Anthos Service Mesh and Traffic Director are now Cloud Service Mesh. For more information, see the Cloud Service Mesh overview.

Set up an Envoy sidecar service mesh

This configuration is supported for Preview customers but we do not recommended it for new Cloud Service Mesh users. For more information, see the Cloud Service Mesh overview.

This guide demonstrates how to configure a simple service mesh in your Fleet. The guide includes the following steps:

Deploying the Envoy sidecar injector into the cluster. The injector injects the Envoy proxy container into application Pods.
Deploying Gateway API resources that configure the Envoy sidecar in the service mesh to route requests to an example service in the namespace store.
Deploying a simple client to verify the deployment.

The following diagram shows the configured service mesh.

An Envoy sidecar service mesh in a Fleet (click to enlarge)

You can configure only one Mesh in a cluster, because the mesh name in the sidecar injector configuration and the Mesh resource's name must be identical.

Deploy the Envoy sidecar injector

To deploy the sidecar injector,

Configure project information

# The project that contains your GKE cluster.
export CLUSTER_PROJECT_ID=YOUR_CLUSTER_PROJECT_NUMBER_HERE
# The name of your GKE cluster.
export CLUSTER=YOUR_CLUSTER_NAME
# The channel of your GKE cluster. Eg: rapid, regular, stable.
export CHANNEL=YOUR_CLUSTER_CHANNEL
# The location of your GKE cluster, Eg: us-central1 for regional GKE cluster,
# us-central1-a for zonal GKE cluster
export LOCATION=ZONE

# The mesh name of the traffic director load balancing API.
export MESH_NAME=YOUR_MESH_NAME
# The project that holds the mesh resources.
export MESH_PROJECT_NUMBER=YOUR_PROJECT_NUMBER_HERE

export TARGET=projects/${MESH_PROJECT_NUMBER}/locations/global/meshes/${MESH_NAME}

gcloud config set project ${CLUSTER_PROJECT_ID}

To find out the MESH_NAME, assign the value as follows, where MESH_NAME is the value of the field metadata.name in the Mesh resource spec:

gketd-MESH_NAME

For example, if the value of metadata.name in the Mesh resource is butterfly-mesh, set the value of MESH_NAME as follows:

export MESH_NAME="gketd-butterfly-mesh"

Apply the configurations for Mutating Webhook

The following sections provide instructions apply the MutatingWebhookConfiguration to the cluster. When a pod is created, the in-cluster admission controller is invoked. The admission controller, talks to the managed sidecar injector to add the Envoy container to the pod.

Apply the following mutating webhook configurations to your cluster.

cat <<EOF | kubectl apply -f -
apiVersion: admissionregistration.k8s.io/v1
kind: MutatingWebhookConfiguration
metadata:
  labels:
    app: sidecar-injector
  name: td-mutating-webhook
webhooks:
- admissionReviewVersions:
  - v1beta1
  - v1
  clientConfig:
    url: https://meshconfig.googleapis.com/v1internal/projects/${CLUSTER_PROJECT_ID}/locations/${LOCATION}/clusters/${CLUSTER}/channels/${CHANNEL}/targets/${TARGET}:tdInject
  failurePolicy: Fail
  matchPolicy: Exact
  name: namespace.sidecar-injector.csm.io
  namespaceSelector:
    matchExpressions:
    - key: td-injection
      operator: Exists
  reinvocationPolicy: Never
  rules:
  - apiGroups:
    - ""
    apiVersions:
    - v1
    operations:
    - CREATE
    resources:
    - pods
    scope: '*'
  sideEffects: None
  timeoutSeconds: 30
EOF

If you need to customize the sidecar injector, following these steps to customize the sidecar injector to your cluster:

Configuring TLS for sidecar injector.
Enable sidecar injection.
Options for automatic Envoy injections

Deploy the `store` service

In this section, you deploy the store service in the mesh.

In the store.yaml file, save the following manifest:

kind: Namespace
apiVersion: v1
metadata:
  name: store
---
apiVersion: apps/v1
kind: Deployment
metadata:
  name: store
  namespace: store
spec:
  replicas: 2
  selector:
    matchLabels:
      app: store
      version: v1
  template:
    metadata:
      labels:
        app: store
        version: v1
    spec:
      containers:
      - name: whereami
        image: gcr.io/google-samples/whereami:v1.2.20
        ports:
        - containerPort: 8080
---
apiVersion: v1
kind: Service
metadata:
  name: store
  namespace: store
spec:
  selector:
    app: store
  ports:
  - port: 8080
    targetPort: 8080

