a clock which tracks the flow of the simulation, and a set of models describing the dynamics of various quantities on the grid. Having a framework that could deal with these basic aspects of the simulation in a common way could provide great value to computational scientists by solving various numerical and class design issues that routinely arise. This paper describes the newly developed computational framework that we have built for rapidly prototyping new physics codes. This framework, called turboPy, is a lightweight physics modeling framework based on the design of the particle-in-cell code turboWAVE. It implements a class (called Simulation) which drives the simulation and manages communication between physics modules, a class (called PhysicsModule) which handles the details of the dynamics of the various parts of the problem, and some additional classes such as a Grid class and a Diagnostic class to handle various ancillary issues that commonly arise.
△ Less
Submitted 9 September, 2020; v1 submitted 20 February, 2020;
originally announced February 2020.
-
Water-phospholipid interactions at the interface of lipid membranes: comparison of different force fields
Authors:
Jianjun Jiang,
Weixin Li,
Liang Zhao,
Yuanyan Wu,
Peng Xiu,
Guoning Tang,
Yusong Tu
Abstract:
Water-phospholipid interactions at the lipid bilayer/water interfaces are of essential importance for the dynamics, stability and function of biological membrane, and are also strongly associated with numerous biological processes at the interfaces of lipid bilayers. Various force fields, such as the united-atom Berger force field, its two improved versions by Kukol and by Poger, and the all-atom…
▽ More
Water-phospholipid interactions at the lipid bilayer/water interfaces are of essential importance for the dynamics, stability and function of biological membrane, and are also strongly associated with numerous biological processes at the interfaces of lipid bilayers. Various force fields, such as the united-atom Berger force field, its two improved versions by Kukol and by Poger, and the all-atom Slipid force field developed recently, can be applied to simulating the structures of lipid bilayer, with their structural predictions in good agreement with experimental data. In this work, we show that despite the similarity in structural predictions of lipid bilayers, there are observable differences in formation of hydrogen bonds and the interaction energy profiles between water and phospholipid groups at the lipid bilayer/water interfaces, when four force fields for dipalmitoylphosphatidylcholine (DPPC) phospholipids are employed in molecular dynamics simulations. In particular, the Slipid force field yields more hydrogen bonds between water and phospholipids and more symmetrical interaction energy distributions for the two carboxylic groups on their respective acyl tails, compared to the Berger and its two improved force fields. These differences are mainly attributed to the different interfacial water distributions and ability to form hydrogen bonds between interfacial water and oxygen atoms of the DPPC lipids using different force fields. These results would be helpful in understanding the behaviors of water as well as its interaction with phospholipids at the lipid bilayer/water interfaces, and provide a guide for making the appropriate choice on the force field in simulations of lipid bilayers.
△ Less
Submitted 3 January, 2018; v1 submitted 27 February, 2016;
originally announced February 2016.
-
Experimental robustness of Fourier Ptychography phase retrieval algorithms
Authors:
Li-Hao Yeh,
Jonathan Dong,
Jingshan Zhong,
Lei Tian,
Michael Chen,
Gongguo Tang,
Mahdi Soltanolkotabi,
Laura Waller
Abstract:
Fourier ptychography is a new computational microscopy technique that provides gigapixel-scale intensity and phase images with both wide field-of-view and high resolution. By capturing a stack of low-resolution images under different illumination angles, a nonlinear inverse algorithm can be used to computationally reconstruct the high-resolution complex field. Here, we compare and classify multipl…
▽ More
Fourier ptychography is a new computational microscopy technique that provides gigapixel-scale intensity and phase images with both wide field-of-view and high resolution. By capturing a stack of low-resolution images under different illumination angles, a nonlinear inverse algorithm can be used to computationally reconstruct the high-resolution complex field. Here, we compare and classify multiple proposed inverse algorithms in terms of experimental robustness. We find that the main sources of error are noise, aberrations and mis-calibration (i.e. model mis-match). Using simulations and experiments, we demonstrate that the choice of cost function plays a critical role, with amplitude-based cost functions performing better than intensity-based ones. The reason for this is that Fourier ptychography datasets consist of images from both brightfield and darkfield illumination, representing a large range of measured intensities. Both noise (e.g. Poisson noise) and model mis-match errors are shown to scale with intensity. Hence, algorithms that use an appropriate cost function will be more tolerant to both noise and model mis-match. Given these insights, we propose a global Newton's method algorithm which is robust and computationally efficient. Finally, we discuss the impact of procedures for algorithmic correction of aberrations and mis-calibration.
△ Less
Submitted 18 December, 2015; v1 submitted 9 November, 2015;
originally announced November 2015.
-
Improved axisymmetric lattice Boltzmann scheme
Authors:
Q. Li,
Y. L. He,
G. H. Tang,
W. Q. Tao
Abstract:
This paper proposes an improved lattice Boltzmann scheme for incompressible axisymmetric flows. The scheme has the following features. First, it is still within the framework of the standard lattice Boltzmann method using the single-particle density distribution function and consistent with the philosophy of the lattice Boltzmann method. Second, the source term of the scheme is simple and contai…
▽ More
This paper proposes an improved lattice Boltzmann scheme for incompressible axisymmetric flows. The scheme has the following features. First, it is still within the framework of the standard lattice Boltzmann method using the single-particle density distribution function and consistent with the philosophy of the lattice Boltzmann method. Second, the source term of the scheme is simple and contains no velocity gradient terms. Owing to this feature, the scheme is easy to implement. In addition, the singularity problem at the axis can be appropriately handled without affecting an important advantage of the lattice Boltzmann method: the easy treatment of boundary conditions. The scheme is tested by simulating Hagen-Poiseuille flow, three-dimensional Womersley flow, Wheeler benchmark problem in crystal growth, and lid-driven rotational flow in cylindrical cavities. It is found that the numerical results agree well with the analytical solutions and/or the results reported in previous studies.
△ Less
Submitted 1 March, 2010;
originally announced March 2010.
-
Lattice-Boltzmann model for axisymmetric thermal flows
Authors:
Q. Li,
Y. L. He,
G. H. Tang,
W. Q. Tao
Abstract:
In this brief report, a thermal lattice-Boltzmann (LB) model is presented for axisymmetric thermal flows in the incompressible limit. The model is based on the double-distribution-function LB method, which has attracted much attention since its emergence for its excellent numerical stability. Compared with the existing axisymmetric thermal LB models, the present model is simpler and retains the…
▽ More
In this brief report, a thermal lattice-Boltzmann (LB) model is presented for axisymmetric thermal flows in the incompressible limit. The model is based on the double-distribution-function LB method, which has attracted much attention since its emergence for its excellent numerical stability. Compared with the existing axisymmetric thermal LB models, the present model is simpler and retains the inherent features of the standard LB method. Numerical simulations are carried out for the thermally developing laminar flows in circular ducts and the natural convection in an annulus between two coaxial vertical cylinders. The Nusselt number obtained from the simulations agrees well with the analytical solutions and/or the results reported in previous studies.
△ Less
Submitted 25 May, 2009; v1 submitted 19 May, 2009;
originally announced May 2009.