Apply the manifest to gke-1:
```
kubectl apply -f store.yaml
```

Create a service mesh

In the mesh.yaml file, save the following mesh manifest. The name of the mesh resource needs to match with the mesh name specified in the injector configmap. In this example configuration, the name td-mesh is used in both places:
```
apiVersion: net.gke.io/v1alpha1
kind: TDMesh
metadata:
  name: td-mesh
  namespace: default
spec:
  gatewayClassName: gke-td
  allowedRoutes:
    namespaces:
      from: All
```
Apply the mesh manifest to gke-1, which creates a logical mesh with the name td-mesh:
```
kubectl apply -f mesh.yaml
```

In the store-route.yaml file, save the following HTTPRoute manifest. The manifest defines an HTTPRoute resource that routes HTTP traffic specifying the hostname example.com to a Kubernetes service store in the namespace store:

apiVersion: gateway.networking.k8s.io/v1alpha2
kind: HTTPRoute
metadata:
  name: store-route
  namespace: store
spec:
  parentRefs:
  - name: td-mesh
    namespace: default
    group: net.gke.io
    kind: TDMesh
  hostnames:
  - "example.com"
  rules:
  - backendRefs:
    - name: store
      namespace: store
      port: 8080

Apply the route manifest to gke-1:
```
kubectl apply -f store-route.yaml
```

Validate the deployment

Inspect the Mesh status and events to validate that the Mesh and HTTPRoute resources are successfully deployed:

kubectl describe tdmesh td-mesh

The output is similar to the following:

...

Status:
  Conditions:
    Last Transition Time:  2022-04-14T22:08:39Z
    Message:
    Reason:                MeshReady
    Status:                True
    Type:                  Ready
    Last Transition Time:  2022-04-14T22:08:28Z
    Message:
    Reason:                Scheduled
    Status:                True
    Type:                  Scheduled
Events:
  Type    Reason  Age   From                Message
  ----    ------  ----  ----                -------
  Normal  ADD     36s   mc-mesh-controller  Processing mesh default/td-mesh
  Normal  UPDATE  35s   mc-mesh-controller  Processing mesh default/td-mesh
  Normal  SYNC    24s   mc-mesh-controller  SYNC on default/td-mesh was a success

To make sure that sidecar injection is enabled in the default namespace, run the following command:
```
kubectl get namespace default --show-labels
```
If sidecar injection is enabled, you see the following in the output:
```
istio-injection=enabled
```
If sidecar injection is not enabled, see Enable sidecar injections.

To verify the deployment, deploy a client Pod that serves as a client to the store service defined previously. In the client.yaml file, save the following:

apiVersion: apps/v1
kind: Deployment
metadata:
  labels:
    run: client
  name: client
  namespace: default
spec:
  replicas: 1
  selector:
    matchLabels:
      run: client
  template:
    metadata:
      labels:
        run: client
    spec:
      containers:
      - name: client
        image: curlimages/curl
        command:
        - sh
        - -c
        - while true; do sleep 1; done

Deploy the spec:
```
kubectl apply -f client.yaml
```
The sidecar injector running in the cluster automatically injects an Envoy container into the client Pod.

To verify that the Envoy container is injected, run the following command:

kubectl describe pods -l run=client

The output is similar to the following:

...
Init Containers:
  # Istio-init sets up traffic interception for the Pod.
  istio-init:
...
  # td-bootstrap-writer generates the Envoy bootstrap file for the Envoy container
  td-bootstrap-writer:
...
Containers:
# client is the client container that runs application code.
  client:
...
# Envoy is the container that runs the injected Envoy proxy.
  envoy:
...

After the client Pod is provisioned, send a request from the client Pod to the store service.

Get the name of the client Pod:

CLIENT_POD=$(kubectl get pod -l run=client -o=jsonpath='{.items[0].metadata.name}')

# The VIP where the following request will be sent. Because all requests
# from the client container are redirected to the Envoy proxy sidecar, you
# can use any IP address, including 10.0.0.2, 192.168.0.1, and others.
VIP='10.0.0.1'

Send a request to store service and output the response headers:
```
TEST_CMD="curl -v -H 'host: example.com' $VIP"
```

Execute the test command in the client container:

kubectl exec -it $CLIENT_POD -c client -- /bin/sh -c "$TEST_CMD"

The output is similar to the following:

< Trying 10.0.0.1:80...
< Connected to 10.0.0.1 (10.0.0.1) port 80 (#0)
< GET / HTTP/1.1
< Host: example.com
< User-Agent: curl/7.82.0-DEV
< Accept: */*
<
< Mark bundle as not supporting multiuse
< HTTP/1.1 200 OK
< content-type: application/json
< content-length: 318
< access-control-allow-origin: *
< server: envoy
< date: Tue, 12 Apr 2022 22:30:13 GMT
<
{
  "cluster_name": "gke-1",
  "zone": "us-west1-a",
  "host_header": "example.com",
  ...
}

What's next

Learn how to troubleshoot issues with your deployment.

Set up an Envoy sidecar service mesh

Deploy the Envoy sidecar injector

Deploy the store service

Create a service mesh

Validate the deployment

What's next

Deploy the `store` service